forked from Minki/linux
Linux 4.15-rc3
-----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJaLeXTAAoJEHm+PkMAQRiGA9EH/36KP3vBbsJ6gvaQP8i3d0eS VH0MWr7GajRcr82f5x1RnDE2hPeUj/T38Gealnsaz3YZMbxjMulc09UiwUHpeTFu h9Spp9dgJPAesOzwZ0AWQzqUA7eckiid6XOyoWfQielbK02uI48IeJJPO9Rf6Q3r AlxN8ufMMqs3edIRw3U64GEyH77Vn6eUrk4xX0SdYlL/XFXIrV2ud/k3QyIOh9L/ z87HgTc2oY4z104YcAJjCaOp38hAd6SLn3UPMg0A3Ao4/1nZKqXhpqnXkNTWc058 MJeYNs+wXWiglF7jzYTYXwdV1kDr6pYYmHdaSOZ7AMS2mmplklX1uOqSG3DhYCY= =v+z2 -----END PGP SIGNATURE----- Merge tag 'v4.15-rc3' into perf/core, to refresh the tree Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar
commit
76523de619
@ -15,7 +15,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
ccn@0x2000000000 {
|
||||
ccn@2000000000 {
|
||||
compatible = "arm,ccn-504";
|
||||
reg = <0x20 0x00000000 0 0x1000000>;
|
||||
interrupts = <0 181 4>;
|
||||
|
||||
@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
|
||||
interrupts = <GIC_SPI request_number interrupt_level>
|
||||
|
||||
Example:
|
||||
device_x@0x4a023000 {
|
||||
device_x@4a023000 {
|
||||
/* Crossbar 8 used */
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
...
|
||||
|
||||
@ -8,7 +8,7 @@ Required properties:
|
||||
- interrupts : Should contain MC General interrupt.
|
||||
|
||||
Example:
|
||||
memory-controller@0x7000f000 {
|
||||
memory-controller@7000f000 {
|
||||
compatible = "nvidia,tegra20-mc";
|
||||
reg = <0x7000f000 0x024
|
||||
0x7000f03c 0x3c4>;
|
||||
|
||||
@ -17,7 +17,7 @@ Optional properties:
|
||||
- clock-output-names : From common clock binding.
|
||||
|
||||
Example:
|
||||
clock@0xff000000 {
|
||||
clock@ff000000 {
|
||||
compatible = "adi,axi-clkgen";
|
||||
#clock-cells = <0>;
|
||||
reg = <0xff000000 0x1000>;
|
||||
|
||||
@ -23,7 +23,7 @@ Example:
|
||||
clocks = <&clk_osc>;
|
||||
};
|
||||
|
||||
aux: aux@0x7e215004 {
|
||||
aux: aux@7e215004 {
|
||||
compatible = "brcm,bcm2835-aux";
|
||||
#clock-cells = <1>;
|
||||
reg = <0x7e215000 0x8>;
|
||||
|
||||
@ -24,7 +24,7 @@ tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10030000 {
|
||||
clock: clock-controller@10030000 {
|
||||
compatible = "samsung,exynos4210-clock";
|
||||
reg = <0x10030000 0x20000>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
@ -22,7 +22,7 @@ tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5250-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5410-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
@ -23,7 +23,7 @@ tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5420-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
@ -21,7 +21,7 @@ tree sources.
|
||||
|
||||
Example: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
clock: clock-controller@10010000 {
|
||||
compatible = "samsung,exynos5440-clock";
|
||||
reg = <0x160000 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
@ -14,7 +14,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
pllctrl: pll-controller@0x02310000 {
|
||||
pllctrl: pll-controller@02310000 {
|
||||
compatible = "ti,keystone-pllctrl", "syscon";
|
||||
reg = <0x02310000 0x200>;
|
||||
};
|
||||
|
||||
@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
|
||||
for the full list of zx296702 clock IDs.
|
||||
|
||||
|
||||
topclk: topcrm@0x09800000 {
|
||||
topclk: topcrm@09800000 {
|
||||
compatible = "zte,zx296702-topcrm-clk";
|
||||
reg = <0x09800000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
uart0: serial@0x09405000 {
|
||||
uart0: serial@09405000 {
|
||||
compatible = "zte,zx296702-uart";
|
||||
reg = <0x09405000 0x1000>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -456,7 +456,7 @@ System ON/OFF key driver
|
||||
Definition: this is phandle to the register map node.
|
||||
|
||||
EXAMPLE:
|
||||
snvs-pwrkey@0x020cc000 {
|
||||
snvs-pwrkey@020cc000 {
|
||||
compatible = "fsl,sec-v4.0-pwrkey";
|
||||
regmap = <&snvs>;
|
||||
interrupts = <0 4 0x4>
|
||||
@ -545,7 +545,7 @@ FULL EXAMPLE
|
||||
interrupts = <93 2>;
|
||||
};
|
||||
|
||||
snvs-pwrkey@0x020cc000 {
|
||||
snvs-pwrkey@020cc000 {
|
||||
compatible = "fsl,sec-v4.0-pwrkey";
|
||||
regmap = <&sec_mon>;
|
||||
interrupts = <0 4 0x4>;
|
||||
|
||||
@ -9,7 +9,7 @@ Required properties:
|
||||
- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
|
||||
|
||||
Example:
|
||||
dfi: dfi@0xff630000 {
|
||||
dfi: dfi@ff630000 {
|
||||
compatible = "rockchip,rk3399-dfi";
|
||||
reg = <0x00 0xff630000 0x00 0x4000>;
|
||||
rockchip,pmu = <&pmugrf>;
|
||||
|
||||
@ -27,7 +27,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
fb0: fb@0x00500000 {
|
||||
fb0: fb@00500000 {
|
||||
compatible = "atmel,at91sam9g45-lcdc";
|
||||
reg = <0x00500000 0x1000>;
|
||||
interrupts = <23 3 0>;
|
||||
@ -41,7 +41,7 @@ Example:
|
||||
|
||||
Example for fixed framebuffer memory:
|
||||
|
||||
fb0: fb@0x00500000 {
|
||||
fb0: fb@00500000 {
|
||||
compatible = "atmel,at91sam9263-lcdc";
|
||||
reg = <0x00700000 0x1000 0x70000000 0x200000>;
|
||||
[...]
