leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath10k: remove repeated words in comments

Browse Source 
Found by latest checkpatch.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1603802288-21158-1-git-send-email-kvalo@codeaurora.org
This commit is contained in:
Kalle Valo 2020-10-27 14:38:07 +02:00
parent 3650b228f8
commit 762fd1aec5
6 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/wireless/ath/ath10k/core.c
View File

@ -2636,7 +2636,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (status) if (status)
goto err; goto err;
/* Some of of qca988x solutions are having global reset issue /* Some of qca988x solutions are having global reset issue
* during target initialization. Bypassing PLL setting before * during target initialization. Bypassing PLL setting before
* downloading firmware and letting the SoC run on REF_CLK is * downloading firmware and letting the SoC run on REF_CLK is
* fixing the problem. Corresponding firmware change is also * fixing the problem. Corresponding firmware change is also

2
drivers/net/wireless/ath/ath10k/debug.c
View File

@ -1764,7 +1764,7 @@ static ssize_t ath10k_write_simulate_radar(struct file *file,
struct ath10k *ar = file->private_data; struct ath10k *ar = file->private_data;
struct ath10k_vif *arvif; struct ath10k_vif *arvif;
/* Just check for for the first vif alone, as all the vifs will be /* Just check for the first vif alone, as all the vifs will be
* sharing the same channel and if the channel is disabled, all the * sharing the same channel and if the channel is disabled, all the
* vifs will share the same 'is_started' state. * vifs will share the same 'is_started' state.
*/ */

2
drivers/net/wireless/ath/ath10k/mac.c
View File

@ -5457,7 +5457,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
/* Some firmware revisions don't wait for beacon tx completion before /* Some firmware revisions don't wait for beacon tx completion before
* sending another SWBA event. This could lead to hardware using old * sending another SWBA event. This could lead to hardware using old
* (freed) beacon data in some cases, e.g. tx credit starvation * (freed) beacon data in some cases, e.g. tx credit starvation
* combined with missed TBTT. This is very very rare. * combined with missed TBTT. This is very rare.
* *
* On non-IOMMU-enabled hosts this could be a possible security issue * On non-IOMMU-enabled hosts this could be a possible security issue
* because hw could beacon some random data on the air. On * because hw could beacon some random data on the air. On

2
drivers/net/wireless/ath/ath10k/rx_desc.h
View File

@ -68,7 +68,7 @@ struct rx_attention {
* first_msdu is set. * first_msdu is set.
* *
* peer_idx_invalid * peer_idx_invalid
* Indicates no matching entries within the the max search * Indicates no matching entries within the max search
* count. Only set when first_msdu is set. * count. Only set when first_msdu is set.
* *
* peer_idx_timeout * peer_idx_timeout

2
drivers/net/wireless/ath/ath10k/sdio.c
View File

@ -1248,7 +1248,7 @@ static int ath10k_sdio_bmi_exchange_msg(struct ath10k *ar,
* Wait for first 4 bytes to be in FIFO * Wait for first 4 bytes to be in FIFO
* If CONSERVATIVE_BMI_READ is enabled, also wait for * If CONSERVATIVE_BMI_READ is enabled, also wait for
* a BMI command credit, which indicates that the ENTIRE * a BMI command credit, which indicates that the ENTIRE
* response is available in the the FIFO * response is available in the FIFO
* *
* CASE 3: length > 128 * CASE 3: length > 128
* Wait for the first 4 bytes to be in FIFO * Wait for the first 4 bytes to be in FIFO

4
drivers/net/wireless/ath/ath10k/wmi.h
View File

@ -3832,7 +3832,7 @@ enum wmi_pdev_param {
WMI_PDEV_PARAM_BEACON_TX_MODE, WMI_PDEV_PARAM_BEACON_TX_MODE,
/* /*
* Resource manager off chan mode . * Resource manager off chan mode .
* 0: turn off off chan mode. 1: turn on offchan mode * 0: turn off offchan mode. 1: turn on offchan mode
*/ */
WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
/* /*
@ -3936,7 +3936,7 @@ enum wmi_10x_pdev_param {
WMI_10X_PDEV_PARAM_BEACON_TX_MODE, WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
/* /*
* Resource manager off chan mode . * Resource manager off chan mode .
* 0: turn off off chan mode. 1: turn on offchan mode * 0: turn off offchan mode. 1: turn on offchan mode
*/ */
WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
/* /*