forked from Minki/linux
ARM: clps711x: p720t: Define PLD registers as GPIOs
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Alexander Shiyan
Olof Johansson
parent
be95f7aaac
commit
6d640edeb5
@ -23,10 +23,12 @@
|
||||
#include <linux/string.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <linux/backlight.h>
|
||||
#include <linux/basic_mmio_gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/nand-gpio.h>
|
||||
@ -38,7 +40,6 @@
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <mach/syspld.h>
|
||||
|
||||
#include <video/platform_lcd.h>
|
||||
|
||||
@ -52,6 +53,178 @@
|
||||
|
||||
#define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE)
|
||||
|
||||
#define P720T_MMGPIO_BASE (CLPS711X_NR_GPIO)
|
||||
|
||||
#define SYSPLD_PHYS_BASE IOMEM(CS1_PHYS_BASE)
|
||||
|
||||
#define PLD_INT (SYSPLD_PHYS_BASE + 0x000000)
|
||||
#define PLD_INT_MMGPIO_BASE (P720T_MMGPIO_BASE + 0)
|
||||
#define PLD_INT_PENIRQ (PLD_INT_MMGPIO_BASE + 5)
|
||||
#define PLD_INT_UCB_IRQ (PLD_INT_MMGPIO_BASE + 1)
|
||||
#define PLD_INT_KBD_ATN (PLD_INT_MMGPIO_BASE + 0) /* EINT1 */
|
||||
|
||||
#define PLD_PWR (SYSPLD_PHYS_BASE + 0x000004)
|
||||
#define PLD_PWR_MMGPIO_BASE (P720T_MMGPIO_BASE + 8)
|
||||
#define PLD_PWR_EXT (PLD_PWR_MMGPIO_BASE + 5)
|
||||
#define PLD_PWR_MODE (PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */
|
||||
#define PLD_S4_ON (PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */
|
||||
#define PLD_S3_ON (PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */
|
||||
#define PLD_S2_ON (PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */
|
||||
#define PLD_S1_ON (PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */
|
||||
|
||||
#define PLD_KBD (SYSPLD_PHYS_BASE + 0x000008)
|
||||
#define PLD_KBD_MMGPIO_BASE (P720T_MMGPIO_BASE + 16)
|
||||
#define PLD_KBD_WAKE (PLD_KBD_MMGPIO_BASE + 1)
|
||||
#define PLD_KBD_EN (PLD_KBD_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_SPI (SYSPLD_PHYS_BASE + 0x00000c)
|
||||
#define PLD_SPI_MMGPIO_BASE (P720T_MMGPIO_BASE + 24)
|
||||
#define PLD_SPI_EN (PLD_SPI_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_IO (SYSPLD_PHYS_BASE + 0x000010)
|
||||
#define PLD_IO_MMGPIO_BASE (P720T_MMGPIO_BASE + 32)
|
||||
#define PLD_IO_BOOTSEL (PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */
|
||||
#define PLD_IO_USER (PLD_IO_MMGPIO_BASE + 5) /* User defined switch */
|
||||
#define PLD_IO_LED3 (PLD_IO_MMGPIO_BASE + 4)
|
||||
#define PLD_IO_LED2 (PLD_IO_MMGPIO_BASE + 3)
|
||||
#define PLD_IO_LED1 (PLD_IO_MMGPIO_BASE + 2)