|
||||
|
||||
@ -73,7 +73,7 @@ Hypervisor OS configuration:
|
||||
max-read-transactions = <31>;
|
||||
channel-reset-timeout-cycles = <0x500>;
|
||||
|
||||
hidma_24: dma-controller@0x5c050000 {
|
||||
hidma_24: dma-controller@5c050000 {
|
||||
compatible = "qcom,hidma-1.0";
|
||||
reg = <0 0x5c050000 0x0 0x1000>,
|
||||
<0 0x5c0b0000 0x0 0x1000>;
|
||||
@ -85,7 +85,7 @@ Hypervisor OS configuration:
|
||||
|
||||
Guest OS configuration:
|
||||
|
||||
hidma_24: dma-controller@0x5c050000 {
|
||||
hidma_24: dma-controller@5c050000 {
|
||||
compatible = "qcom,hidma-1.0";
|
||||
reg = <0 0x5c050000 0x0 0x1000>,
|
||||
<0 0x5c0b0000 0x0 0x1000>;
|
||||
|
||||
@ -13,7 +13,7 @@ Required properties:
|
||||
Example:
|
||||
|
||||
Controller:
|
||||
dma: dma-controller@0x09c00000{
|
||||
dma: dma-controller@09c00000{
|
||||
compatible = "zte,zx296702-dma";
|
||||
reg = <0x09c00000 0x1000>;
|
||||
clocks = <&topclk ZX296702_DMA_ACLK>;
|
||||
|
||||
@ -1,7 +1,12 @@
|
||||
EEPROMs (SPI) compatible with Atmel at25.
|
||||
|
||||
Required properties:
|
||||
- compatible : "atmel,at25".
|
||||
- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
|
||||
Example "<vendor>,<type>" values:
|
||||
"microchip,25lc040"
|
||||
"st,m95m02"
|
||||
"st,m95256"
|
||||
|
||||
- reg : chip select number
|
||||
- spi-max-frequency : max spi frequency to use
|
||||
- pagesize : size of the eeprom page
|
||||
@ -13,7 +18,7 @@ Optional properties:
|
||||
- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
|
||||
- read-only : this parameter-less property disables writes to the eeprom
|
||||
|
||||
Obsolete legacy properties are can be used in place of "size", "pagesize",
|
||||
Obsolete legacy properties can be used in place of "size", "pagesize",
|
||||
"address-width", and "read-only":
|
||||
- at25,byte-len : total eeprom size in bytes
|
||||
- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
|
||||
@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize",
|
||||
Additional compatible properties are also allowed.
|
||||
|
||||
Example:
|
||||
at25@0 {
|
||||
compatible = "atmel,at25", "st,m95256";
|
||||
eeprom@0 {
|
||||
compatible = "st,m95256", "atmel,at25";
|
||||
reg = <0>
|
||||
spi-max-frequency = <5000000>;
|
||||
spi-cpha;
|
||||
|
||||
@ -30,7 +30,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
gpio_altr: gpio@0xff200000 {
|
||||
gpio_altr: gpio@ff200000 {
|
||||
compatible = "altr,pio-1.0";
|
||||
reg = <0xff200000 0x10>;
|
||||
interrupts = <0 45 4>;
|
||||
|
||||
@ -18,7 +18,7 @@ Optional properties:
|
||||
Example
|
||||
|
||||
/ {
|
||||
i2c4: i2c4@0x10054000 {
|
||||
i2c4: i2c4@10054000 {
|
||||
compatible = "ingenic,jz4780-i2c";
|
||||
reg = <0x10054000 0x1000>;
|
||||
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
hp03@0x77 {
|
||||
hp03@77 {
|
||||
compatible = "hoperf,hp03";
|
||||
reg = <0x77>;
|
||||
xclr-gpio = <&portc 0 0x0>;
|
||||
|
||||
@ -15,7 +15,7 @@ Optional properties:
|
||||
Example:
|
||||
|
||||
i2c@80110000 {
|
||||
bu21013_tp@0x5c {
|
||||
bu21013_tp@5c {
|
||||
compatible = "rohm,bu21013_tp";
|
||||
reg = <0x5c>;
|
||||
touch-gpio = <&gpio2 20 0x4>;
|
||||
|
||||
@ -155,7 +155,7 @@ Example:
|
||||
<0x0 0xe112f000 0 0x02000>,
|
||||
<0x0 0xe1140000 0 0x10000>,
|
||||
<0x0 0xe1160000 0 0x10000>;
|
||||
v2m0: v2m@0x8000 {
|
||||
v2m0: v2m@8000 {
|
||||
compatible = "arm,gic-v2m-frame";
|
||||
msi-controller;
|
||||
reg = <0x0 0x80000 0 0x1000>;
|
||||
@ -163,7 +163,7 @@ Example:
|
||||
|
||||
....
|
||||
|
||||
v2mN: v2m@0x9000 {
|
||||
v2mN: v2m@9000 {
|
||||
compatible = "arm,gic-v2m-frame";
|
||||
msi-controller;
|
||||
reg = <0x0 0x90000 0 0x1000>;
|
||||
|
||||
@ -71,7 +71,7 @@ Example 2:
|
||||
* An interrupt generating device that is wired to a Meta external
|
||||
* trigger block.
|
||||
*/
|
||||
uart1: uart@0x02004c00 {
|
||||
uart1: uart@02004c00 {
|
||||
// Interrupt source '5' that is level-sensitive.
|
||||
// Note that there are only two cells as specified in the
|
||||
// interrupt parent's '#interrupt-cells' property.
