Merge branch 'x86/cpu' into x86/x2apic

Documentation/DocBook/Makefile

@@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml
 C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
 $(obj)/procfs-guide.xml: $(C-procfs-example2)
 
+# List of programs to build
+##oops, this is a kernel module::hostprogs-y := procfs_example
+obj-m += procfs_example.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
 notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
 		   exit 1
 db2xtemplate = db2TYPE -o $(dir $@) $<

Documentation/DocBook/procfs_example.c

@@ -189,8 +189,6 @@ static int __init init_procfs_example(void)
 	return 0;
 
 no_symlink:
-	remove_proc_entry("tty", example_dir);
-no_tty:
 	remove_proc_entry("bar", example_dir);
 no_bar:
 	remove_proc_entry("foo", example_dir);
@@ -206,7 +204,6 @@ out:
 static void __exit cleanup_procfs_example(void)
 {
 	remove_proc_entry("jiffies_too", example_dir);
-	remove_proc_entry("tty", example_dir);
 	remove_proc_entry("bar", example_dir);
 	remove_proc_entry("foo", example_dir);
 	remove_proc_entry("jiffies", example_dir);
@@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example);
 
 MODULE_AUTHOR("Erik Mouw");
 MODULE_DESCRIPTION("procfs examples");
+MODULE_LICENSE("GPL");

Documentation/Makefile

@@ -0,0 +1,3 @@
+obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
+	filesystems/configfs/ ia64/ networking/ \
+	pcmcia/ spi/ video4linux/ vm/ watchdog/src/

Documentation/accounting/Makefile

@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := getdelays
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include

Documentation/accounting/getdelays.c

@@ -201,13 +201,19 @@ void print_delayacct(struct taskstats *t)
 	       "RECLAIM  %12s%15s\n"
 	       "      %15llu%15llu\n",
 	       "count", "real total", "virtual total", "delay total",
-	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
-	       t->cpu_delay_total,
+	       (unsigned long long)t->cpu_count,
+	       (unsigned long long)t->cpu_run_real_total,
+	       (unsigned long long)t->cpu_run_virtual_total,
+	       (unsigned long long)t->cpu_delay_total,
 	       "count", "delay total",
-	       t->blkio_count, t->blkio_delay_total,
-	       "count", "delay total", t->swapin_count, t->swapin_delay_total,
+	       (unsigned long long)t->blkio_count,
+	       (unsigned long long)t->blkio_delay_total,
 	       "count", "delay total",
-	       t->freepages_count, t->freepages_delay_total);
+	       (unsigned long long)t->swapin_count,
+	       (unsigned long long)t->swapin_delay_total,
+	       "count", "delay total",
+	       (unsigned long long)t->freepages_count,
+	       (unsigned long long)t->freepages_delay_total);
 }
 
 void task_context_switch_counts(struct taskstats *t)
@@ -215,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t)
 	printf("\n\nTask   %15s%15s\n"
 	       "       %15llu%15llu\n",
 	       "voluntary", "nonvoluntary",
-	       t->nvcsw, t->nivcsw);
+	       (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
 }
 
 void print_cgroupstats(struct cgroupstats *c)
 {
 	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
-		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
-		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+		"uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
+		(unsigned long long)c->nr_io_wait,
+		(unsigned long long)c->nr_running,
+		(unsigned long long)c->nr_stopped,
+		(unsigned long long)c->nr_uninterruptible);
 }
 
 

Documentation/auxdisplay/Makefile

@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := cfag12864b-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include

Documentation/connector/Makefile

@@ -0,0 +1,11 @@
+ifneq ($(CONFIG_CONNECTOR),)
+obj-m += cn_test.o
+endif
+
+# List of programs to build
+hostprogs-y := ucon
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include

Documentation/cpu-hotplug.txt

@@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't
 mark such hot-pluggable cpus as disabled entries, one could use this
 parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
 
-s390 uses the number of cpus it detects at IPL time to also the number of bits
-in cpu_possible_map. If it is desired to add additional cpus at a later time
-the number should be specified using this option or the possible_cpus option.
-
 possible_cpus=n		[s390 only] use this to set hotpluggable cpus.
 			This option sets possible_cpus bits in
 			cpu_possible_map. Thus keeping the numbers of bits set
 			constant even if the machine gets rebooted.
-			This option overrides additional_cpus.
 
