Merge branch 'ks8851'

Stephen Boyd says:

====================
ks8851 DT/regulator/gpio updates

This set of patches properly documents the micrel ks8851 spi ethernet
controller, converts to devm_regulator_get_optional() to make error
paths slightly simpler, and finally adds supports for another
optional regulator and a reset gpio. This allows me to use the ks8851
on my MSM8960 CDP board.

Changes since v1:
 * Dropped vendor prefix patch as that should go through DT tree
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2014-05-24 14:03:33 -04:00
commit 6c705d1362
2 changed files with 74 additions and 12 deletions

View File

@ -1,9 +1,18 @@
Micrel KS8851 Ethernet mac Micrel KS8851 Ethernet mac (MLL)
Required properties: Required properties:
- compatible = "micrel,ks8851-ml" of parallel interface - compatible = "micrel,ks8851-mll" of parallel interface
- reg : 2 physical address and size of registers for data and command - reg : 2 physical address and size of registers for data and command
- interrupts : interrupt connection - interrupts : interrupt connection
Micrel KS8851 Ethernet mac (SPI)
Required properties:
- compatible = "micrel,ks8851" or the deprecated "ks8851"
- reg : chip select number
- interrupts : interrupt connection
Optional properties: Optional properties:
- vdd-supply: supply for Ethernet mac - vdd-supply: analog 3.3V supply for Ethernet mac
- vdd-io-supply: digital 1.8V IO supply for Ethernet mac
- reset-gpios: reset_n input pin

View File

@ -26,6 +26,8 @@
#include <linux/regulator/consumer.h> #include <linux/regulator/consumer.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include "ks8851.h" #include "ks8851.h"
@ -85,6 +87,8 @@ union ks8851_tx_hdr {
* @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom * @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom
* @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM. * @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM.
* @vdd_reg: Optional regulator supplying the chip * @vdd_reg: Optional regulator supplying the chip
* @vdd_io: Optional digital power supply for IO
* @gpio: Optional reset_n gpio
* *
* The @lock ensures that the chip is protected when certain operations are * The @lock ensures that the chip is protected when certain operations are
* in progress. When the read or write packet transfer is in progress, most * in progress. When the read or write packet transfer is in progress, most
@ -133,6 +137,8 @@ struct ks8851_net {
struct eeprom_93cx6 eeprom; struct eeprom_93cx6 eeprom;
struct regulator *vdd_reg; struct regulator *vdd_reg;
struct regulator *vdd_io;
int gpio;
}; };
static int msg_enable; static int msg_enable;
@ -1404,6 +1410,7 @@ static int ks8851_probe(struct spi_device *spi)
struct ks8851_net *ks; struct ks8851_net *ks;
int ret; int ret;
unsigned cider; unsigned cider;
int gpio;
ndev = alloc_etherdev(sizeof(struct ks8851_net)); ndev = alloc_etherdev(sizeof(struct ks8851_net));
if (!ndev) if (!ndev)
@ -1417,7 +1424,38 @@ static int ks8851_probe(struct spi_device *spi)
ks->spidev = spi; ks->spidev = spi;
ks->tx_space = 6144; ks->tx_space = 6144;
ks->vdd_reg = regulator_get_optional(&spi->dev, "vdd"); gpio = of_get_named_gpio_flags(spi->dev.of_node, "reset-gpios",
0, NULL);
if (gpio == -EPROBE_DEFER) {
ret = gpio;
goto err_gpio;
}
ks->gpio = gpio;
if (gpio_is_valid(gpio)) {
ret = devm_gpio_request_one(&spi->dev, gpio,
GPIOF_OUT_INIT_LOW, "ks8851_rst_n");
if (ret) {
dev_err(&spi->dev, "reset gpio request failed\n");
goto err_gpio;
}
}
ks->vdd_io = devm_regulator_get_optional(&spi->dev, "vdd-io");
if (IS_ERR(ks->vdd_io)) {
ret = PTR_ERR(ks->vdd_io);
if (ret == -EPROBE_DEFER)
goto err_reg_io;
} else {
ret = regulator_enable(ks->vdd_io);
if (ret) {
dev_err(&spi->dev, "regulator vdd_io enable fail: %d\n",
ret);
goto err_reg_io;
}
}
ks->vdd_reg = devm_regulator_get_optional(&spi->dev, "vdd");
if (IS_ERR(ks->vdd_reg)) { if (IS_ERR(ks->vdd_reg)) {
ret = PTR_ERR(ks->vdd_reg); ret = PTR_ERR(ks->vdd_reg);
if (ret == -EPROBE_DEFER) if (ret == -EPROBE_DEFER)
@ -1425,12 +1463,16 @@ static int ks8851_probe(struct spi_device *spi)
} else { } else {
ret = regulator_enable(ks->vdd_reg); ret = regulator_enable(ks->vdd_reg);
if (ret) { if (ret) {
dev_err(&spi->dev, "regulator enable fail: %d\n", dev_err(&spi->dev, "regulator vdd enable fail: %d\n",
ret); ret);
goto err_reg_en; goto err_reg;
} }
} }
if (gpio_is_valid(gpio)) {
usleep_range(10000, 11000);
gpio_set_value(gpio, 1);
}
mutex_init(&ks->lock); mutex_init(&ks->lock);
spin_lock_init(&ks->statelock); spin_lock_init(&ks->statelock);
@ -1527,13 +1569,16 @@ err_netdev:
free_irq(ndev->irq, ks); free_irq(ndev->irq, ks);
err_irq: err_irq:
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
err_id: err_id:
if (!IS_ERR(ks->vdd_reg)) if (!IS_ERR(ks->vdd_reg))
regulator_disable(ks->vdd_reg); regulator_disable(ks->vdd_reg);
err_reg_en:
if (!IS_ERR(ks->vdd_reg))
regulator_put(ks->vdd_reg);
err_reg: err_reg:
if (!IS_ERR(ks->vdd_io))
regulator_disable(ks->vdd_io);
err_reg_io:
err_gpio:
free_netdev(ndev); free_netdev(ndev);
return ret; return ret;
} }
@ -1547,18 +1592,26 @@ static int ks8851_remove(struct spi_device *spi)
unregister_netdev(priv->netdev); unregister_netdev(priv->netdev);
free_irq(spi->irq, priv); free_irq(spi->irq, priv);
if (!IS_ERR(priv->vdd_reg)) { if (gpio_is_valid(priv->gpio))
gpio_set_value(priv->gpio, 0);
if (!IS_ERR(priv->vdd_reg))
regulator_disable(priv->vdd_reg); regulator_disable(priv->vdd_reg);
regulator_put(priv->vdd_reg); if (!IS_ERR(priv->vdd_io))
} regulator_disable(priv->vdd_io);
free_netdev(priv->netdev); free_netdev(priv->netdev);
return 0; return 0;
} }
static const struct of_device_id ks8851_match_table[] = {
{ .compatible = "micrel,ks8851" },
{ }
};
static struct spi_driver ks8851_driver = { static struct spi_driver ks8851_driver = {
.driver = { .driver = {
.name = "ks8851", .name = "ks8851",
.of_match_table = ks8851_match_table,
.owner = THIS_MODULE, .owner = THIS_MODULE,
.pm = &ks8851_pm_ops, .pm = &ks8851_pm_ops,
}, },