|
||||
|
||||
@ -51,7 +51,7 @@ Example 1:
|
||||
/*
|
||||
* TZ1090 PDC block
|
||||
*/
|
||||
pdc: pdc@0x02006000 {
|
||||
pdc: pdc@02006000 {
|
||||
// This is an interrupt controller node.
|
||||
interrupt-controller;
|
||||
|
||||
|
||||
@ -39,7 +39,7 @@ Example:
|
||||
|
||||
The following is an example from the SPEAr320 SoC dtsi file.
|
||||
|
||||
shirq: interrupt-controller@0xb3000000 {
|
||||
shirq: interrupt-controller@b3000000 {
|
||||
compatible = "st,spear320-shirq";
|
||||
reg = <0xb3000000 0x1000>;
|
||||
interrupts = <28 29 30 1>;
|
||||
|
||||
@ -14,7 +14,7 @@ Optional properties:
|
||||
depends on the interrupt controller parent.
|
||||
|
||||
Example:
|
||||
mbox_tx: mailbox@0x100 {
|
||||
mbox_tx: mailbox@100 {
|
||||
compatible = "altr,mailbox-1.0";
|
||||
reg = <0x100 0x8>;
|
||||
interrupt-parent = < &gic_0 >;
|
||||
@ -22,7 +22,7 @@ Example:
|
||||
#mbox-cells = <1>;
|
||||
};
|
||||
|
||||
mbox_rx: mailbox@0x200 {
|
||||
mbox_rx: mailbox@200 {
|
||||
compatible = "altr,mailbox-1.0";
|
||||
reg = <0x200 0x8>;
|
||||
interrupt-parent = < &gic_0 >;
|
||||
@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be
|
||||
used to give a name to the communication channel to be used by the client user.
|
||||
|
||||
Example:
|
||||
mclient0: mclient0@0x400 {
|
||||
mclient0: mclient0@400 {
|
||||
compatible = "client-1.0";
|
||||
reg = <0x400 0x10>;
|
||||
mbox-names = "mbox-tx", "mbox-rx";
|
||||
|
||||
@ -15,7 +15,7 @@ Optional properties:
|
||||
- brcm,use-bcm-hdr: present if a BCM header precedes each frame.
|
||||
|
||||
Example:
|
||||
pdc0: iproc-pdc0@0x612c0000 {
|
||||
pdc0: iproc-pdc0@612c0000 {
|
||||
compatible = "brcm,iproc-pdc-mbox";
|
||||
reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */
|
||||
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -17,7 +17,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
gsc_0: gsc@0x13e00000 {
|
||||
gsc_0: gsc@13e00000 {
|
||||
compatible = "samsung,exynos5250-gsc";
|
||||
reg = <0x13e00000 0x1000>;
|
||||
interrupts = <0 85 0>;
|
||||
|
||||
@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 {
|
||||
"vdec_bus_clk_src";
|
||||
};
|
||||
|
||||
vcodec_enc: vcodec@0x18002000 {
|
||||
vcodec_enc: vcodec@18002000 {
|
||||
compatible = "mediatek,mt8173-vcodec-enc";
|
||||
reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
|
||||
<0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
|
||||
|
||||
@ -44,7 +44,7 @@ Device node example
|
||||
vin0 = &vin0;
|
||||
};
|
||||
|
||||
vin0: vin@0xe6ef0000 {
|
||||
vin0: vin@e6ef0000 {
|
||||
compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
|
||||
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
|
||||
reg = <0 0xe6ef0000 0 0x1000>;
|
||||
|
||||
@ -138,7 +138,7 @@ Example:
|
||||
};
|
||||
|
||||
/* MIPI CSI-2 bus IF sensor */
|
||||
s5c73m3: sensor@0x1a {
|
||||
s5c73m3: sensor@1a {
|
||||
compatible = "samsung,s5c73m3";
|
||||
reg = <0x1a>;
|
||||
vddio-supply = <...>;
|
||||
|
||||
@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
|
||||
|
||||
Example:
|
||||
|
||||
ceu0: ceu@0xfe910000 {
|
||||
ceu0: ceu@fe910000 {
|
||||
compatible = "renesas,sh-mobile-ceu";
|
||||
reg = <0xfe910000 0xa0>;
|
||||
interrupt-parent = <&intcs>;
|
||||
|
||||
@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
|
||||
'port' node which may indicate that at any time only one of the following data
|
||||
pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
||||
|
||||
ceu0: ceu@0xfe910000 {
|
||||
ceu0: ceu@fe910000 {
|
||||
compatible = "renesas,sh-mobile-ceu";
|
||||
reg = <0xfe910000 0xa0>;
|
||||
interrupts = <0x880>;
|
||||
@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@0xfff20000 {
|
||||
i2c0: i2c@fff20000 {
|
||||
...
|
||||
ov772x_1: camera@0x21 {
|
||||
ov772x_1: camera@21 {
|
||||
compatible = "ovti,ov772x";
|
||||
reg = <0x21>;
|
||||
vddio-supply = <®ulator1>;
|
||||
@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
||||
};
|
||||
};
|
||||
|
||||
imx074: camera@0x1a {
|
||||
imx074: camera@1a {
|
||||
compatible = "sony,imx074";
|
||||
reg = <0x1a>;
|
||||
vddio-supply = <®ulator1>;
|
||||
@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
|
||||
};
|
||||
};
|
||||
|
||||
csi2: csi2@0xffc90000 {
|
||||
csi2: csi2@ffc90000 {
|
||||
compatible = "renesas,sh-mobile-csi2";
|
||||
reg = <0xffc90000 0x1000>;
|
||||
interrupts = <0x17a0>;
|
||||
|
||||
@ -46,7 +46,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
emif1: emif@0x4c000000 {
|
||||
emif1: emif@4c000000 {
|
||||
compatible = "ti,emif-4d";
|
||||
ti,hwmods = "emif2";
|
||||
phy-type = <1>;
|
||||
|
||||
@ -13,7 +13,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
devctrl: device-state-control@0x02620000 {
|
||||
devctrl: device-state-control@02620000 {
|
||||
compatible = "ti,keystone-devctrl", "syscon";
|
||||
reg = <0x02620000 0x1000>;
|
||||
};
|
||||
|
||||
@ -9,7 +9,7 @@ Required properties:
|
||||
- reg : Location and size of bounce buffer
|
||||
|
||||
Example:
|
||||
smc@0x3404c000 {
|
||||
smc@3404c000 {
|
||||
compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
|
||||
reg = <0x3404c000 0x400>; //1 KiB in SRAM
|
||||
};
|
||||
|
||||
@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties.