 CPU maps and such
 -----------------

Documentation/devices.txt

@@ -2560,9 +2560,6 @@ Your cooperation is appreciated.
 		 96 = /dev/usb/hiddev0	1st USB HID device
 		    ...
 		111 = /dev/usb/hiddev15	16th USB HID device
-		112 = /dev/usb/auer0	1st auerswald ISDN device
-		    ...
-		127 = /dev/usb/auer15	16th auerswald ISDN device
 		128 = /dev/usb/brlvgr0	First Braille Voyager device
 		    ...
 		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device

Documentation/feature-removal-schedule.txt

@@ -19,15 +19,6 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:	old NCR53C9x driver
-When:	October 2007
-Why:	Replaced by the much better esp_scsi driver.  Actual low-level
-	driver can be ported over almost trivially.
-Who:	David Miller <davem@davemloft.net>
-	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	December 2008
 Files:	include/linux/video_decoder.h include/linux/videodev.h
@@ -205,19 +196,6 @@ Who:  Tejun Heo <htejun@gmail.com>
 
 ---------------------------
 
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why:  The arch/powerpc tree is the merged architecture for ppc32 and ppc64
-      platforms.  Currently there are efforts underway to port the remaining
-      arch/ppc platforms to the merged tree.  New submissions to the arch/ppc
-      tree have been frozen with the 2.6.22 kernel release and that tree will
-      remain in bug-fix only mode until its scheduled removal.  Platforms
-      that are not ported by June 2008 will be removed due to the lack of an
-      interested maintainer.
-Who:  linuxppc-dev@ozlabs.org
-
----------------------------
-
 What:	i386/x86_64 bzImage symlinks
 When:	April 2010
 

Documentation/filesystems/configfs/Makefile

@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_CONFIGFS_FS),)
+obj-m += configfs_example_explicit.o configfs_example_macros.o
+endif

Documentation/filesystems/quota.txt

@@ -3,14 +3,14 @@ Quota subsystem
 ===============
 
 Quota subsystem allows system administrator to set limits on used space and
-number of used inodes (inode is a filesystem structure which is associated
-with each file or directory) for users and/or groups. For both used space and
-number of used inodes there are actually two limits. The first one is called
-softlimit and the second one hardlimit.  An user can never exceed a hardlimit
-for any resource. User is allowed to exceed softlimit but only for limited
-period of time. This period is called "grace period" or "grace time". When
-grace time is over, user is not able to allocate more space/inodes until he
-frees enough of them to get below softlimit.
+number of used inodes (inode is a filesystem structure which is associated with
+each file or directory) for users and/or groups. For both used space and number
+of used inodes there are actually two limits. The first one is called softlimit
+and the second one hardlimit.  An user can never exceed a hardlimit for any
+resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed
+softlimit but only for limited period of time. This period is called "grace
+period" or "grace time". When grace time is over, user is not able to allocate
+more space/inodes until he frees enough of them to get below softlimit.
 
 Quota limits (and amount of grace time) are set independently for each
 filesystem.
@@ -53,6 +53,12 @@ in parentheses):
 		QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded
 		  longer than given grace period.
 		QUOTA_NL_BSOFTWARN - space (block) softlimit
+	  - four warnings are also defined for the event when user stops
+	    exceeding some limit:
+		QUOTA_NL_IHARDBELOW - inode hardlimit
+		QUOTA_NL_ISOFTBELOW - inode softlimit
+		QUOTA_NL_BHARDBELOW - space (block) hardlimit
+		QUOTA_NL_BSOFTBELOW - space (block) softlimit
         QUOTA_NL_A_DEV_MAJOR (u32)
 	  - major number of a device with the affected filesystem
         QUOTA_NL_A_DEV_MINOR (u32)

Documentation/ia64/Makefile

@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := aliasing-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/ioctl-number.txt

@@ -105,7 +105,6 @@ Code	Seq#	Include File		Comments
 'T'	all	linux/soundcard.h	conflict!
 'T'	all	asm-i386/ioctls.h	conflict!
 'U'	00-EF	linux/drivers/usb/usb.h
-'U'	F0-FF	drivers/usb/auerswald.c
 'V'	all	linux/vt.h
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!

