forked from Minki/linux
ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
vreg_boost is Qualcomm platform specific and is also used in hammerhead device. Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-msm@vger.kernel.org Cc: linux-soc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Bhushan Shah <bshah@kde.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
parent
0485ef8e04
commit
73bae19c3a
@ -257,23 +257,6 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vreg_boost: vreg-boost {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "vreg-boost";
|
||||
regulator-min-microvolt = <3150000>;
|
||||
regulator-max-microvolt = <3150000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&boost_bypass_n_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
@ -446,11 +429,6 @@
|
||||
};
|
||||
|
||||
gpios@c000 {
|
||||
boost_bypass_n_pin: boost-bypass {
|
||||
pins = "gpio21";
|
||||
function = "normal";
|
||||
};
|
||||
|
||||
gpio_keys_pin_a: gpio-keys-active {
|
||||
pins = "gpio2", "gpio3", "gpio4", "gpio5";
|
||||
function = "normal";
|
||||
|
@ -2,6 +2,7 @@
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
@ -728,6 +729,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
vreg_boost: vreg-boost {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "vreg-boost";
|
||||
regulator-min-microvolt = <3150000>;
|
||||
regulator-max-microvolt = <3150000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&boost_bypass_n_pin>;
|
||||
};
|
||||
vreg_vph_pwr: vreg-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph-pwr";
|
||||
|
@ -88,6 +88,11 @@
|
||||
<0 0xe1 0 IRQ_TYPE_NONE>,
|
||||
<0 0xe2 0 IRQ_TYPE_NONE>,
|
||||
<0 0xe3 0 IRQ_TYPE_NONE>;
|
||||
|
||||
boost_bypass_n_pin: boost-bypass {
|
||||
pins = "gpio21";
|
||||
function = "normal";
|
||||
};
|
||||
};
|
||||
|
||||
pm8941_mpps: mpps@a000 {
|
||||
|
Loading…
Reference in New Issue
Block a user