|
||||
|
||||
Example:
|
||||
|
||||
sdio2: sdio@0x3f1a0000 {
|
||||
sdio2: sdio@3f1a0000 {
|
||||
compatible = "brcm,kona-sdhci";
|
||||
reg = <0x3f1a0000 0x10000>;
|
||||
clocks = <&sdio3_clk>;
|
||||
|
||||
@ -24,7 +24,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
sdhci0: sdhci@0x18041000 {
|
||||
sdhci0: sdhci@18041000 {
|
||||
compatible = "brcm,sdhci-iproc-cygnus";
|
||||
reg = <0x18041000 0x100>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -55,7 +55,7 @@ Examples:
|
||||
|
||||
[hwmod populated DMA resources]
|
||||
|
||||
mmc1: mmc@0x4809c000 {
|
||||
mmc1: mmc@4809c000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x4809c000 0x400>;
|
||||
ti,hwmods = "mmc1";
|
||||
@ -67,7 +67,7 @@ Examples:
|
||||
|
||||
[generic DMA request binding]
|
||||
|
||||
mmc1: mmc@0x4809c000 {
|
||||
mmc1: mmc@4809c000 {
|
||||
compatible = "ti,omap4-hsmmc";
|
||||
reg = <0x4809c000 0x400>;
|
||||
ti,hwmods = "mmc1";
|
||||
|
||||
@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 {
|
||||
label = "bootloader-nor";
|
||||
reg = <0 0x40000>;
|
||||
};
|
||||
partition@0x40000 {
|
||||
partition@40000 {
|
||||
label = "params-nor";
|
||||
reg = <0x40000 0x40000>;
|
||||
};
|
||||
partition@0x80000 {
|
||||
partition@80000 {
|
||||
label = "kernel-nor";
|
||||
reg = <0x80000 0x200000>;
|
||||
};
|
||||
partition@0x280000 {
|
||||
partition@280000 {
|
||||
label = "filesystem-nor";
|
||||
reg = <0x240000 0x7d80000>;
|
||||
};
|
||||
|
||||
@ -131,7 +131,7 @@ Example:
|
||||
read-only;
|
||||
reg = <0x00000000 0x00400000>;
|
||||
};
|
||||
android@0x00400000 {
|
||||
android@00400000 {
|
||||
label = "android";
|
||||
reg = <0x00400000 0x12c00000>;
|
||||
};
|
||||
|
||||
@ -52,7 +52,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
|
||||
tse_sub_0_eth_tse_0: ethernet@1,00000000 {
|
||||
compatible = "altr,tse-msgdma-1.0";
|
||||
reg = <0x00000001 0x00000000 0x00000400>,
|
||||
<0x00000001 0x00000460 0x00000020>,
|
||||
@ -90,7 +90,7 @@ Example:
|
||||
};
|
||||
};
|
||||
|
||||
tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
|
||||
tse_sub_1_eth_tse_0: ethernet@1,00001000 {
|
||||
compatible = "altr,tse-msgdma-1.0";
|
||||
reg = <0x00000001 0x00001000 0x00000400>,
|
||||
<0x00000001 0x00001460 0x00000020>,
|
||||
|
||||
@ -18,7 +18,7 @@ Example :
|
||||
This example shows these optional properties, plus other properties
|
||||
required for the TI Davinci MDIO driver.
|
||||
|
||||
davinci_mdio: ethernet@0x5c030000 {
|
||||
davinci_mdio: ethernet@5c030000 {
|
||||
compatible = "ti,davinci_mdio";
|
||||
reg = <0x5c030000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
|
||||
@ -28,7 +28,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
gmii_to_sgmii_converter: phy@0x100000240 {
|
||||
gmii_to_sgmii_converter: phy@100000240 {
|
||||
compatible = "altr,gmii-to-sgmii-2.0";
|
||||
reg = <0x00000001 0x00000240 0x00000008>,
|
||||
<0x00000001 0x00000200 0x00000040>;
|
||||
|
||||
@ -36,7 +36,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
cpu@0x0 {
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "altr,nios2-1.0";
|
||||
reg = <0>;
|
||||
|
||||
@ -25,7 +25,7 @@ Optional properties:
|
||||
- bus-range: PCI bus numbers covered
|
||||
|
||||
Example
|
||||
pcie_0: pcie@0xc00000000 {
|
||||
pcie_0: pcie@c00000000 {
|
||||
compatible = "altr,pcie-root-port-1.0";
|
||||
reg = <0xc0000000 0x20000000>,
|
||||
<0xff220000 0x00004000>;
|
||||
|
||||
@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie:
|
||||
|
||||
Example:
|
||||
|
||||
pcie@0x01000000 {
|
||||
pcie@01000000 {
|
||||
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
|
||||
reg = <0x01ffc000 0x04000>,
|
||||
<0x01f00000 0x80000>;
|
||||
|
||||
@ -21,7 +21,7 @@ Optional properties:
|
||||
- dma-coherent: Present if DMA operations are coherent.