|
||||
#define PLD_IO_LED0 (PLD_IO_MMGPIO_BASE + 1)
|
||||
#define PLD_IO_LEDEN (PLD_IO_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_IRDA (SYSPLD_PHYS_BASE + 0x000014)
|
||||
#define PLD_IRDA_MMGPIO_BASE (P720T_MMGPIO_BASE + 40)
|
||||
#define PLD_IRDA_EN (PLD_IRDA_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_COM2 (SYSPLD_PHYS_BASE + 0x000018)
|
||||
#define PLD_COM2_MMGPIO_BASE (P720T_MMGPIO_BASE + 48)
|
||||
#define PLD_COM2_EN (PLD_COM2_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_COM1 (SYSPLD_PHYS_BASE + 0x00001c)
|
||||
#define PLD_COM1_MMGPIO_BASE (P720T_MMGPIO_BASE + 56)
|
||||
#define PLD_COM1_EN (PLD_COM1_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_AUD (SYSPLD_PHYS_BASE + 0x000020)
|
||||
#define PLD_AUD_MMGPIO_BASE (P720T_MMGPIO_BASE + 64)
|
||||
#define PLD_AUD_DIV1 (PLD_AUD_MMGPIO_BASE + 6)
|
||||
#define PLD_AUD_DIV0 (PLD_AUD_MMGPIO_BASE + 5)
|
||||
#define PLD_AUD_CLK_SEL1 (PLD_AUD_MMGPIO_BASE + 4)
|
||||
#define PLD_AUD_CLK_SEL0 (PLD_AUD_MMGPIO_BASE + 3)
|
||||
#define PLD_AUD_MIC_PWR (PLD_AUD_MMGPIO_BASE + 2)
|
||||
#define PLD_AUD_MIC_GAIN (PLD_AUD_MMGPIO_BASE + 1)
|
||||
#define PLD_AUD_CODEC_EN (PLD_AUD_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_CF (SYSPLD_PHYS_BASE + 0x000024)
|
||||
#define PLD_CF_MMGPIO_BASE (P720T_MMGPIO_BASE + 72)
|
||||
#define PLD_CF2_SLEEP (PLD_CF_MMGPIO_BASE + 5)
|
||||
#define PLD_CF1_SLEEP (PLD_CF_MMGPIO_BASE + 4)
|
||||
#define PLD_CF2_nPDREQ (PLD_CF_MMGPIO_BASE + 3)
|
||||
#define PLD_CF1_nPDREQ (PLD_CF_MMGPIO_BASE + 2)
|
||||
#define PLD_CF2_nIRQ (PLD_CF_MMGPIO_BASE + 1)
|
||||
#define PLD_CF1_nIRQ (PLD_CF_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_SDC (SYSPLD_PHYS_BASE + 0x000028)
|
||||
#define PLD_SDC_MMGPIO_BASE (P720T_MMGPIO_BASE + 80)
|
||||
#define PLD_SDC_INT_EN (PLD_SDC_MMGPIO_BASE + 2)
|
||||
#define PLD_SDC_WP (PLD_SDC_MMGPIO_BASE + 1)
|
||||
#define PLD_SDC_CD (PLD_SDC_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_CODEC (SYSPLD_PHYS_BASE + 0x400000)
|
||||
#define PLD_CODEC_MMGPIO_BASE (P720T_MMGPIO_BASE + 88)
|
||||
#define PLD_CODEC_IRQ3 (PLD_CODEC_MMGPIO_BASE + 4)
|
||||
#define PLD_CODEC_IRQ2 (PLD_CODEC_MMGPIO_BASE + 3)
|
||||
#define PLD_CODEC_IRQ1 (PLD_CODEC_MMGPIO_BASE + 2)
|
||||
#define PLD_CODEC_EN (PLD_CODEC_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_BRITE (SYSPLD_PHYS_BASE + 0x400004)
|
||||
#define PLD_BRITE_MMGPIO_BASE (P720T_MMGPIO_BASE + 96)
|
||||
#define PLD_BRITE_UP (PLD_BRITE_MMGPIO_BASE + 1)
|
||||