Documentation/lguest/lguest.c

@@ -1447,21 +1447,6 @@ static void configure_device(int fd, const char *tapif, u32 ipaddr)
 		err(1, "Bringing interface %s up", tapif);
 }
 
-static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
-{
-	struct ifreq ifr;
-
-	memset(&ifr, 0, sizeof(ifr));
-	strcpy(ifr.ifr_name, tapif);
-
-	/* SIOC stands for Socket I/O Control.  G means Get (vs S for Set
-	 * above).  IF means Interface, and HWADDR is hardware address.
-	 * Simple! */
-	if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
-		err(1, "getting hw address for %s", tapif);
-	memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
-}
-
 static int get_tun_device(char tapif[IFNAMSIZ])
 {
 	struct ifreq ifr;
@@ -1531,11 +1516,8 @@ static void setup_tun_net(char *arg)
 	p = strchr(arg, ':');
 	if (p) {
 		str2mac(p+1, conf.mac);
+		add_feature(dev, VIRTIO_NET_F_MAC);
 		*p = '\0';
-	} else {
-		p = arg + strlen(arg);
-		/* None supplied; query the randomly assigned mac. */
-		get_mac(ipfd, tapif, conf.mac);
 	}
 
 	/* arg is now either an IP address or a bridge name */
@@ -1547,13 +1529,10 @@ static void setup_tun_net(char *arg)
 	/* Set up the tun device. */
 	configure_device(ipfd, tapif, ip);
 
-	/* Tell Guest what MAC address to use. */
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
 	/* Expect Guest to handle everything except UFO */
 	add_feature(dev, VIRTIO_NET_F_CSUM);
 	add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
-	add_feature(dev, VIRTIO_NET_F_MAC);
 	add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
 	add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
 	add_feature(dev, VIRTIO_NET_F_GUEST_ECN);

Documentation/networking/Makefile

@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := ifenslave
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/networking/ifenslave.c

@@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
 
 		}
 
-		ipaddr = ifr.ifr_addr.sa_data;
+		ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
 		v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
 			slave_ifname, ifra[i].desc,
 			ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);

Documentation/pcmcia/Makefile

@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := crc32hash
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include

Documentation/pcmcia/crc32hash.c

@@ -26,7 +26,7 @@ int main(int argc, char **argv) {
 		printf("no string passed as argument\n");
 		return -1;
 	}
-	result = crc32(argv[1], strlen(argv[1]));
+	result = crc32((unsigned char const *)argv[1], strlen(argv[1]));
 	printf("0x%x\n", result);
 	return 0;
 }

Documentation/spi/Makefile

@@ -0,0 +1,11 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := spidev_test spidev_fdx
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include

Documentation/usb/auerswald.txt

@@ -1,30 +0,0 @@
-		Auerswald USB kernel driver
-		===========================
-
-What is it? What can I do with it?
-==================================
-The auerswald USB kernel driver connects your linux 2.4.x
-system to the auerswald usb-enabled devices.
-
-There are two types of auerswald usb devices:
-a) small PBX systems (ISDN)
-b) COMfort system telephones (ISDN)
-
-The driver installation creates the devices
-/dev/usb/auer0..15. These devices carry a vendor-
-specific protocol. You may run all auerswald java
-software on it. The java software needs a native
-library "libAuerUsbJNINative.so" installed on
-your system. This library is available from
-auerswald and shipped as part of the java software.
-
-You may create the devices with:
-	mknod -m 666 /dev/usb/auer0 c 180 112
-	...
-	mknod -m 666 /dev/usb/auer15 c 180 127
-
-Future plans
-============
-- Connection to ISDN4LINUX (the hisax interface)
-
-The maintainer of this driver is wolfgang@iksw-muees.de

Documentation/usb/power-management.txt

@@ -436,7 +436,12 @@ post_reset; the USB core guarantees that this is true of internal
 suspend/resume events as well.
 
 If a driver wants to block all suspend/resume calls during some
-critical section, it can simply acquire udev->pm_mutex.
+critical section, it can simply acquire udev->pm_mutex. Note that
+calls to resume may be triggered indirectly. Block IO due to memory
+allocations can make the vm subsystem resume a device. Thus while
+holding this lock you must not allocate memory with GFP_KERNEL or
+GFP_NOFS.
+
 Alternatively, if the critical section might call some of the
 usb_autopm_* routines, the driver can avoid deadlock by doing:
 

Documentation/video4linux/Makefile

@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := v4lgrab
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/vm/Makefile

@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := slabinfo
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

Documentation/watchdog/src/Makefile

@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := watchdog-simple watchdog-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)

MAINTAINERS

@@ -2462,7 +2462,7 @@ L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
 S:	Maintained
 
-KERNEL NFSD
+KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 P:	J. Bruce Fields
 M:	bfields@fieldses.org
 P:	Neil Brown
@@ -2928,6 +2928,12 @@ M:	jirislaby@gmail.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
+P:     Felipe Balbi
+M:     felipe.balbi@nokia.com
+L:     linux-usb@vger.kernel.org
+S:     Maintained
+
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 P:	Andrew Gallatin
 M:	gallatin@myri.com
@@ -3076,9 +3082,10 @@ M:	horms@verge.net.au
 P:	Julian Anastasov
 M:	ja@ssi.bg
 L:	netdev@vger.kernel.org
+L:	lvs-devel@vger.kernel.org
 S:	Maintained
 