|
||||
|
||||
Hip05 Example (note that Hip06 is the same except compatible):
|
||||
pcie@0xb0080000 {
|
||||
pcie@b0080000 {
|
||||
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
|
||||
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
|
||||
reg-names = "rc_dbi", "config";
|
||||
|
||||
@ -45,7 +45,7 @@ Optional properties:
|
||||
- usb3_vbus-supply : regulator phandle for controller usb3 vbus
|
||||
|
||||
Example:
|
||||
usbphy: phy@0x01c13400 {
|
||||
usbphy: phy@01c13400 {
|
||||
#phy-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-usb-phy";
|
||||
/* phy base regs, phy1 pmu reg, phy2 pmu reg */
|
||||
|
||||
@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
||||
|
||||
For example:
|
||||
|
||||
pinmux: pinmux@0x0301d0c8 {
|
||||
pinmux: pinmux@0301d0c8 {
|
||||
compatible = "brcm,cygnus-pinmux";
|
||||
reg = <0x0301d0c8 0x1b0>;
|
||||
|
||||
|
||||
@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following:
|
||||
|
||||
For a specific board, if it wants to use sd1,
|
||||
it can add the following to its board-specific .dts file.
|
||||
sd1: sd@0x12340000 {
|
||||
sd1: sd@12340000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd1_pmx0>;
|
||||
}
|
||||
|
||||
or
|
||||
|
||||
sd1: sd@0x12340000 {
|
||||
sd1: sd@12340000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd1_pmx1>;
|
||||
}
|
||||
|
||||
@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following:
|
||||
|
||||
For a specific board, if it wants to use uart2 without hardware flow control,
|
||||
it can add the following to its board-specific .dts file.
|
||||
uart2: uart@0xb0070000 {
|
||||
uart2: uart@b0070000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_noflow_pins_a>;
|
||||
}
|
||||
|
||||
@ -136,7 +136,7 @@ Example for rk3188:
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpio0: gpio0@0x2000a000 {
|
||||
gpio0: gpio0@2000a000 {
|
||||
compatible = "rockchip,rk3188-gpio-bank0";
|
||||
reg = <0x2000a000 0x100>;
|
||||
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -149,7 +149,7 @@ Example for rk3188:
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio1@0x2003c000 {
|
||||
gpio1: gpio1@2003c000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x2003c000 0x100>;
|
||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2),
|
||||
...
|
||||
};
|
||||
|
||||
mmc: mmc@0x0 {
|
||||
mmc: mmc@0 {
|
||||
...
|
||||
...
|
||||
vmmc-supply = <&twl_reg1>;
|
||||
|
||||
@ -12,7 +12,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
uart@0x4000c400 {
|
||||
uart@4000c400 {
|
||||
compatible = "energymicro,efm32-uart";
|
||||
reg = <0x4000c400 0x400>;
|
||||
interrupts = <15>;
|
||||
|
||||
@ -14,7 +14,7 @@ Required properties:
|
||||
|
||||
|
||||
Example:
|
||||
ps20: ps2@0x01c2a000 {
|
||||
ps20: ps2@01c2a000 {
|
||||
compatible = "allwinner,sun4i-a10-ps2";
|
||||
reg = <0x01c2a000 0x400>;
|
||||
interrupts = <0 62 4>;
|
||||
|
||||
@ -220,7 +220,7 @@ qmss: qmss@2a40000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
pdsp0@0x2a10000 {
|
||||
pdsp0@2a10000 {
|
||||
reg = <0x2a10000 0x1000>,
|
||||
<0x2a0f000 0x100>,
|
||||
<0x2a0c000 0x3c8>,
|
||||
|
||||
@ -21,7 +21,7 @@ please check:
|
||||
|
||||
Example:
|
||||
|
||||
i2s: i2s@0x77600000 {
|
||||
i2s: i2s@77600000 {
|
||||
compatible = "adi,axi-i2s-1.00.a";
|
||||
reg = <0x77600000 0x1000>;
|
||||
clocks = <&clk 15>, <&audio_clock>;
|
||||
|
||||
@ -20,7 +20,7 @@ please check:
|
||||
|
||||
Example:
|
||||
|
||||
spdif: spdif@0x77400000 {
|
||||
spdif: spdif@77400000 {
|
||||
compatible = "adi,axi-spdif-tx-1.00.a";
|
||||
reg = <0x77600000 0x1000>;
|
||||
clocks = <&clk 15>, <&audio_clock>;
|
||||
|
||||
@ -20,7 +20,7 @@ Optional properties:
|
||||
Example:
|
||||
|
||||
&i2c {
|
||||
ak4613: ak4613@0x10 {
|
||||
ak4613: ak4613@10 {
|
||||
compatible = "asahi-kasei,ak4613";
|
||||
reg = <0x10>;
|
||||
};
|
||||
|
||||
@ -17,7 +17,7 @@ Optional properties:
|
||||
Example 1:
|
||||
|
||||
&i2c {
|
||||
ak4648: ak4648@0x12 {
|
||||
ak4648: ak4648@12 {
|
||||
compatible = "asahi-kasei,ak4642";
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
Example:
|
||||
|
||||
&i2c {
|
||||
max98371: max98371@0x31 {
|
||||
max98371: max98371@31 {
|
||||
compatible = "maxim,max98371";
|
||||
reg = <0x31>;
|
||||
};
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
Example:
|
||||
|
||||
&i2c {
|
||||
max9867: max9867@0x18 {
|
||||
max9867: max9867@18 {
|
||||
compatible = "maxim,max9867";
|
||||
reg = <0x18>;
|
||||
};
|
||||
|
||||
@ -20,7 +20,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
sh_fsi2: sh_fsi2@0xec230000 {
|
||||
sh_fsi2: sh_fsi2@ec230000 {
|
||||
compatible = "renesas,sh_fsi2";
|
||||
reg = <0xec230000 0x400>;
|
||||
interrupts = <0 146 0x4>;
|
||||
|
||||
@ -33,7 +33,7 @@ Required properties on RK3288:
|
||||
|
||||
Example for the rk3188 SPDIF controller:
|
||||
|
||||
spdif: spdif@0x1011e000 {
|
||||
spdif: spdif@1011e000 {
|
||||
compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
|
||||
reg = <0x1011e000 0x2000>;
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -51,7 +51,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
sti_uni_player1: sti-uni-player@0x8D81000 {
|
||||
sti_uni_player1: sti-uni-player@8D81000 {
|
||||
compatible = "st,stih407-uni-player-hdmi";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