#define PLD_BRITE_DN (PLD_BRITE_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_LCDEN (SYSPLD_PHYS_BASE + 0x400008)
|
||||
#define PLD_LCDEN_MMGPIO_BASE (P720T_MMGPIO_BASE + 104)
|
||||
#define PLD_LCDEN_EN (PLD_LCDEN_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_TCH (SYSPLD_PHYS_BASE + 0x400010)
|
||||
#define PLD_TCH_MMGPIO_BASE (P720T_MMGPIO_BASE + 112)
|
||||
#define PLD_TCH_PENIRQ (PLD_TCH_MMGPIO_BASE + 1)
|
||||
#define PLD_TCH_EN (PLD_TCH_MMGPIO_BASE + 0)
|
||||
|
||||
#define PLD_GPIO (SYSPLD_PHYS_BASE + 0x400014)
|
||||
#define PLD_GPIO_MMGPIO_BASE (P720T_MMGPIO_BASE + 120)
|
||||
#define PLD_GPIO2 (PLD_GPIO_MMGPIO_BASE + 2)
|
||||
#define PLD_GPIO1 (PLD_GPIO_MMGPIO_BASE + 1)
|
||||
#define PLD_GPIO0 (PLD_GPIO_MMGPIO_BASE + 0)
|
||||
|
||||
static struct gpio p720t_gpios[] __initconst = {
|
||||
{ PLD_S1_ON, GPIOF_OUT_INIT_LOW, "PLD_S1_ON" },
|
||||
{ PLD_S2_ON, GPIOF_OUT_INIT_LOW, "PLD_S2_ON" },
|
||||
{ PLD_S3_ON, GPIOF_OUT_INIT_LOW, "PLD_S3_ON" },
|
||||
{ PLD_S4_ON, GPIOF_OUT_INIT_LOW, "PLD_S4_ON" },
|
||||
{ PLD_KBD_EN, GPIOF_OUT_INIT_LOW, "PLD_KBD_EN" },
|
||||
{ PLD_SPI_EN, GPIOF_OUT_INIT_LOW, "PLD_SPI_EN" },
|
||||
{ PLD_IO_USER, GPIOF_OUT_INIT_LOW, "PLD_IO_USER" },
|
||||
{ PLD_IO_LED0, GPIOF_OUT_INIT_LOW, "PLD_IO_LED0" },
|
||||
{ PLD_IO_LED1, GPIOF_OUT_INIT_LOW, "PLD_IO_LED1" },
|
||||
{ PLD_IO_LED2, GPIOF_OUT_INIT_LOW, "PLD_IO_LED2" },
|
||||
{ PLD_IO_LED3, GPIOF_OUT_INIT_LOW, "PLD_IO_LED3" },
|
||||
{ PLD_IO_LEDEN, GPIOF_OUT_INIT_LOW, "PLD_IO_LEDEN" },
|
||||
{ PLD_IRDA_EN, GPIOF_OUT_INIT_LOW, "PLD_IRDA_EN" },
|
||||
{ PLD_COM1_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM1_EN" },
|
||||
{ PLD_COM2_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM2_EN" },
|
||||
{ PLD_CODEC_EN, GPIOF_OUT_INIT_LOW, "PLD_CODEC_EN" },
|
||||
{ PLD_LCDEN_EN, GPIOF_OUT_INIT_LOW, "PLD_LCDEN_EN" },
|
||||
{ PLD_TCH_EN, GPIOF_OUT_INIT_LOW, "PLD_TCH_EN" },
|
||||
{ P720T_USERLED,GPIOF_OUT_INIT_LOW, "USER_LED" },
|
||||
};
|
||||
|
||||
static struct resource p720t_mmgpio_resource[] __initdata = {
|
||||
DEFINE_RES_MEM_NAMED(0, 4, "dat"),
|
||||
};
|
||||
|
||||
static struct bgpio_pdata p720t_mmgpio_pdata = {
|
||||
.ngpio = 8,
|
||||
};
|
||||
|
||||
static struct platform_device p720t_mmgpio __initdata = {
|
||||
.name = "basic-mmio-gpio",
|
||||
.id = -1,
|
||||
.resource = p720t_mmgpio_resource,
|
||||
.num_resources = ARRAY_SIZE(p720t_mmgpio_resource),
|
||||
.dev = {
|
||||
.platform_data = &p720t_mmgpio_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase)