-NFS CLIENT
+NFS, SUNRPC, AND LOCKD CLIENTS
 P:	Trond Myklebust
 M:	Trond.Myklebust@netapp.com
 L:	linux-nfs@vger.kernel.org
@@ -4195,12 +4202,6 @@ M:	oliver@neukum.name
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 
-USB AUERSWALD DRIVER
-P:	Wolfgang Muees
-M:	wolfgang@iksw-muees.de
-L:      linux-usb@vger.kernel.org
-S:	Maintained
-
 USB BLOCK DRIVER (UB ub)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
@@ -4683,12 +4684,6 @@ L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
-ZF MACHZ WATCHDOG
-P:	Fernando Fuganti
-M:	fuganti@netbank.com.br
-W:	http://cvs.conectiva.com.br/drivers/ZFL-watchdog/
-S:	Maintained
-
 ZR36067 VIDEO FOR LINUX DRIVER
 P:	Ronald Bultje
 M:	rbultje@ronald.bitfreak.net

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
@@ -821,6 +821,9 @@ ifdef CONFIG_HEADERS_CHECK
 endif
 ifdef CONFIG_SAMPLES
 	$(Q)$(MAKE) $(build)=samples
+endif
+ifdef CONFIG_BUILD_DOCSRC
+	$(Q)$(MAKE) $(build)=Documentation
 endif
 	$(call vmlinux-modpost)
 	$(call if_changed_rule,vmlinux__)
@@ -1166,7 +1169,7 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \
 #
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
+clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
 
 PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):

arch/arm/mach-omap2/usb-tusb6010.c

@@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		printk(error, 6, status);
 		return -ENODEV;
 	}
-	data->multipoint = 1;
 	tusb_device.dev.platform_data = data;
 
 	/* REVISIT let the driver know what DMA channels work */

arch/avr32/Makefile

@@ -39,20 +39,6 @@ core-y					+= arch/avr32/mm/
 drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 libs-y					+= arch/avr32/lib/
 
-archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-
-include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-avr32
-	$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
-else
-	$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
-endif
-	@touch $@
-
-archprepare: include/asm-avr32/.arch
-
 CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
 
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec

arch/avr32/boards/atngw100/setup.c

@@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2];
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
 		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 10000000,
+		.max_speed_hz	= 8000000,
 		.chip_select	= 0,
 	},
 };

arch/avr32/boards/atstk1000/atstk1002.c

@@ -96,7 +96,7 @@ static struct mtd_partition *nand_part_info(int size, int *num_partitions)
 	return nand_partitions;
 }
 
-struct atmel_nand_data atstk1006_nand_data __initdata = {
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
 	.cle		= 21,
 	.ale		= 22,
 	.rdy_pin	= GPIO_PIN_PB(30),

arch/avr32/configs/atngw100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:59 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 16:00:47 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -78,10 +78,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -98,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -174,6 +183,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
@@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -931,17 +981,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

arch/avr32/configs/atstk1002_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:20 2008
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:02:27 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -77,10 +77,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -91,12 +97,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,6 +137,7 @@ CONFIG_BOARD_ATSTK1000=y
 CONFIG_BOARD_ATSTK1002=y
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -150,6 +158,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -168,6 +177,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -182,6 +192,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -213,10 +229,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -230,6 +242,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -284,6 +297,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -474,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -483,7 +498,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,21 +639,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -664,27 +692,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -703,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -754,6 +788,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -761,15 +798,7 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -783,37 +812,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -836,7 +839,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -855,21 +858,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -879,7 +885,9 @@ CONFIG_LEDS_CLASS=m
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -918,10 +926,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -941,18 +952,31 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
+CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1018,6 +1042,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1028,13 +1053,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1104,6 +1128,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1124,6 +1150,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1188,6 +1215,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1228,12 +1259,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

arch/avr32/configs/atstk1003_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:33:05 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:34:44 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -80,10 +80,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 CONFIG_BOARD_ATSTK1003=y
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -184,6 +194,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-CONFIG_UIO=m
-# CONFIG_UIO_SMX is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
@@ -1063,6 +1086,7 @@ CONFIG_CRC7=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y

arch/avr32/configs/atstk1004_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:34:57 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:38:56 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -69,10 +69,16 @@ CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 CONFIG_BOARD_ATSTK1004=y
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 # CONFIG_NMI_DEBUGGING is not set
@@ -147,6 +156,8 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -164,10 +175,6 @@ CONFIG_CMDLINE=""
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # I2C GPIO expanders:
 #
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -525,6 +536,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/avr32/mach-at32ap/Makefile