@ -63,7 +63,7 @@ Example:
|
||||
st,tdm-mode = <1>;
|
||||
};
|
||||
|
||||
sti_uni_player2: sti-uni-player@0x8D82000 {
|
||||
sti_uni_player2: sti-uni-player@8D82000 {
|
||||
compatible = "st,stih407-uni-player-pcm-out";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
@ -74,7 +74,7 @@ Example:
|
||||
dma-names = "tx";
|
||||
};
|
||||
|
||||
sti_uni_player3: sti-uni-player@0x8D85000 {
|
||||
sti_uni_player3: sti-uni-player@8D85000 {
|
||||
compatible = "st,stih407-uni-player-spdif";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
@ -85,7 +85,7 @@ Example:
|
||||
dma-names = "tx";
|
||||
};
|
||||
|
||||
sti_uni_reader1: sti-uni-reader@0x8D84000 {
|
||||
sti_uni_reader1: sti-uni-reader@8D84000 {
|
||||
compatible = "st,stih407-uni-reader-hdmi";
|
||||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
|
||||
@ -19,7 +19,7 @@ Recommended properties :
|
||||
|
||||
Example:
|
||||
|
||||
spi1: spi@0x4000c400 { /* USART1 */
|
||||
spi1: spi@4000c400 { /* USART1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "energymicro,efm32-spi";
|
||||
|
||||
@ -239,7 +239,7 @@ cpus {
|
||||
* A simple fan controller which supports 10 speeds of operation
|
||||
* (represented as 0-9).
|
||||
*/
|
||||
fan0: fan@0x48 {
|
||||
fan0: fan@48 {
|
||||
...
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <9>;
|
||||
@ -252,7 +252,7 @@ ocp {
|
||||
/*
|
||||
* A simple IC with a single bandgap temperature sensor.
|
||||
*/
|
||||
bandgap0: bandgap@0x0000ED00 {
|
||||
bandgap0: bandgap@0000ED00 {
|
||||
...
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
@ -330,7 +330,7 @@ ocp {
|
||||
/*
|
||||
* A simple IC with several bandgap temperature sensors.
|
||||
*/
|
||||
bandgap0: bandgap@0x0000ED00 {
|
||||
bandgap0: bandgap@0000ED00 {
|
||||
...
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
@ -447,7 +447,7 @@ one thermal zone.
|
||||
/*
|
||||
* A simple IC with a single temperature sensor.
|
||||
*/
|
||||
adc: sensor@0x49 {
|
||||
adc: sensor@49 {
|
||||
...
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
@ -458,7 +458,7 @@ ocp {
|
||||
/*
|
||||
* A simple IC with a single bandgap temperature sensor.
|
||||
*/
|
||||
bandgap0: bandgap@0x0000ED00 {
|
||||
bandgap0: bandgap@0000ED00 {
|
||||
...
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
@ -516,7 +516,7 @@ with many sensors and many cooling devices.
|
||||
/*
|
||||
* An IC with several temperature sensor.
|
||||
*/
|
||||
adc_dummy: sensor@0x50 {
|
||||
adc_dummy: sensor@50 {
|
||||
...
|
||||
#thermal-sensor-cells = <1>; /* sensor internal ID */
|
||||
};
|
||||
|
||||
@ -32,7 +32,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
ufsphy1: ufsphy@0xfc597000 {
|
||||
ufsphy1: ufsphy@fc597000 {
|
||||
compatible = "qcom,ufs-phy-qmp-20nm";
|
||||
reg = <0xfc597000 0x800>;
|
||||
reg-names = "phy_mem";
|
||||
@ -53,7 +53,7 @@ Example:
|
||||
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
|
||||
};
|
||||
|
||||
ufshc@0xfc598000 {
|
||||
ufshc@fc598000 {
|
||||
...
|
||||
phys = <&ufsphy1>;
|
||||
phy-names = "ufsphy";
|
||||
|
||||
@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply
|
||||
regulators or clocks are always on.
|
||||
|
||||
Example:
|
||||
ufshc@0xfc598000 {
|
||||
ufshc@fc598000 {
|
||||
compatible = "jedec,ufs-1.1";
|
||||
reg = <0xfc598000 0x800>;
|
||||
interrupts = <0 28 0>;
|
||||
|
||||
@ -95,6 +95,7 @@ usb: usb@47400000 {
|
||||
reg = <0x47401300 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb0: usb@47401000 {
|
||||
@ -141,6 +142,7 @@ usb: usb@47400000 {
|
||||
reg = <0x47401b00 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb1: usb@47401800 {
|
||||
|
||||
@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Example:
|
||||
|
||||
ehci1: usb@0xfe203e00 {
|
||||
ehci1: usb@fe203e00 {
|
||||
compatible = "st,st-ehci-300x";
|
||||
reg = <0xfe203e00 0x100>;
|
||||
interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
|
||||
|
||||
@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
|
||||
|
||||
Example:
|
||||
|
||||
ohci0: usb@0xfe1ffc00 {
|
||||
ohci0: usb@fe1ffc00 {
|
||||
compatible = "st,st-ohci-300x";
|
||||
reg = <0xfe1ffc00 0x100>;
|
||||
interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
|
||||
|
||||
@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers
|
||||
|
||||
Example:
|
||||
|
||||
watchdog: jz4740-watchdog@0x10002000 {
|
||||
watchdog: jz4740-watchdog@10002000 {
|
||||
compatible = "ingenic,jz4740-watchdog";
|
||||
reg = <0x10002000 0x100>;
|
||||
};
|
||||
|
||||
30
Documentation/media/dvb-drivers/frontends.rst
Normal file
30
Documentation/media/dvb-drivers/frontends.rst
Normal file
@ -0,0 +1,30 @@
|
||||
****************
|
||||
Frontend drivers
|
||||
****************
|
||||
|
||||
Frontend attach headers
|
||||
***********************
|
||||
|
||||
.. Keep it on alphabetic order
|
||||
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/a8293.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/af9013.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/drxk.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/helene.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h
|
||||
.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h
|
||||
|
||||
@ -41,4 +41,5 @@ For more details see the file COPYING in the source distribution of Linux.