|
||||
{
|
||||
p720t_mmgpio_resource[0].start = (unsigned long)addrbase;
|
||||
p720t_mmgpio_pdata.base = gpiobase;
|
||||
|
||||
platform_device_register(&p720t_mmgpio);
|
||||
}
|
||||
|
||||
static struct {
|
||||
void __iomem *addrbase;
|
||||
int gpiobase;
|
||||
} mmgpios[] __initconst = {
|
||||
{ PLD_INT, PLD_INT_MMGPIO_BASE },
|
||||
{ PLD_PWR, PLD_PWR_MMGPIO_BASE },
|
||||
{ PLD_KBD, PLD_KBD_MMGPIO_BASE },
|
||||
{ PLD_SPI, PLD_SPI_MMGPIO_BASE },
|
||||
{ PLD_IO, PLD_IO_MMGPIO_BASE },
|
||||
{ PLD_IRDA, PLD_IRDA_MMGPIO_BASE },
|
||||
{ PLD_COM2, PLD_COM2_MMGPIO_BASE },
|
||||
{ PLD_COM1, PLD_COM1_MMGPIO_BASE },
|
||||
{ PLD_AUD, PLD_AUD_MMGPIO_BASE },
|
||||
{ PLD_CF, PLD_CF_MMGPIO_BASE },
|
||||
{ PLD_SDC, PLD_SDC_MMGPIO_BASE },
|
||||
{ PLD_CODEC, PLD_CODEC_MMGPIO_BASE },
|
||||
{ PLD_BRITE, PLD_BRITE_MMGPIO_BASE },
|
||||
{ PLD_LCDEN, PLD_LCDEN_MMGPIO_BASE },
|
||||
{ PLD_TCH, PLD_TCH_MMGPIO_BASE },
|
||||
{ PLD_GPIO, PLD_GPIO_MMGPIO_BASE },
|
||||
};
|
||||
|
||||
static struct resource p720t_nand_resource[] __initdata = {
|
||||
DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
|
||||
};
|
||||
@ -93,11 +266,15 @@ static struct platform_device p720t_nand_pdev __initdata = {
|
||||
static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
|
||||
{
|
||||
if (power) {
|
||||
PLD_LCDEN = PLD_LCDEN_EN;
|
||||
PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON;
|
||||
gpio_set_value(PLD_LCDEN_EN, 1);
|
||||
gpio_set_value(PLD_S1_ON, 1);
|
||||
gpio_set_value(PLD_S2_ON, 1);
|
||||
gpio_set_value(PLD_S4_ON, 1);
|
||||
} else {
|
||||
PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON);
|
||||
PLD_LCDEN = 0;
|
||||
gpio_set_value(PLD_S1_ON, 0);
|
||||
gpio_set_value(PLD_S2_ON, 0);
|
||||
gpio_set_value(PLD_S4_ON, 0);
|
||||
gpio_set_value(PLD_LCDEN_EN, 0);
|
||||
}
|
||||
}
|
||||
|
||||
@ -107,10 +284,7 @@ static struct plat_lcd_data p720t_lcd_power_pdata = {
|
||||
|
||||
static void p720t_lcd_backlight_set_intensity(int intensity)
|
||||
{
|
||||
if (intensity)
|
||||
PLD_PWR |= PLD_S3_ON;
|
||||
else
|
||||
PLD_PWR = 0;
|
||||
gpio_set_value(PLD_S3_ON, intensity);
|
||||
}
|
||||
|
||||
static struct generic_bl_info p720t_lcd_backlight_pdata = {
|
||||
@ -120,19 +294,6 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = {
|
||||
.set_bl_intensity = p720t_lcd_backlight_set_intensity,
|
||||
};
|
||||
|
||||
/*
|
||||
* Map the P720T system PLD. It occupies two address spaces:
|
||||
* 0x10000000 and 0x10400000. We map both regions as one.
