rtl8xxxu: Split USB quirks into gen1 and gen2 quirks

This removes a bunch of if () spaghetti and re-applies the USB bus
quirks for 8188/8192 that had gotten lost.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit is contained in:
Jes Sorensen 2016-04-14 14:59:04 -04:00 committed by Kalle Valo
parent 9b323ee97a
commit 747bf23759
2 changed files with 56 additions and 40 deletions

View File

@ -6899,6 +6899,50 @@ static int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv)
return retval;
}
static void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv)
{
/* Fix USB interface interference issue */
rtl8xxxu_write8(priv, 0xfe40, 0xe0);
rtl8xxxu_write8(priv, 0xfe41, 0x8d);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
/*
* This sets TXDMA_OFFSET_DROP_DATA_EN (bit 9) as well as bits
* 8 and 5, for which I have found no documentation.
*/
rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
/*
* Solve too many protocol error on USB bus.
* Can't do this for 8188/8192 UMC A cut parts
*/
if (!(!priv->chip_cut && priv->vendor_umc)) {
rtl8xxxu_write8(priv, 0xfe40, 0xe6);
rtl8xxxu_write8(priv, 0xfe41, 0x94);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write8(priv, 0xfe40, 0xe0);
rtl8xxxu_write8(priv, 0xfe41, 0x19);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write8(priv, 0xfe40, 0xe5);
rtl8xxxu_write8(priv, 0xfe41, 0x91);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write8(priv, 0xfe40, 0xe2);
rtl8xxxu_write8(priv, 0xfe41, 0x81);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
}
}
static void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv)
{
u32 val32;
val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
val32 |= TXDMA_OFFSET_DROP_DATA_EN;
rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
}
static int rtl8723au_power_on(struct rtl8xxxu_priv *priv)
{
u8 val8;
@ -7563,29 +7607,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
if (ret)
goto exit;
/* Solve too many protocol error on USB bus */
/* Can't do this for 8188/8192 UMC A cut parts */
if (priv->rtl_chip == RTL8723A ||
((priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C ||
priv->rtl_chip == RTL8188C) &&
(priv->chip_cut || !priv->vendor_umc))) {
rtl8xxxu_write8(priv, 0xfe40, 0xe6);
rtl8xxxu_write8(priv, 0xfe41, 0x94);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write8(priv, 0xfe40, 0xe0);
rtl8xxxu_write8(priv, 0xfe41, 0x19);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write8(priv, 0xfe40, 0xe5);
rtl8xxxu_write8(priv, 0xfe41, 0x91);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write8(priv, 0xfe40, 0xe2);
rtl8xxxu_write8(priv, 0xfe41, 0x81);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
}
if (priv->fops->phy_init_antenna_selection)
priv->fops->phy_init_antenna_selection(priv);
@ -7604,6 +7625,12 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
case RTL8723A:
rftable = rtl8723au_radioa_1t_init_table;
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
/* Reduce 80M spur */
rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
break;
case RTL8723B:
rftable = rtl8723bu_radioa_1t_init_table;
@ -7706,23 +7733,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
/*
* Chip specific quirks
*/
if (priv->rtl_chip == RTL8723A) {
/* Fix USB interface interference issue */
rtl8xxxu_write8(priv, 0xfe40, 0xe0);
rtl8xxxu_write8(priv, 0xfe41, 0x8d);
rtl8xxxu_write8(priv, 0xfe42, 0x80);
rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
/* Reduce 80M spur */
rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
} else {
val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
val32 |= TXDMA_OFFSET_DROP_DATA_EN;
rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
}
priv->fops->usb_quirks(priv);
/*
* Presumably this is for 8188EU as well
@ -9712,6 +9723,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.enable_rf = rtl8723a_enable_rf,
.disable_rf = rtl8723a_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8723a_set_tx_power,
.update_rate_mask = rtl8723au_update_rate_mask,
.report_connect = rtl8723au_report_connect,
@ -9746,6 +9758,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
.init_statistics = rtl8723bu_init_statistics,
.enable_rf = rtl8723b_enable_rf,
.disable_rf = rtl8723b_disable_rf,
.usb_quirks = rtl8xxxu_gen2_usb_quirks,
.set_tx_power = rtl8723b_set_tx_power,
.update_rate_mask = rtl8723bu_update_rate_mask,
.report_connect = rtl8723bu_report_connect,
@ -9780,6 +9793,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.enable_rf = rtl8723a_enable_rf,
.disable_rf = rtl8723a_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8723a_set_tx_power,
.update_rate_mask = rtl8723au_update_rate_mask,
.report_connect = rtl8723au_report_connect,
@ -9813,6 +9827,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
.enable_rf = rtl8723b_enable_rf,
.disable_rf = rtl8723b_disable_rf,
.usb_quirks = rtl8xxxu_gen2_usb_quirks,
.set_tx_power = rtl8192e_set_tx_power,
.update_rate_mask = rtl8723bu_update_rate_mask,
.report_connect = rtl8723bu_report_connect,

View File

@ -1293,6 +1293,7 @@ struct rtl8xxxu_fileops {
void (*init_statistics) (struct rtl8xxxu_priv *priv);
void (*enable_rf) (struct rtl8xxxu_priv *priv);
void (*disable_rf) (struct rtl8xxxu_priv *priv);
void (*usb_quirks) (struct rtl8xxxu_priv *priv);
void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel,
bool ht40);
void (*update_rate_mask) (struct rtl8xxxu_priv *priv,