leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

usb: bdc: Remove the BDC PCI driver

Browse Source 
The BDC PCI driver was only used for design verification with
an PCI/FPGA board. The board no longer exists and is not in use
anywhere. All instances of this core now exist as a memory mapped
device on the platform bus.

NOTE: This only removes the PCI driver and does not remove the
platform driver.

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20210115213142.35003-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Al Cooper 2021-01-15 16:31:42 -05:00 committed by Greg Kroah-Hartman
parent 2e559638f7
commit 7766cafea0
3 changed files with 0 additions and 141 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/usb/gadget/udc/bdc/Kconfig
View File

@ -11,14 +11,3 @@ config USB_BDC_UDC
Say "y" here to link the driver statically, or "m" to build a dynamically
linked module called "bdc".
if USB_BDC_UDC
comment "Platform Support"
config USB_BDC_PCI
tristate "BDC support for PCIe based platforms"
depends on USB_PCI
default USB_BDC_UDC
help
Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform.
endif

2
drivers/usb/gadget/udc/bdc/Makefile
View File

@ -5,5 +5,3 @@ bdc-y := bdc_core.o bdc_cmd.o bdc_ep.o bdc_udc.o
ifneq ($(CONFIG_USB_GADGET_VERBOSE),)
bdc-y += bdc_dbg.o
endif
obj-$(CONFIG_USB_BDC_PCI) += bdc_pci.o

128
drivers/usb/gadget/udc/bdc/bdc_pci.c
View File

@ -1,128 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* bdc_pci.c - BRCM BDC USB3.0 device controller PCI interface file.
*
* Copyright (C) 2014 Broadcom Corporation
*
* Author: Ashwini Pahuja
*
* Based on drivers under drivers/usb/
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/platform_device.h>
#include "bdc.h"
#define BDC_PCI_PID 0x1570
struct bdc_pci {
struct device *dev;
struct platform_device *bdc;
};
static int bdc_setup_msi(struct pci_dev *pci)
{
int ret;
ret = pci_enable_msi(pci);
if (ret) {
pr_err("failed to allocate MSI entry\n");
return ret;
}
return ret;
}
static int bdc_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
{
struct resource res[2];
struct platform_device *bdc;
struct bdc_pci *glue;
int ret = -ENOMEM;
glue = devm_kzalloc(&pci->dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
return -ENOMEM;
glue->dev = &pci->dev;
ret = pci_enable_device(pci);
if (ret) {
dev_err(&pci->dev, "failed to enable pci device\n");
return -ENODEV;
}
pci_set_master(pci);
bdc = platform_device_alloc(BRCM_BDC_NAME, PLATFORM_DEVID_AUTO);
if (!bdc)
return -ENOMEM;
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
bdc_setup_msi(pci);
res[0].start = pci_resource_start(pci, 0);
res[0].end = pci_resource_end(pci, 0);
res[0].name = BRCM_BDC_NAME;
res[0].flags = IORESOURCE_MEM;
res[1].start = pci->irq;
res[1].name = BRCM_BDC_NAME;
res[1].flags = IORESOURCE_IRQ;
ret = platform_device_add_resources(bdc, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pci->dev,
"couldn't add resources to bdc device\n");
platform_device_put(bdc);
return ret;
}
pci_set_drvdata(pci, glue);
dma_set_coherent_mask(&bdc->dev, pci->dev.coherent_dma_mask);
bdc->dev.dma_mask = pci->dev.dma_mask;
bdc->dev.dma_parms = pci->dev.dma_parms;
bdc->dev.parent = &pci->dev;
glue->bdc = bdc;
ret = platform_device_add(bdc);
if (ret) {
dev_err(&pci->dev, "failed to register bdc device\n");
platform_device_put(bdc);
return ret;
}
return 0;
}
static void bdc_pci_remove(struct pci_dev *pci)
{
struct bdc_pci *glue = pci_get_drvdata(pci);
platform_device_unregister(glue->bdc);
pci_disable_msi(pci);
}
static struct pci_device_id bdc_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, BDC_PCI_PID), },
{} /* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, bdc_pci_id_table);
static struct pci_driver bdc_pci_driver = {
.name = "bdc-pci",
.id_table = bdc_pci_id_table,
.probe = bdc_pci_probe,
.remove = bdc_pci_remove,
};
MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("BRCM BDC USB3 PCI Glue layer");
module_pci_driver(bdc_pci_driver);