|
||||
*/
|
||||
static struct map_desc p720t_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = SYSPLD_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(SYSPLD_PHYS_BASE),
|
||||
.length = SZ_8M,
|
||||
.type = MT_DEVICE,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init
|
||||
fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
|
||||
{
|
||||
@ -158,33 +319,6 @@ fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
|
||||
}
|
||||
}
|
||||
|
||||
static void __init p720t_map_io(void)
|
||||
{
|
||||
clps711x_map_io();
|
||||
iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
|
||||
}
|
||||
|
||||
static void __init p720t_init_early(void)
|
||||
{
|
||||
/*
|
||||
* Power down as much as possible in case we don't
|
||||
* have the drivers loaded.
|
||||
*/
|
||||
PLD_LCDEN = 0;
|
||||
PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
|
||||
|
||||
PLD_KBD = 0;
|
||||
PLD_IO = 0;
|
||||
PLD_IRDA = 0;
|
||||
PLD_CODEC = 0;
|
||||
PLD_TCH = 0;
|
||||
PLD_SPI = 0;
|
||||
if (!IS_ENABLED(CONFIG_DEBUG_LL)) {
|
||||
PLD_COM2 = 0;
|
||||
PLD_COM1 = 0;
|
||||
}
|
||||
}
|
||||
|
||||
static struct gpio_led p720t_gpio_leds[] = {
|
||||
{
|
||||
.name = "User LED",
|
||||
@ -200,12 +334,20 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
|
||||
|
||||
static void __init p720t_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
clps711x_devices_init();
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(mmgpios); i++)
|
||||
p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase);
|
||||
|
||||
platform_device_register(&p720t_nand_pdev);
|
||||
}
|
||||
|
||||
static void __init p720t_init_late(void)
|
||||
{
|
||||
platform_device_register(&p720t_nand_pdev);
|
||||
WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios)));
|
||||
|
||||
platform_device_register_data(&platform_bus, "platform-lcd", 0,
|
||||
&p720t_lcd_power_pdata,
|
||||
sizeof(p720t_lcd_power_pdata));
|
||||
@ -223,8 +365,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
|
||||
.atag_offset = 0x100,
|
||||
.nr_irqs = CLPS711X_NR_IRQS,
|
||||
.fixup = fixup_p720t,
|
||||
.map_io = p720t_map_io,
|
||||
.init_early = p720t_init_early,
|
||||
.map_io = clps711x_map_io,
|
||||
.init_irq = clps711x_init_irq,
|
||||
.init_time = clps711x_timer_init,
|
||||
.init_machine = p720t_init,
|
||||
|
||||
@ -1,116 +0,0 @@
|
||||
/*
|
||||
* arch/arm/mach-clps711x/include/mach/syspld.h
|
||||
*
|
||||
* System Control PLD register definitions.
|
||||
*
|
||||
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#ifndef __ASM_ARCH_SYSPLD_H
|
||||
#define __ASM_ARCH_SYSPLD_H
|
||||
|
||||
#define SYSPLD_PHYS_BASE (0x10000000)
|
||||
#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE)
|
||||
|
||||
#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off)))
|
||||
|
||||
#define PLD_INT SYSPLD_REG(u32, 0x000000)
|
||||
#define PLD_INT_PENIRQ (1 << 5)
|
||||
#define PLD_INT_UCB_IRQ (1 << 1)
|
||||
#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */
|
||||
|
||||
#define PLD_PWR SYSPLD_REG(u32, 0x000004)
|
||||
#define PLD_PWR_EXT (1 << 5)
|
||||
#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */
|
||||
#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */
|
||||
#define PLD_S3_ON (1 << 2) /* LCD backlight enable */
|
||||
#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */
|
||||
#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */
|
||||
|
||||
#define PLD_KBD SYSPLD_REG(u32, 0x000008)
|
||||
#define PLD_KBD_WAKE (1 << 1)
|
||||
#define PLD_KBD_EN (1 << 0)
|
||||
|
||||
#define PLD_SPI SYSPLD_REG(u32, 0x00000c)
|
||||
#define PLD_SPI_EN (1 << 0)
|
||||
|
||||
#define PLD_IO SYSPLD_REG(u32, 0x000010)
|
||||
#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */
|
||||
#define PLD_IO_USER (1 << 5) /* user defined switch */
|
||||
#define PLD_IO_LED3 (1 << 4)
|
||||
#define PLD_IO_LED2 (1 << 3)
|
||||
#define PLD_IO_LED1 (1 << 2)
|
||||
#define PLD_IO_LED0 (1 << 1)
|
||||
#define PLD_IO_LEDEN (1 << 0)
|
||||
|
||||
#define PLD_IRDA SYSPLD_REG(u32, 0x000014)
|
||||
#define PLD_IRDA_EN (1 << 0)
|
||||
|
||||
#define PLD_COM2 SYSPLD_REG(u32, 0x000018)
|
||||
#define PLD_COM2_EN (1 << 0)
|
||||
|
||||
#define PLD_COM1 SYSPLD_REG(u32, 0x00001c)
|
||||
#define PLD_COM1_EN (1 << 0)
|
||||
|
||||
#define PLD_AUD SYSPLD_REG(u32, 0x000020)
|
||||
#define PLD_AUD_DIV1 (1 << 6)
|
||||
#define PLD_AUD_DIV0 (1 << 5)
|
||||
#define PLD_AUD_CLK_SEL1 (1 << 4)
|
||||
#define PLD_AUD_CLK_SEL0 (1 << 3)
|
||||
#define PLD_AUD_MIC_PWR (1 << 2)
|
||||
#define PLD_AUD_MIC_GAIN (1 << 1)
|
||||
#define PLD_AUD_CODEC_EN (1 << 0)
|
||||
|
||||
#define PLD_CF SYSPLD_REG(u32, 0x000024)
|
||||
#define PLD_CF2_SLEEP (1 << 5)
|
||||
#define PLD_CF1_SLEEP (1 << 4)
|
||||
#define PLD_CF2_nPDREQ (1 << 3)
|
||||
#define PLD_CF1_nPDREQ (1 << 2)
|
||||
#define PLD_CF2_nIRQ (1 << 1)
|
||||
#define PLD_CF1_nIRQ (1 << 0)
|
||||
|
||||
#define PLD_SDC SYSPLD_REG(u32, 0x000028)
|
||||
#define PLD_SDC_INT_EN (1 << 2)
|
||||
#define PLD_SDC_WP (1 << 1)
|
||||
#define PLD_SDC_CD (1 << 0)
|
||||
|
||||
#define PLD_FPGA SYSPLD_REG(u32, 0x00002c)
|
||||
|
||||
#define PLD_CODEC SYSPLD_REG(u32, 0x400000)
|
||||
#define PLD_CODEC_IRQ3 (1 << 4)
|
||||
#define PLD_CODEC_IRQ2 (1 << 3)
|
||||
#define PLD_CODEC_IRQ1 (1 << 2)
|
||||
#define PLD_CODEC_EN (1 << 0)
|
||||
|
||||
#define PLD_BRITE SYSPLD_REG(u32, 0x400004)
|
||||
#define PLD_BRITE_UP (1 << 1)
|
||||
#define PLD_BRITE_DN (1 << 0)
|
||||
|
||||
#define PLD_LCDEN SYSPLD_REG(u32, 0x400008)
|
||||
#define PLD_LCDEN_EN (1 << 0)
|
||||
|
||||
#define PLD_ID SYSPLD_REG(u32, 0x40000c)
|
||||
|
||||
#define PLD_TCH SYSPLD_REG(u32, 0x400010)
|
||||
#define PLD_TCH_PENIRQ (1 << 1)
|
||||
#define PLD_TCH_EN (1 << 0)
|
||||
|
||||
#define PLD_GPIO SYSPLD_REG(u32, 0x400014)
|
||||
#define PLD_GPIO2 (1 << 2)
|
||||
#define PLD_GPIO1 (1 << 1)
|
||||
#define PLD_GPIO0 (1 << 0)
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user