leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

V4L/DVB (6854): xc2028: be more specific about when applying offset for 7MHz channels

Browse Source 
We have been inserting a mystery 500kHz offset for tuning 7MHz channels,
however some experimentation reveals it is only needed under certain
conditions with specific firmware combinations.  Document these and only
apply the offset when we know it is required.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Chris Pascoe 2007-12-02 09:39:18 -03:00 committed by Mauro Carvalho Chehab
parent 9ca01e780f
commit 897b842296
1 changed files with 10 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/media/video/tuner-xc2028.c
View File

@ -875,7 +875,16 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
rc = send_seq(priv, {0x00, 0x00});
} else {
offset = 2750000;
if (priv->cur_fw.type & DTV7)
/*
* We must adjust the offset by 500kHz in two cases in order
* to correctly center the IF output:
* 1) When the ZARLINK456 or DIBCOM52 tables were explicitly
* selected and a 7MHz channel is tuned;
* 2) When tuning a VHF channel with DTV78 firmware.
*/
if (((priv->cur_fw.type & DTV7) &&
(priv->cur_fw.scode_table & (ZARLINK456 | DIBCOM52))) ||
((priv->cur_fw.type & DTV78) && freq < 470000000))
offset -= 500000;
}