drm/i915: Unduplicate VLV phy pre pll enabling code
The code used by the DP and HDMI paths was very similar, so make them share it. Note that this removes the write to signal level registers from the HDMI pre pll enable path, but that's OK since those are set in vlv_hdmi_pre_enable() function. Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-9-git-send-email-ander.conselvan.de.oliveira@intel.com
This commit is contained in:
parent
53d9872511
commit
6da2e61602
@ -3603,6 +3603,7 @@ void chv_phy_post_pll_disable(struct intel_encoder *encoder);
|
||||
void vlv_set_phy_signal_level(struct intel_encoder *encoder,
|
||||
u32 demph_reg_value, u32 preemph_reg_value,
|
||||
u32 uniqtranscale_reg_value, u32 tx3_demph);
|
||||
void vlv_phy_pre_pll_enable(struct intel_encoder *encoder);
|
||||
|
||||
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
|
||||
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
|
||||
|
@ -2791,32 +2791,9 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
|
||||
|
||||
static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
|
||||
{
|
||||
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
|
||||
struct drm_device *dev = encoder->base.dev;
|
||||
struct drm_i915_private *dev_priv = dev->dev_private;
|
||||
struct intel_crtc *intel_crtc =
|
||||
to_intel_crtc(encoder->base.crtc);
|
||||
enum dpio_channel port = vlv_dport_to_channel(dport);
|
||||
int pipe = intel_crtc->pipe;
|
||||
|
||||
intel_dp_prepare(encoder);
|
||||
|
||||
/* Program Tx lane resets to default */
|
||||
mutex_lock(&dev_priv->sb_lock);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
|
||||
DPIO_PCS_TX_LANE2_RESET |
|
||||
DPIO_PCS_TX_LANE1_RESET);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
|
||||
DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
|
||||
DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
|
||||
(1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
|
||||
DPIO_PCS_CLK_SOFT_RESET);
|
||||
|
||||
/* Fix up inter-pair skew failure */
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
|
||||
mutex_unlock(&dev_priv->sb_lock);
|
||||
vlv_phy_pre_pll_enable(encoder);
|
||||
}
|
||||
|
||||
static void chv_pre_enable_dp(struct intel_encoder *encoder)
|
||||
|
@ -395,3 +395,31 @@ void vlv_set_phy_signal_level(struct intel_encoder *encoder,
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
|
||||
mutex_unlock(&dev_priv->sb_lock);
|
||||
}
|
||||
|
||||
void vlv_phy_pre_pll_enable(struct intel_encoder *encoder)
|
||||
{
|
||||
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
|
||||
struct drm_device *dev = encoder->base.dev;
|
||||
struct drm_i915_private *dev_priv = dev->dev_private;
|
||||
struct intel_crtc *intel_crtc =
|
||||
to_intel_crtc(encoder->base.crtc);
|
||||
enum dpio_channel port = vlv_dport_to_channel(dport);
|
||||
int pipe = intel_crtc->pipe;
|
||||
|
||||
/* Program Tx lane resets to default */
|
||||
mutex_lock(&dev_priv->sb_lock);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
|
||||
DPIO_PCS_TX_LANE2_RESET |
|
||||
DPIO_PCS_TX_LANE1_RESET);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
|
||||
DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
|
||||
DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
|
||||
(1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
|
||||
DPIO_PCS_CLK_SOFT_RESET);
|
||||
|
||||
/* Fix up inter-pair skew failure */
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
|
||||
mutex_unlock(&dev_priv->sb_lock);
|
||||
}
|
||||
|
@ -1629,35 +1629,9 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
|
||||
|
||||
static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
|
||||
{
|
||||
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
|
||||
struct drm_device *dev = encoder->base.dev;
|
||||
struct drm_i915_private *dev_priv = dev->dev_private;
|
||||
struct intel_crtc *intel_crtc =
|
||||
to_intel_crtc(encoder->base.crtc);
|
||||
enum dpio_channel port = vlv_dport_to_channel(dport);
|
||||
int pipe = intel_crtc->pipe;
|
||||
|
||||
intel_hdmi_prepare(encoder);
|
||||
|
||||
/* Program Tx lane resets to default */
|
||||
mutex_lock(&dev_priv->sb_lock);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
|
||||
DPIO_PCS_TX_LANE2_RESET |
|
||||
DPIO_PCS_TX_LANE1_RESET);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
|
||||
DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
|
||||
DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
|
||||
(1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
|
||||
DPIO_PCS_CLK_SOFT_RESET);
|
||||
|
||||
/* Fix up inter-pair skew failure */
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
|
||||
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
|
||||
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
|
||||
mutex_unlock(&dev_priv->sb_lock);
|
||||
vlv_phy_pre_pll_enable(encoder);
|
||||
}
|
||||
|
||||
static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
|
||||
|
Loading…
Reference in New Issue
Block a user