@@ -1,4 +1,5 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o

arch/avr32/mach-at32ap/at32ap700x.c

@@ -22,13 +22,13 @@
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
+#include <mach/hmatrix.h>
 #include <mach/portmux.h>
 #include <mach/sram.h>
 
 #include <video/atmel_lcdc.h>
 
 #include "clock.h"
-#include "hmatrix.h"
 #include "pio.h"
 #include "pm.h"
 
@@ -725,7 +725,7 @@ static struct clk pico_clk = {
  * HMATRIX
  * -------------------------------------------------------------------- */
 
-static struct clk hmatrix_clk = {
+struct clk at32_hmatrix_clk = {
 	.name		= "hmatrix_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
@@ -733,12 +733,6 @@ static struct clk hmatrix_clk = {
 	.index		= 2,
 	.users		= 1,
 };
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
 
 /*
  * Set bits in the HMATRIX Special Function Register (SFR) used by the
@@ -748,13 +742,7 @@ static struct clk hmatrix_clk = {
  */
 static inline void set_ebi_sfr_bits(u32 mask)
 {
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
 }
 
 /* --------------------------------------------------------------------
@@ -1779,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
 		ret = platform_device_add_resources(pdev,
@@ -1789,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
 		return -EINVAL;
@@ -1905,7 +1893,7 @@ at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
 				sizeof(struct atmel_nand_data)))
 		goto fail;
 
-	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
 	if (data->enable_pin)
 		at32_select_gpio(data->enable_pin,
 				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
@@ -2097,7 +2085,7 @@ struct clk *at32_clock_list[] = {
 	&pbb_clk,
 	&at32_pm_pclk,
 	&at32_intc0_pclk,
-	&hmatrix_clk,
+	&at32_hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
 	&sdramc_clk,

arch/avr32/mach-at32ap/clock.c

@@ -16,6 +16,8 @@
 #include <linux/device.h>
 #include <linux/string.h>
 
+#include <mach/chip.h>
+
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clk_lock);

arch/avr32/mach-at32ap/hmatrix.c

@@ -0,0 +1,88 @@
+/*
+ * High-Speed Bus Matrix helper functions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/chip.h>
+#include <mach/hmatrix.h>
+
+static inline void __hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	__raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+static inline u32 __hmatrix_read_reg(unsigned long offset)
+{
+	return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+/**
+ * hmatrix_write_reg - write HMATRIX configuration register
+ * @offset: register offset
+ * @value: value to be written to the register at @offset
+ */
+void hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	clk_enable(&at32_hmatrix_clk);
+	__hmatrix_write_reg(offset, value);
+	__hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_read_reg - read HMATRIX configuration register
+ * @offset: register offset
+ *
+ * Returns the value of the register at @offset.
+ */
+u32 hmatrix_read_reg(unsigned long offset)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+
+	return value;
+}
+
+/**
+ * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be set in the SFR
+ */
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value |= mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be cleared in the SFR
+ */
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value &= ~mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}