|
||||
technisat
|
||||
ttusb-dec
|
||||
udev
|
||||
frontends
|
||||
contributors
|
||||
|
||||
@ -2901,14 +2901,19 @@ userspace buffer and its length:
|
||||
|
||||
struct kvm_s390_irq_state {
|
||||
__u64 buf;
|
||||
__u32 flags;
|
||||
__u32 flags; /* will stay unused for compatibility reasons */
|
||||
__u32 len;
|
||||
__u32 reserved[4];
|
||||
__u32 reserved[4]; /* will stay unused for compatibility reasons */
|
||||
};
|
||||
|
||||
Userspace passes in the above struct and for each pending interrupt a
|
||||
struct kvm_s390_irq is copied to the provided buffer.
|
||||
|
||||
The structure contains a flags and a reserved field for future extensions. As
|
||||
the kernel never checked for flags == 0 and QEMU never pre-zeroed flags and
|
||||
reserved, these fields can not be used in the future without breaking
|
||||
compatibility.
|
||||
|
||||
If -ENOBUFS is returned the buffer provided was too small and userspace
|
||||
may retry with a bigger buffer.
|
||||
|
||||
@ -2932,10 +2937,14 @@ containing a struct kvm_s390_irq_state:
|
||||
|
||||
struct kvm_s390_irq_state {
|
||||
__u64 buf;
|
||||
__u32 flags; /* will stay unused for compatibility reasons */
|
||||
__u32 len;
|
||||
__u32 pad;
|
||||
__u32 reserved[4]; /* will stay unused for compatibility reasons */
|
||||
};
|
||||
|
||||
The restrictions for flags and reserved apply as well.
|
||||
(see KVM_S390_GET_IRQ_STATE)
|
||||
|
||||
The userspace memory referenced by buf contains a struct kvm_s390_irq
|
||||
for each interrupt to be injected into the guest.
|
||||
If one of the interrupts could not be injected for some reason the
|
||||
|
||||
11
MAINTAINERS
11
MAINTAINERS
@ -2047,7 +2047,7 @@ F: arch/arm/boot/dts/uniphier*
|
||||
F: arch/arm/include/asm/hardware/cache-uniphier.h
|
||||
F: arch/arm/mach-uniphier/
|
||||
F: arch/arm/mm/cache-uniphier.c
|
||||
F: arch/arm64/boot/dts/socionext/
|
||||
F: arch/arm64/boot/dts/socionext/uniphier*
|
||||
F: drivers/bus/uniphier-system-bus.c
|
||||
F: drivers/clk/uniphier/
|
||||
F: drivers/gpio/gpio-uniphier.c
|
||||
@ -7767,6 +7767,7 @@ F: security/keys/
|
||||
|
||||
KGDB / KDB /debug_core
|
||||
M: Jason Wessel <jason.wessel@windriver.com>
|
||||
M: Daniel Thompson <daniel.thompson@linaro.org>
|
||||
W: http://kgdb.wiki.kernel.org/
|
||||
L: kgdb-bugreport@lists.sourceforge.net
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb.git
|
||||
@ -12642,6 +12643,14 @@ S: Maintained
|
||||
F: drivers/ssb/
|
||||
F: include/linux/ssb/
|
||||
|
||||
SONY IMX274 SENSOR DRIVER
|
||||
M: Leon Luo <leonl@leopardimaging.com>
|
||||
L: linux-media@vger.kernel.org
|
||||
T: git git://linuxtv.org/media_tree.git
|
||||
S: Maintained
|
||||
F: drivers/media/i2c/imx274.c
|
||||
F: Documentation/devicetree/bindings/media/i2c/imx274.txt
|
||||
|
||||
SONY MEMORYSTICK CARD SUPPORT
|
||||
M: Alex Dubov <oakad@yahoo.com>
|
||||
W: http://tifmxx.berlios.de/
|
||||
|
||||
2
Makefile
2
Makefile
@ -2,7 +2,7 @@
|
||||
VERSION = 4
|
||||
PATCHLEVEL = 15
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc3
|
||||
NAME = Fearless Coyote
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
||||
@ -1,2 +1,4 @@
|
||||
# UAPI Header export list
|
||||
include include/uapi/asm-generic/Kbuild.asm
|
||||
|
||||
generic-y += bpf_perf_event.h
|
||||
|
||||
@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm
|
||||
|
||||
generic-y += auxvec.h
|
||||
generic-y += bitsperlong.h
|
||||
generic-y += bpf_perf_event.h
|
||||
generic-y += errno.h
|
||||
generic-y += fcntl.h
|
||||
generic-y += ioctl.h
|
||||
|
||||
@ -630,6 +630,7 @@
|
||||
reg-names = "phy";
|
||||
status = "disabled";
|
||||
ti,ctrl_mod = <&usb_ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb0: usb@47401000 {
|
||||
@ -678,6 +679,7 @@
|
||||
reg-names = "phy";
|
||||
status = "disabled";
|
||||
ti,ctrl_mod = <&usb_ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb1: usb@47401800 {
|
||||
|
||||
@ -927,7 +927,8 @@
|
||||
reg = <0x48038000 0x2000>,
|
||||
<0x46000000 0x400000>;
|
||||
reg-names = "mpu", "dat";
|
||||
interrupts = <80>, <81>;
|
||||
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
dmas = <&edma 8 2>,
|
||||
@ -941,7 +942,8 @@
|
||||
reg = <0x4803C000 0x2000>,
|
||||
<0x46400000 0x400000>;
|
||||
reg-names = "mpu", "dat";
|
||||
interrupts = <82>, <83>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
dmas = <&edma 10 2>,
|
||||
|
||||
@ -301,8 +301,8 @@
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
dmas = <&edma 16
|
||||
&edma 17>;
|
||||
dmas = <&edma 16 0
|
||||
&edma 17 0>;
|
||||
dma-names = "tx0", "rx0";
|
||||
|
||||
flash: w25q64cvzpig@0 {
|
||||
|
||||
@ -236,6 +236,7 @@
|
||||
usb3_phy: usb3_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_xhci0_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
reg_xhci0_vbus: xhci0-vbus {
|
||||
|
||||
@ -66,6 +66,7 @@
|
||||
usb3_1_phy: usb3_1-phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <&usb3_1_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb3_1_vbus: usb3_1-vbus {
