Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] 20Kc: Disable use of WAIT instruction.
  [MIPS] Workaround for 4Kc machine check exception
  [MIPS] Malta: Fix off by one bug in interrupt handler.
  [MIPS] No ide_default_io_base() if PCI IDE was not found
  [MIPS] Add #include <linux/profile.h> to arch/mips/kernel/time.c
  [MIPS] N32 needs to use compat_sys_futimesat
  [MIPS] rtlx: Fix build error.
  [MIPS] rtlx: fix int vs. long bug.

arch/mips/kernel/cpu-probe.c

@@ -199,7 +199,14 @@ static inline void check_wait(void)
 		if ((c->processor_id & 0xff) <= 0x64)
 			break;
 
-		cpu_wait = r4k_wait;
+		/*
+		 * Another rev is incremeting c0_count at a reduced clock
+		 * rate while in WAIT mode.  So we basically have the choice
+		 * between using the cp0 timer as clocksource or avoiding
+		 * the WAIT instruction.  Until more details are known,
+		 * disable the use of WAIT for 20Kc entirely.
+		   cpu_wait = r4k_wait;
+		 */
 		break;
 	case CPU_RM9000:
 		if ((c->processor_id & 0x00ff) >= 0x40)

arch/mips/kernel/rtlx.c

@@ -56,8 +56,6 @@ static struct chan_waitqueues {
 	struct mutex mutex;
 } channel_wqs[RTLX_CHANNELS];
 
-static struct irqaction irq;
-static int irq_num;
 static struct vpe_notifications notify;
 static int sp_stopping = 0;
 
@@ -111,7 +109,7 @@ static void __used dump_rtlx(void)
 static int rtlx_init(struct rtlx_info *rtlxi)
 {
 	if (rtlxi->id != RTLX_ID) {
-		printk(KERN_ERR "no valid RTLX id at 0x%p 0x%x\n", rtlxi, rtlxi->id);
+		printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
 		return -ENOEXEC;
 	}
 

arch/mips/kernel/scall64-n32.S

@@ -375,7 +375,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_mkdirat
 	PTR	sys_mknodat
 	PTR	sys_fchownat
-	PTR	sys_futimesat			/* 6255 */
+	PTR	compat_sys_futimesat		/* 6255 */
 	PTR	sys_newfstatat
 	PTR	sys_unlinkat
 	PTR	sys_renameat

arch/mips/kernel/time.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/param.h>
+#include <linux/profile.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/smp.h>

arch/mips/mips-boards/malta/malta_int.c

@@ -256,7 +256,7 @@ asmlinkage void plat_irq_dispatch(void)
 
 	if (irq == MIPSCPU_INT_I8259A)
 		malta_hw0_irqdispatch();
-	else if (irq > 0)
+	else if (irq >= 0)
 		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
 	else
 		spurious_interrupt();

arch/mips/mm/tlbex.c

@@ -57,6 +57,21 @@ static __init int __maybe_unused r10000_llsc_war(void)
 	return R10000_LLSC_WAR;
 }
 
+/*
+ * Found by experiment: At least some revisions of the 4kc throw under
+ * some circumstances a machine check exception, triggered by invalid
+ * values in the index register.  Delaying the tlbp instruction until
+ * after the next branch,  plus adding an additional nop in front of
+ * tlbwi/tlbwr avoids the invalid index register values. Nobody knows
+ * why; it's not an issue caused by the core RTL.
+ *
+ */
+static __init int __attribute__((unused)) m4kc_tlbp_war(void)
+{
+	return (current_cpu_data.processor_id & 0xffff00) ==
+	       (PRID_COMP_MIPS | PRID_IMP_4KC);
+}
+
 /*
  * A little micro-assembler, intended for TLB refill handler
  * synthesizing. It is intentionally kept simple, does only support
@@ -894,6 +909,8 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_20KC:
 	case CPU_25KF:
 	case CPU_LOONGSON2:
+		if (m4kc_tlbp_war())
+			i_nop(p);
 		tlbw(p);
 		break;
 
@@ -1705,7 +1722,8 @@ build_r4000_tlbchange_handler_head(u32 **p, struct label **l,
 	l_smp_pgtable_change(l, *p);
 # endif
 	iPTE_LW(p, l, pte, ptr); /* get even pte */
-	build_tlb_probe_entry(p);
+	if (!m4kc_tlbp_war())
+		build_tlb_probe_entry(p);
 }
 
 static void __init
@@ -1747,6 +1765,8 @@ static void __init build_r4000_tlb_load_handler(void)
 
 	build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1);
 	build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
+	if (m4kc_tlbp_war())
+		build_tlb_probe_entry(&p);
 	build_make_valid(&p, &r, K0, K1);
 	build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
 
@@ -1781,6 +1801,8 @@ static void __init build_r4000_tlb_store_handler(void)
 
 	build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1);
 	build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
+	if (m4kc_tlbp_war())
+		build_tlb_probe_entry(&p);
 	build_make_write(&p, &r, K0, K1);
 	build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
 
@@ -1815,6 +1837,8 @@ static void __init build_r4000_tlb_modify_handler(void)
 
 	build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1);
 	build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
+	if (m4kc_tlbp_war())
+		build_tlb_probe_entry(&p);
 	/* Present and writable bits set, set accessed and dirty bits. */
 	build_make_write(&p, &r, K0, K1);
 	build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);

include/asm-mips/mach-generic/ide.h

@@ -29,6 +29,35 @@
 
 #define IDE_ARCH_OBSOLETE_DEFAULTS
 
+static __inline__ int ide_probe_legacy(void)
+{
+#ifdef CONFIG_PCI
+	struct pci_dev *dev;
+	/*
+	 * This can be called on the ide_setup() path, super-early in
+	 * boot.  But the down_read() will enable local interrupts,
+	 * which can cause some machines to crash.  So here we detect
+	 * and flag that situation and bail out early.
+	 */
+	if (no_pci_devices())
+		return 0;
+	dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL);
+	if (dev)
+		goto found;
+	dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
+	if (dev)
+		goto found;
+	return 0;
+found:
+	pci_dev_put(dev);
+	return 1;
+#elif defined(CONFIG_EISA) || defined(CONFIG_ISA)
+	return 1;
+#else
+	return 0;
+#endif
+}
+
 static __inline__ int ide_default_irq(unsigned long base)
 {
 	switch (base) {
@@ -45,6 +74,8 @@ static __inline__ int ide_default_irq(unsigned long base)
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
+	if (!ide_probe_legacy())
+		return 0;
 	/*
 	 *      If PCI is present then it is not safe to poke around
 	 *      the other legacy IDE ports. Only 0x1f0 and 0x170 are