arch/avr32/mach-at32ap/hmatrix.h

@@ -1,182 +0,0 @@
-/*
- * Register definitions for High-Speed Bus Matrix
- */
-#ifndef __HMATRIX_H
-#define __HMATRIX_H
-
-/* HMATRIX register offsets */
-#define HMATRIX_MCFG0				0x0000
-#define HMATRIX_MCFG1				0x0004
-#define HMATRIX_MCFG2				0x0008
-#define HMATRIX_MCFG3				0x000c
-#define HMATRIX_MCFG4				0x0010
-#define HMATRIX_MCFG5				0x0014
-#define HMATRIX_MCFG6				0x0018
-#define HMATRIX_MCFG7				0x001c
-#define HMATRIX_MCFG8				0x0020
-#define HMATRIX_MCFG9				0x0024
-#define HMATRIX_MCFG10				0x0028
-#define HMATRIX_MCFG11				0x002c
-#define HMATRIX_MCFG12				0x0030
-#define HMATRIX_MCFG13				0x0034
-#define HMATRIX_MCFG14				0x0038
-#define HMATRIX_MCFG15				0x003c
-#define HMATRIX_SCFG0				0x0040
-#define HMATRIX_SCFG1				0x0044
-#define HMATRIX_SCFG2				0x0048
-#define HMATRIX_SCFG3				0x004c
-#define HMATRIX_SCFG4				0x0050
-#define HMATRIX_SCFG5				0x0054
-#define HMATRIX_SCFG6				0x0058
-#define HMATRIX_SCFG7				0x005c
-#define HMATRIX_SCFG8				0x0060
-#define HMATRIX_SCFG9				0x0064
-#define HMATRIX_SCFG10				0x0068
-#define HMATRIX_SCFG11				0x006c
-#define HMATRIX_SCFG12				0x0070
-#define HMATRIX_SCFG13				0x0074
-#define HMATRIX_SCFG14				0x0078
-#define HMATRIX_SCFG15				0x007c
-#define HMATRIX_PRAS0				0x0080
-#define HMATRIX_PRBS0				0x0084
-#define HMATRIX_PRAS1				0x0088
-#define HMATRIX_PRBS1				0x008c
-#define HMATRIX_PRAS2				0x0090
-#define HMATRIX_PRBS2				0x0094
-#define HMATRIX_PRAS3				0x0098
-#define HMATRIX_PRBS3				0x009c
-#define HMATRIX_PRAS4				0x00a0
-#define HMATRIX_PRBS4				0x00a4
-#define HMATRIX_PRAS5				0x00a8
-#define HMATRIX_PRBS5				0x00ac
-#define HMATRIX_PRAS6				0x00b0
-#define HMATRIX_PRBS6				0x00b4
-#define HMATRIX_PRAS7				0x00b8
-#define HMATRIX_PRBS7				0x00bc
-#define HMATRIX_PRAS8				0x00c0
-#define HMATRIX_PRBS8				0x00c4
-#define HMATRIX_PRAS9				0x00c8
-#define HMATRIX_PRBS9				0x00cc
-#define HMATRIX_PRAS10				0x00d0
-#define HMATRIX_PRBS10				0x00d4
-#define HMATRIX_PRAS11				0x00d8
-#define HMATRIX_PRBS11				0x00dc
-#define HMATRIX_PRAS12				0x00e0
-#define HMATRIX_PRBS12				0x00e4
-#define HMATRIX_PRAS13				0x00e8
-#define HMATRIX_PRBS13				0x00ec
-#define HMATRIX_PRAS14				0x00f0
-#define HMATRIX_PRBS14				0x00f4
-#define HMATRIX_PRAS15				0x00f8
-#define HMATRIX_PRBS15				0x00fc
-#define HMATRIX_MRCR				0x0100
-#define HMATRIX_SFR0				0x0110
-#define HMATRIX_SFR1				0x0114
-#define HMATRIX_SFR2				0x0118
-#define HMATRIX_SFR3				0x011c
-#define HMATRIX_SFR4				0x0120
-#define HMATRIX_SFR5				0x0124
-#define HMATRIX_SFR6				0x0128
-#define HMATRIX_SFR7				0x012c
-#define HMATRIX_SFR8				0x0130
-#define HMATRIX_SFR9				0x0134
-#define HMATRIX_SFR10				0x0138
-#define HMATRIX_SFR11				0x013c
-#define HMATRIX_SFR12				0x0140
-#define HMATRIX_SFR13				0x0144
-#define HMATRIX_SFR14				0x0148
-#define HMATRIX_SFR15				0x014c
-
-/* Bitfields in MCFGx */
-#define HMATRIX_ULBT_OFFSET			0
-#define HMATRIX_ULBT_SIZE			3
-
-/* Bitfields in SCFGx */
-#define HMATRIX_SLOT_CYCLE_OFFSET		0
-#define HMATRIX_SLOT_CYCLE_SIZE			8
-#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
-#define HMATRIX_DEFMSTR_TYPE_SIZE		2
-#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
-#define HMATRIX_FIXED_DEFMSTR_SIZE		4
-#define HMATRIX_ARBT_OFFSET			24
-#define HMATRIX_ARBT_SIZE			2
-
-/* Bitfields in PRASx */
-#define HMATRIX_M0PR_OFFSET			0
-#define HMATRIX_M0PR_SIZE			4
-#define HMATRIX_M1PR_OFFSET			4
-#define HMATRIX_M1PR_SIZE			4
-#define HMATRIX_M2PR_OFFSET			8
-#define HMATRIX_M2PR_SIZE			4
-#define HMATRIX_M3PR_OFFSET			12
-#define HMATRIX_M3PR_SIZE			4
-#define HMATRIX_M4PR_OFFSET			16
-#define HMATRIX_M4PR_SIZE			4
-#define HMATRIX_M5PR_OFFSET			20
-#define HMATRIX_M5PR_SIZE			4
-#define HMATRIX_M6PR_OFFSET			24
-#define HMATRIX_M6PR_SIZE			4
-#define HMATRIX_M7PR_OFFSET			28
-#define HMATRIX_M7PR_SIZE			4
-
-/* Bitfields in PRBSx */
-#define HMATRIX_M8PR_OFFSET			0
-#define HMATRIX_M8PR_SIZE			4
-#define HMATRIX_M9PR_OFFSET			4
-#define HMATRIX_M9PR_SIZE			4
-#define HMATRIX_M10PR_OFFSET			8
-#define HMATRIX_M10PR_SIZE			4
-#define HMATRIX_M11PR_OFFSET			12
-#define HMATRIX_M11PR_SIZE			4
-#define HMATRIX_M12PR_OFFSET			16
-#define HMATRIX_M12PR_SIZE			4
-#define HMATRIX_M13PR_OFFSET			20
-#define HMATRIX_M13PR_SIZE			4
-#define HMATRIX_M14PR_OFFSET			24
-#define HMATRIX_M14PR_SIZE			4
-#define HMATRIX_M15PR_OFFSET			28
-#define HMATRIX_M15PR_SIZE			4
-
-/* Bitfields in SFR4 */
-#define HMATRIX_CS1A_OFFSET			1
-#define HMATRIX_CS1A_SIZE			1
-#define HMATRIX_CS3A_OFFSET			3
-#define HMATRIX_CS3A_SIZE			1
-#define HMATRIX_CS4A_OFFSET			4
-#define HMATRIX_CS4A_SIZE			1
-#define HMATRIX_CS5A_OFFSET			5
-#define HMATRIX_CS5A_SIZE			1
-#define HMATRIX_DBPUC_OFFSET			8
-#define HMATRIX_DBPUC_SIZE			1
-
-/* Constants for ULBT */
-#define HMATRIX_ULBT_INFINITE			0
-#define HMATRIX_ULBT_SINGLE			1
-#define HMATRIX_ULBT_FOUR_BEAT			2
-#define HMATRIX_ULBT_EIGHT_BEAT			3
-#define HMATRIX_ULBT_SIXTEEN_BEAT		4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
-#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
-#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
-
-/* Constants for ARBT */
-#define HMATRIX_ARBT_ROUND_ROBIN		0
-#define HMATRIX_ARBT_FIXED_PRIORITY		1
-
-/* Bit manipulation macros */
-#define HMATRIX_BIT(name)					\
-	(1 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BF(name,value)					\
-	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
-	 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BFEXT(name,value)				\
-	(((value) >> HMATRIX_##name##_OFFSET)			\
-	 & ((1 << HMATRIX_##name##_SIZE) - 1))
-#define HMATRIX_BFINS(name,value,old)				\
-	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
-		    << HMATRIX_##name##_OFFSET))		\
-	 | HMATRIX_BF(name,value))
-
-#endif /* __HMATRIX_H */

