Merge branch 'qed-ethtool-ops'

Yuval Mintz says:

====================
qede/qed: Implement various ethtool operations

This series adds several new ethtool operations to qede:
  - {get, set}_channels
  - {get, set}_ringparam
  - set_phys_id
  - nway_reset
  - {get, set}_pauseparam
As well as extending the qed APIs to support these commands.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_hsi.h

@@ -3993,6 +3993,8 @@ struct public_drv_mb {
 #define DRV_MSG_CODE_PHY_CORE_WRITE             0x000e0000
 #define DRV_MSG_CODE_SET_VERSION                0x000f0000
 
+#define DRV_MSG_CODE_SET_LED_MODE               0x00200000
+
 #define DRV_MSG_SEQ_NUMBER_MASK                 0x0000ffff
 
 	u32 drv_mb_param;
@@ -4044,6 +4046,10 @@ struct public_drv_mb {
 #define DRV_MB_PARAM_CFG_VF_MSIX_SB_NUM_SHIFT   8
 #define DRV_MB_PARAM_CFG_VF_MSIX_SB_NUM_MASK    0x0000FF00
 
+#define DRV_MB_PARAM_SET_LED_MODE_OPER          0x0
+#define DRV_MB_PARAM_SET_LED_MODE_ON            0x1
+#define DRV_MB_PARAM_SET_LED_MODE_OFF           0x2
+
 	u32 fw_mb_header;
 #define FW_MSG_CODE_MASK                        0xffff0000
 #define FW_MSG_CODE_DRV_LOAD_ENGINE             0x10100000

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -1135,6 +1135,23 @@ static int qed_drain(struct qed_dev *cdev)
 	return 0;
 }
 
+static int qed_set_led(struct qed_dev *cdev, enum qed_led_mode mode)
+{
+	struct qed_hwfn *hwfn = QED_LEADING_HWFN(cdev);
+	struct qed_ptt *ptt;
+	int status = 0;
+
+	ptt = qed_ptt_acquire(hwfn);
+	if (!ptt)
+		return -EAGAIN;
+
+	status = qed_mcp_set_led(hwfn, ptt, mode);
+
+	qed_ptt_release(hwfn, ptt);
+
+	return status;
+}
+
 const struct qed_common_ops qed_common_ops_pass = {
 	.probe = &qed_probe,
 	.remove = &qed_remove,
@@ -1155,6 +1172,7 @@ const struct qed_common_ops qed_common_ops_pass = {
 	.update_msglvl = &qed_init_dp,
 	.chain_alloc = &qed_chain_alloc,
 	.chain_free = &qed_chain_free,
+	.set_led = &qed_set_led,
 };
 
 u32 qed_get_protocol_version(enum qed_protocol protocol)

drivers/net/ethernet/qlogic/qed/qed_mcp.c

@@ -858,3 +858,30 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn,
 
 	return 0;
 }
+
+int qed_mcp_set_led(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		    enum qed_led_mode mode)
+{
+	u32 resp = 0, param = 0, drv_mb_param;
+	int rc;
+
+	switch (mode) {
+	case QED_LED_MODE_ON:
+		drv_mb_param = DRV_MB_PARAM_SET_LED_MODE_ON;
+		break;
+	case QED_LED_MODE_OFF:
+		drv_mb_param = DRV_MB_PARAM_SET_LED_MODE_OFF;
+		break;
+	case QED_LED_MODE_RESTORE:
+		drv_mb_param = DRV_MB_PARAM_SET_LED_MODE_OPER;
+		break;
+	default:
+		DP_NOTICE(p_hwfn, "Invalid LED mode %d\n", mode);
+		return -EINVAL;
+	}
+
+	rc = qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_SET_LED_MODE,
+			 drv_mb_param, &resp, &param);
+
+	return rc;
+}

drivers/net/ethernet/qlogic/qed/qed_mcp.h

@@ -224,6 +224,19 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn,
 			 struct qed_ptt *p_ptt,
 			 struct qed_mcp_drv_version *p_ver);
 
+/**
+ * @brief Set LED status
+ *
+ *  @param p_hwfn
+ *  @param p_ptt
+ *  @param mode - LED mode
+ *
+ * @return int - 0 - operation was successful.
+ */
+int qed_mcp_set_led(struct qed_hwfn *p_hwfn,
+		    struct qed_ptt *p_ptt,
+		    enum qed_led_mode mode);
+
 /* Using hwfn number (and not pf_num) is required since in CMT mode,
  * same pf_num may be used by two different hwfn
  * TODO - this shouldn't really be in .h file, but until all fields

drivers/net/ethernet/qlogic/qede/qede.h

@@ -116,6 +116,7 @@ struct qede_dev {
 				 (edev)->dev_info.num_tc)
 
 	struct qede_fastpath		*fp_array;
+	u16				req_rss;
 	u16				num_rss;
 	u8				num_tc;
 #define QEDE_RSS_CNT(edev)		((edev)->num_rss)
@@ -269,13 +270,13 @@ int qede_change_mtu(struct net_device *dev, int new_mtu);
 void qede_fill_by_demand_stats(struct qede_dev *edev);
 
 #define RX_RING_SIZE_POW	13
-#define RX_RING_SIZE		BIT(RX_RING_SIZE_POW)
+#define RX_RING_SIZE		((u16)BIT(RX_RING_SIZE_POW))
 #define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
 #define NUM_RX_BDS_MIN		128
 #define NUM_RX_BDS_DEF		NUM_RX_BDS_MAX
 
 #define TX_RING_SIZE_POW	13
-#define TX_RING_SIZE		BIT(TX_RING_SIZE_POW)
+#define TX_RING_SIZE		((u16)BIT(TX_RING_SIZE_POW))
 #define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
 #define NUM_TX_BDS_MIN		128
 #define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX

drivers/net/ethernet/qlogic/qede/qede_ethtool.c

@@ -322,6 +322,30 @@ static void qede_set_msglevel(struct net_device *ndev, u32 level)
 					 dp_module, dp_level);
 }
 
+static int qede_nway_reset(struct net_device *dev)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+	struct qed_link_output current_link;
+	struct qed_link_params link_params;
+
+	if (!netif_running(dev))
+		return 0;
+
+	memset(&current_link, 0, sizeof(current_link));
+	edev->ops->common->get_link(edev->cdev, &current_link);
+	if (!current_link.link_up)
+		return 0;
+
+	/* Toggle the link */
+	memset(&link_params, 0, sizeof(link_params));
+	link_params.link_up = false;
+	edev->ops->common->set_link(edev->cdev, &link_params);
+	link_params.link_up = true;
+	edev->ops->common->set_link(edev->cdev, &link_params);
+
+	return 0;
+}
+
 static u32 qede_get_link(struct net_device *dev)
 {
 	struct qede_dev *edev = netdev_priv(dev);
@@ -333,6 +357,106 @@ static u32 qede_get_link(struct net_device *dev)
 	return current_link.link_up;
 }
 
+static void qede_get_ringparam(struct net_device *dev,
+			       struct ethtool_ringparam *ering)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+
+	ering->rx_max_pending = NUM_RX_BDS_MAX;
+	ering->rx_pending = edev->q_num_rx_buffers;
+	ering->tx_max_pending = NUM_TX_BDS_MAX;
+	ering->tx_pending = edev->q_num_tx_buffers;
+}
+
+static int qede_set_ringparam(struct net_device *dev,
+			      struct ethtool_ringparam *ering)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+
+	DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+		   "Set ring params command parameters: rx_pending = %d, tx_pending = %d\n",
+		   ering->rx_pending, ering->tx_pending);
+
+	/* Validate legality of configuration */
+	if (ering->rx_pending > NUM_RX_BDS_MAX ||
+	    ering->rx_pending < NUM_RX_BDS_MIN ||
+	    ering->tx_pending > NUM_TX_BDS_MAX ||
+	    ering->tx_pending < NUM_TX_BDS_MIN) {
+		DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+			   "Can only support Rx Buffer size [0%08x,...,0x%08x] and Tx Buffer size [0x%08x,...,0x%08x]\n",
+			   NUM_RX_BDS_MIN, NUM_RX_BDS_MAX,
+			   NUM_TX_BDS_MIN, NUM_TX_BDS_MAX);
+		return -EINVAL;
+	}
+
+	/* Change ring size and re-load */
+	edev->q_num_rx_buffers = ering->rx_pending;
+	edev->q_num_tx_buffers = ering->tx_pending;
+
+	if (netif_running(edev->ndev))
+		qede_reload(edev, NULL, NULL);
+
+	return 0;
+}
+
+static void qede_get_pauseparam(struct net_device *dev,
+				struct ethtool_pauseparam *epause)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+	struct qed_link_output current_link;
+
+	memset(&current_link, 0, sizeof(current_link));
+	edev->ops->common->get_link(edev->cdev, &current_link);
+
+	if (current_link.pause_config & QED_LINK_PAUSE_AUTONEG_ENABLE)
+		epause->autoneg = true;
+	if (current_link.pause_config & QED_LINK_PAUSE_RX_ENABLE)
+		epause->rx_pause = true;
+	if (current_link.pause_config & QED_LINK_PAUSE_TX_ENABLE)
+		epause->tx_pause = true;
+
+	DP_VERBOSE(edev, QED_MSG_DEBUG,
+		   "ethtool_pauseparam: cmd %d  autoneg %d  rx_pause %d  tx_pause %d\n",
+		   epause->cmd, epause->autoneg, epause->rx_pause,
+		   epause->tx_pause);
+}
+
+static int qede_set_pauseparam(struct net_device *dev,
+			       struct ethtool_pauseparam *epause)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+	struct qed_link_params params;
+	struct qed_link_output current_link;
+
+	if (!edev->dev_info.common.is_mf) {
+		DP_INFO(edev,
+			"Pause parameters can not be updated in non-default mode\n");
+		return -EOPNOTSUPP;
+	}
+
+	memset(&current_link, 0, sizeof(current_link));
+	edev->ops->common->get_link(edev->cdev, &current_link);
+
+	memset(&params, 0, sizeof(params));
+	params.override_flags |= QED_LINK_OVERRIDE_PAUSE_CONFIG;
+	if (epause->autoneg) {
+		if (!(current_link.supported_caps & SUPPORTED_Autoneg)) {
+			DP_INFO(edev, "autoneg not supported\n");
+			return -EINVAL;
+		}
+		params.pause_config |= QED_LINK_PAUSE_AUTONEG_ENABLE;
+	}
+	if (epause->rx_pause)
+		params.pause_config |= QED_LINK_PAUSE_RX_ENABLE;
+	if (epause->tx_pause)
+		params.pause_config |= QED_LINK_PAUSE_TX_ENABLE;
+
+	params.link_up = true;
+	edev->ops->common->set_link(edev->cdev, &params);
+
+	return 0;
+}
+
 static void qede_update_mtu(struct qede_dev *edev, union qede_reload_args *args)
 {
 	edev->ndev->mtu = args->mtu;
@@ -366,17 +490,104 @@ int qede_change_mtu(struct net_device *ndev, int new_mtu)
 	return 0;
 }
 
+static void qede_get_channels(struct net_device *dev,
+			      struct ethtool_channels *channels)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+
+	channels->max_combined = QEDE_MAX_RSS_CNT(edev);
+	channels->combined_count = QEDE_RSS_CNT(edev);
+}
+
+static int qede_set_channels(struct net_device *dev,
+			     struct ethtool_channels *channels)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+
+	DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+		   "set-channels command parameters: rx = %d, tx = %d, other = %d, combined = %d\n",
+		   channels->rx_count, channels->tx_count,
+		   channels->other_count, channels->combined_count);
+
+	/* We don't support separate rx / tx, nor `other' channels. */
+	if (channels->rx_count || channels->tx_count ||
+	    channels->other_count || (channels->combined_count == 0) ||
+	    (channels->combined_count > QEDE_MAX_RSS_CNT(edev))) {
+		DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+			   "command parameters not supported\n");
+		return -EINVAL;
+	}
+
+	/* Check if there was a change in the active parameters */
+	if (channels->combined_count == QEDE_RSS_CNT(edev)) {
+		DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+			   "No change in active parameters\n");
+		return 0;
+	}
+
+	/* We need the number of queues to be divisible between the hwfns */
+	if (channels->combined_count % edev->dev_info.common.num_hwfns) {
+		DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN),
+			   "Number of channels must be divisable by %04x\n",
+			   edev->dev_info.common.num_hwfns);
+		return -EINVAL;
+	}
+
+	/* Set number of queues and reload if necessary */
+	edev->req_rss = channels->combined_count;
+	if (netif_running(dev))
+		qede_reload(edev, NULL, NULL);
+
+	return 0;
+}
+
+static int qede_set_phys_id(struct net_device *dev,
+			    enum ethtool_phys_id_state state)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+	u8 led_state = 0;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
+
+	case ETHTOOL_ID_ON:
+		led_state = QED_LED_MODE_ON;
+		break;
+
+	case ETHTOOL_ID_OFF:
+		led_state = QED_LED_MODE_OFF;
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		led_state = QED_LED_MODE_RESTORE;
+		break;
+	}
+
+	edev->ops->common->set_led(edev->cdev, led_state);
+
+	return 0;
+}
+
 static const struct ethtool_ops qede_ethtool_ops = {
 	.get_settings = qede_get_settings,
 	.set_settings = qede_set_settings,
 	.get_drvinfo = qede_get_drvinfo,
 	.get_msglevel = qede_get_msglevel,
 	.set_msglevel = qede_set_msglevel,
+	.nway_reset = qede_nway_reset,
 	.get_link = qede_get_link,
+	.get_ringparam = qede_get_ringparam,
+	.set_ringparam = qede_set_ringparam,
+	.get_pauseparam = qede_get_pauseparam,
+	.set_pauseparam = qede_set_pauseparam,
 	.get_strings = qede_get_strings,
+	.set_phys_id = qede_set_phys_id,
 	.get_ethtool_stats = qede_get_ethtool_stats,
 	.get_sset_count = qede_get_sset_count,
 
+	.get_channels = qede_get_channels,
+	.set_channels = qede_set_channels,
 };
 
 void qede_set_ethtool_ops(struct net_device *dev)

drivers/net/ethernet/qlogic/qede/qede_main.c

@@ -1502,8 +1502,11 @@ static int qede_set_num_queues(struct qede_dev *edev)
 	u16 rss_num;
 
 	/* Setup queues according to possible resources*/
-	rss_num = netif_get_num_default_rss_queues() *
+	if (edev->req_rss)
-		  edev->dev_info.common.num_hwfns;
+		rss_num = edev->req_rss;
+	else
+		rss_num = netif_get_num_default_rss_queues() *
+			  edev->dev_info.common.num_hwfns;
 
 	rss_num = min_t(u16, QEDE_MAX_RSS_CNT(edev), rss_num);
 

include/linux/qed/qed_if.h

@@ -25,6 +25,12 @@
 #include <linux/qed/common_hsi.h>
 #include <linux/qed/qed_chain.h>
 
+enum qed_led_mode {
+	QED_LED_MODE_OFF,
+	QED_LED_MODE_ON,
+	QED_LED_MODE_RESTORE
+};
+
 #define DIRECT_REG_WR(reg_addr, val) writel((u32)val, \
 					    (void __iomem *)(reg_addr))
 
@@ -252,6 +258,17 @@ struct qed_common_ops {
 
 	void		(*chain_free)(struct qed_dev *cdev,
 				      struct qed_chain *p_chain);
+
+/**
+ * @brief set_led - Configure LED mode
+ *
+ * @param cdev
+ * @param mode - LED mode
+ *
+ * @return 0 on success, error otherwise.
+ */
+	int (*set_led)(struct qed_dev *cdev,
+		       enum qed_led_mode mode);
 };
 
 /**