serial: sh-sci: Fix NULL pointer dereference if HIGHMEM is enabled

This patch fixes an issue that this driver causes a NULL pointer
dereference in the following conditions:
 - CONFIG_HIGHMEM and CONFIG_SERIAL_SH_SCI_DMA are enabled
 - This driver runs on the sci_dma_rx_push()

This issue was caused by virt_to_page(buf) in the sci_request_dma()
because this driver didn't check if the "buf" was valid or not.  So,
this patch uses the "buf" from dma_alloc_coherent() as is, not page.

This patch also fixes a WARNING issue in sci_rx_dma_release():

    WARNING: CPU: 0 PID: 1328 at lib/dma-debug.c:1125 check_unmap+0x444/0x848()
    rcar-dmac e6700000.dma-controller: DMA-API: device driver frees DMA memory with different CPU address [device address=0x000000006dd89000] [size=64 bytes] [cpu alloc address=0x000000016189c000] [cpu free address=0x0000000080000000]

    WARNING: CPU: 1 PID: 1 at drivers/base/dma-mapping.c:334 dma_common_free_remap+0x48/0x6c()
    trying to free invalid coherent area:   (null)

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[geert] Rebased
[geert] Reworded
[geert] Dropped .rx_chunk, as it's always identical to .rx_buf[0]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Yoshihiro Shimoda 2015-08-21 20:02:54 +02:00 committed by Greg Kroah-Hartman
parent ba172c7045
commit 7b39d90184

View File

@ -110,6 +110,7 @@ struct sci_port {
dma_addr_t tx_dma_addr;
unsigned int tx_dma_len;
struct scatterlist sg_rx[2];
void *rx_buf[2];
size_t buf_len_rx;
struct sh_dmae_slave param_tx;
struct sh_dmae_slave param_rx;
@ -1301,14 +1302,13 @@ static void sci_dma_tx_complete(void *arg)
}
/* Locking: called with port lock held */
static int sci_dma_rx_push(struct sci_port *s, struct scatterlist *sg,
size_t count)
static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
{
struct uart_port *port = &s->port;
struct tty_port *tport = &port->state->port;
int copied;
copied = tty_insert_flip_string(tport, sg_virt(sg), count);
copied = tty_insert_flip_string(tport, buf, count);
if (copied < count) {
dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
count - copied);
@ -1347,7 +1347,7 @@ static void sci_dma_rx_complete(void *arg)
active = sci_dma_rx_find_active(s);
if (active >= 0)
count = sci_dma_rx_push(s, &s->sg_rx[active], s->buf_len_rx);
count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx);
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
@ -1370,8 +1370,8 @@ static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
spin_unlock_irqrestore(&port->lock, flags);
dmaengine_terminate_all(chan);
dma_free_coherent(chan->device->dev, s->buf_len_rx * 2,
sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
sg_dma_address(&s->sg_rx[0]));
dma_release_channel(chan);
if (enable_pio)
sci_start_rx(port);
@ -1464,7 +1464,7 @@ static void work_fn_rx(struct work_struct *work)
dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
s->active_rx);
count = sci_dma_rx_push(s, &s->sg_rx[new], read);
count = sci_dma_rx_push(s, s->rx_buf[new], read);
if (count)
tty_flip_buffer_push(&port->state->port);
@ -1756,9 +1756,9 @@ static void sci_request_dma(struct uart_port *port)
struct scatterlist *sg = &s->sg_rx[i];
sg_init_table(sg, 1);
sg_set_page(sg, virt_to_page(buf), s->buf_len_rx,
(uintptr_t)buf & ~PAGE_MASK);
s->rx_buf[i] = buf;
sg_dma_address(sg) = dma;
sg->length = s->buf_len_rx;
buf += s->buf_len_rx;
dma += s->buf_len_rx;