arch/avr32/mach-at32ap/include/mach/at32ap700x.h

@@ -46,4 +46,41 @@
 #define DMAC_DMAREQ_2		9
 #define DMAC_DMAREQ_3		10
 
+/* HSB master IDs */
+#define HMATRIX_MASTER_CPU_DCACHE		0
+#define HMATRIX_MASTER_CPU_ICACHE		1
+#define HMATRIX_MASTER_PDC			2
+#define HMATRIX_MASTER_ISI			3
+#define HMATRIX_MASTER_USBA			4
+#define HMATRIX_MASTER_LCDC			5
+#define HMATRIX_MASTER_MACB0			6
+#define HMATRIX_MASTER_MACB1			7
+#define HMATRIX_MASTER_DMACA_M0			8
+#define HMATRIX_MASTER_DMACA_M1			9
+
+/* HSB slave IDs */
+#define HMATRIX_SLAVE_SRAM0			0
+#define HMATRIX_SLAVE_SRAM1			1
+#define HMATRIX_SLAVE_PBA			2
+#define HMATRIX_SLAVE_PBB			3
+#define HMATRIX_SLAVE_EBI			4
+#define HMATRIX_SLAVE_USBA			5
+#define HMATRIX_SLAVE_LCDC			6
+#define HMATRIX_SLAVE_DMACA			7
+
+/* Bits in HMATRIX SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE		(1 << 1)
+#define HMATRIX_EBI_NAND_ENABLE			(1 << 3)
+#define HMATRIX_EBI_CF0_ENABLE			(1 << 4)
+#define HMATRIX_EBI_CF1_ENABLE			(1 << 5)
+#define HMATRIX_EBI_PULLUP_DISABLE		(1 << 8)
+
+/*
+ * Base addresses of controllers that may be accessed early by
+ * platform code.
+ */
+#define PM_BASE		0xfff00000
+#define HMATRIX_BASE	0xfff00800
+#define SDRAMC_BASE	0xfff03800
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */

arch/avr32/mach-at32ap/include/mach/chip.h

@@ -0,0 +1,19 @@
+/*
+ * AVR32 chip-specific definitions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_H__
+#define __ASM_AVR32_ARCH_CHIP_H__
+
+#if defined(CONFIG_CPU_AT32AP700X)
+# include <mach/at32ap700x.h>
+#else
+# error Unknown chip type selected
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_H__ */

arch/avr32/mach-at32ap/include/mach/hmatrix.h

@@ -0,0 +1,55 @@
+/*
+ * High-Speed Bus Matrix configuration registers
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HMATRIX_H
+#define __HMATRIX_H
+
+extern struct clk at32_hmatrix_clk;
+
+void hmatrix_write_reg(unsigned long offset, u32 value);
+u32 hmatrix_read_reg(unsigned long offset);
+
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+
+/* Master Configuration register */
+#define HMATRIX_MCFG(m)			(0x0000 + 4 * (m))
+/* Undefined length burst limit */
+# define HMATRIX_MCFG_ULBT_INFINITE	0	/* Infinite length */
+# define HMATRIX_MCFG_ULBT_SINGLE	1	/* Single Access */
+# define HMATRIX_MCFG_ULBT_FOUR_BEAT	2	/* Four beat */
+# define HMATRIX_MCFG_ULBT_EIGHT_BEAT	3	/* Eight beat */
+# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT	4	/* Sixteen beat */
+
+/* Slave Configuration register */
+#define HMATRIX_SCFG(s)			(0x0040 + 4 * (s))
+# define HMATRIX_SCFG_SLOT_CYCLE(x)	((x) <<  0)	/* Max burst cycles */
+# define HMATRIX_SCFG_DEFMSTR_NONE	(  0 << 16)	/* No default master */
+# define HMATRIX_SCFG_DEFMSTR_LAST	(  1 << 16)	/* Last def master */
+# define HMATRIX_SCFG_DEFMSTR_FIXED	(  2 << 16)	/* Fixed def master */
+# define HMATRIX_SCFG_FIXED_DEFMSTR(m)	((m) << 18)	/* Fixed master ID */
+# define HMATRIX_SCFG_ARBT_ROUND_ROBIN	(  0 << 24)	/* RR arbitration */
+# define HMATRIX_SCFG_ARBT_FIXED_PRIO	(  1 << 24)	/* Fixed priority */
+
+/* Slave Priority register A (master 0..7) */
+#define HMATRIX_PRAS(s)			(0x0080 + 8 * (s))
+# define HMATRIX_PRAS_PRIO(m, p)	((p) << ((m) * 4))
+
+/* Slave Priority register A (master 8..15) */
+#define HMATRIX_PRBS(s)			(0x0084 + 8 * (s))
+# define HMATRIX_PRBS_PRIO(m, p)	((p) << (((m) - 8) * 4))
+
+/* Master Remap Control Register */
+#define HMATRIX_MRCR				0x0100
+# define HMATRIX_MRCR_REMAP(m)		(  1 << (m))	/* Remap master m */
+
+/* Special Function Register. Bit definitions are chip-specific */
+#define HMATRIX_SFR(s)			(0x0110 + 4 * (s))
+
+#endif /* __HMATRIX_H */

arch/avr32/mach-at32ap/pm.c

@@ -14,12 +14,10 @@
 #include <asm/cacheflush.h>
 #include <asm/sysreg.h>
 
+#include <mach/chip.h>
 #include <mach/pm.h>
 #include <mach/sram.h>
 
-/* FIXME: This is only valid for AP7000 */
-#define SDRAMC_BASE	0xfff03800
-
 #include "sdramc.h"
 
 #define SRAM_PAGE_FLAGS	(SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1)	\

arch/avr32/mach-at32ap/pm.h

@@ -4,14 +4,6 @@
 #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
 #define __ARCH_AVR32_MACH_AT32AP_PM_H__
 
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is only used on AVR32 AP CPUs with segmentation enabled,
- * it's safe to not use ioremap. Generic drivers should of course
- * never do this.
- */
-#define AT32_PM_BASE	0xfff00000
-
 /* PM register offsets */
 #define PM_MCCTRL				0x0000
 #define PM_CKSEL				0x0004
@@ -113,8 +105,8 @@
 
 /* Register access macros */
 #define pm_readl(reg)							\
-	__raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
 #define pm_writel(reg,value)						\
-	__raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
 
 #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */