leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

devicetree: bindings: Make msm8974-pinctrl documentation match code

Browse Source 
The compatible string doesn't have an x in it. Fix it. Also
remove the "qcom" prefix from pins and functions as this binding
uses the generic pinctrl bindings for the pins and functions.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Stephen Boyd 2014-02-26 11:12:23 -08:00 committed by Linus Walleij
parent e6fae2d03d
commit 893a7d11a1
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
View File

@ -1,7 +1,7 @@
Qualcomm MSM8974 TLMM block
Required properties:
- compatible: "qcom,msm8x74-pinctrl"
- compatible: "qcom,msm8974-pinctrl"
- reg: Should be the base address and length of the TLMM block.
- interrupts: Should be the parent IRQ of the TLMM block.
- interrupt-controller: Marks the device node as an interrupt controller.
@ -42,14 +42,14 @@ Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins.
Valid values for qcom,pins are:
Valid values for pins are:
gpio0-gpio145
Supports mux, bias and drive-strength
sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
Supports bias and drive-strength
Valid values for qcom,function are:
Valid values for function are:
blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus
(Note that this is not yet the complete list of functions)
@ -73,18 +73,18 @@ Example:
uart2_default: uart2_default {
mux {
qcom,pins = "gpio4", "gpio5";
qcom,function = "blsp_uart2";
pins = "gpio4", "gpio5";
function = "blsp_uart2";
};
tx {
qcom,pins = "gpio4";
pins = "gpio4";
drive-strength = <4>;
bias-disable;
};
rx {
qcom,pins = "gpio5";
pins = "gpio5";
drive-strength = <2>;
bias-pull-up;
};