|
||||
|
||||
@ -191,11 +191,13 @@
|
||||
usb3_0_phy: usb3_0_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_0_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb3_1_phy: usb3_1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_1_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
reg_usb3_0_vbus: usb3-vbus0 {
|
||||
|
||||
@ -276,11 +276,13 @@
|
||||
usb2_1_phy: usb2_1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb2_1_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb3_phy: usb3_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
reg_usb3_vbus: usb3-vbus {
|
||||
|
||||
@ -85,7 +85,7 @@
|
||||
timer@20200 {
|
||||
compatible = "arm,cortex-a9-global-timer";
|
||||
reg = <0x20200 0x100>;
|
||||
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&periph_clk>;
|
||||
};
|
||||
|
||||
@ -93,7 +93,7 @@
|
||||
compatible = "arm,cortex-a9-twd-timer";
|
||||
reg = <0x20600 0x20>;
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_LEVEL_HIGH)>;
|
||||
IRQ_TYPE_EDGE_RISING)>;
|
||||
clocks = <&periph_clk>;
|
||||
};
|
||||
|
||||
|
||||
@ -639,5 +639,6 @@
|
||||
|
||||
usbphy: phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -141,10 +141,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
bspi-sel = <0>;
|
||||
flash: m25p80@0 {
|
||||
|
||||
@ -177,10 +177,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&srab {
|
||||
compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
|
||||
status = "okay";
|
||||
|
||||
@ -75,6 +75,7 @@
|
||||
reg = <0x47401300 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&usb_ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb0: usb@47401000 {
|
||||
@ -385,6 +386,7 @@
|
||||
reg = <0x1b00 0x100>;
|
||||
reg-names = "phy";
|
||||
ti,ctrl_mod = <&usb_ctrl_mod>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -433,15 +433,6 @@
|
||||
clock-names = "ipg", "per";
|
||||
};
|
||||
|
||||
srtc: srtc@53fa4000 {
|
||||
compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
|
||||
reg = <0x53fa4000 0x4000>;
|
||||
interrupts = <24>;
|
||||
interrupt-parent = <&tzic>;
|
||||
clocks = <&clks IMX5_CLK_SRTC_GATE>;
|
||||
clock-names = "ipg";
|
||||
};
|
||||
|
||||
iomuxc: iomuxc@53fa8000 {
|
||||
compatible = "fsl,imx53-iomuxc";
|
||||
reg = <0x53fa8000 0x4000>;
|
||||
|
||||
@ -72,7 +72,8 @@
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */
|
||||
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
|
||||
1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
|
||||
|
||||
ethernet@gpmc {
|
||||
pinctrl-names = "default";
|
||||
|
||||
@ -33,11 +33,12 @@
|
||||
hsusb2_phy: hsusb2_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
|
||||
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
|
||||
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
@ -121,7 +122,7 @@
|
||||
|
||||
&mmc3 {
|
||||
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
|
||||
pinctrl-0 = <&mmc3_pins>;
|
||||
pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
|
||||
pinctrl-names = "default";
|
||||
vmmc-supply = <&wl12xx_vmmc>;
|
||||
non-removable;
|
||||
@ -132,8 +133,8 @@
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1273";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
|
||||
ref-clock-frequency = <26000000>;
|
||||
};
|
||||
};
|
||||
@ -157,8 +158,6 @@
|
||||
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
|
||||
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
|
||||
OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
|
||||
OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */
|
||||
>;
|
||||
@ -228,6 +227,12 @@
|
||||
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
|
||||
>;
|
||||
};
|
||||
wl127x_gpio: pinmux_wl127x_gpio_pin {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
|
||||
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
|
||||
@ -85,15 +85,6 @@
|
||||
reg = <0x7c00 0x200>;
|
||||
};
|
||||
|
||||
gpio_intc: interrupt-controller@9880 {
|
||||
compatible = "amlogic,meson-gpio-intc";
|
||||
reg = <0xc1109880 0x10>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hwrng: rng@8100 {
|
||||
compatible = "amlogic,meson-rng";
|
||||
reg = <0x8100 0x8>;
|
||||
@ -191,6 +182,15 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio_intc: interrupt-controller@9880 {
|
||||
compatible = "amlogic,meson-gpio-intc";
|
||||
reg = <0x9880 0x10>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wdt: watchdog@9900 {
|
||||
compatible = "amlogic,meson6-wdt";
|
||||
reg = <0x9900 0x8>;
|
||||
|
||||
@ -56,6 +56,7 @@
|
||||
|
||||
usb_phy: usb_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
vbus_reg: vbus_reg {
|
||||
|
||||
@ -90,6 +90,7 @@
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
|
||||
vcc-supply = <&hsusb2_power>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
tfp410: encoder0 {
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user