forked from Minki/linux
[POWERPC] 83xx: Add device tree source for Wind River SBC834x board.
This adds the device tree source for the Wind River SBC834x board. It is based on the MPC834x_MDS DTS, with the biggest difference being the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, and this file is also dts-v1 format. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Paul Gortmaker
Kumar Gala
parent
a43414ccb4
commit
6c538111e3
243
arch/powerpc/boot/dts/sbc8349.dts
Normal file
243
arch/powerpc/boot/dts/sbc8349.dts
Normal file
@ -0,0 +1,243 @@
|
||||
/*
|
||||
* SBC8349E Device Tree Source
|
||||
*
|
||||
* Copyright 2007 Wind River Inc.
|
||||
*
|
||||
* Paul Gortmaker (see MAINTAINERS for contact information)
|
||||
*
|
||||
* -based largely on the Freescale MPC834x_MDS dts.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "SBC8349E";
|
||||
compatible = "SBC834xE";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8349@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <0x20>; // 32 bytes
|
||||
i-cache-line-size = <0x20>; // 32 bytes
|
||||
d-cache-size = <0x8000>; // L1, 32K
|
||||
i-cache-size = <0x8000>; // L1, 32K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>; // 256MB at 0
|
||||
};
|
||||
|
||||
soc8349@e0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
ranges = <0x0 0xe0000000 0x00100000>;
|
||||
reg = <0xe0000000 0x00000200>;
|
||||
bus-frequency = <0>;
|
||||
|
||||
wdt@200 {
|
||||
compatible = "mpc83xx_wdt";
|
||||
reg = <0x200 0x100>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <0xe 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <0xf 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
compatible = "fsl_spi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <0x10 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
mode = "cpu";
|
||||
};
|
||||
|
||||
/* phy type (ULPI or SERIAL) are only types supported for MPH */
|
||||
/* port = 0 or 1 */
|
||||
usb@22000 {
|
||||
compatible = "fsl-usb2-mph";
|
||||
reg = <0x22000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <0x27 0x8>;
|
||||
phy_type = "ulpi";
|
||||
port1;
|
||||
};
|
||||
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
||||
usb@23000 {
|
||||
device_type = "usb";
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x23000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <0x26 0x8>;
|
||||
dr_mode = "otg";
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x24520 0x20>;
|
||||
|
||||
phy0: ethernet-phy@19 {
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <0x14 0x8>;
|
||||
reg = <0x19>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
phy1: ethernet-phy@1a {
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <0x15 0x8>;
|
||||
reg = <0x1a>;
|
||||
device_type = "ethernet-phy";
|
||||
};
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "TSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
phy-handle = <&phy0>;
|
||||
linux,network-index = <0>;
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "TSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
phy-handle = <&phy1>;
|
||||
linux,network-index = <1>;
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x9 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0xa 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
};
|
||||
|
||||
/* May need to remove if on a part without crypto engine */
|
||||
crypto@30000 {
|
||||
model = "SEC2";
|
||||
compatible = "talitos";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <0xb 0x8>;
|
||||
interrupt-parent = <&ipic>;
|
||||
num-channels = <4>;
|
||||
channel-fifo-len = <0x18>;
|
||||
exec-units-mask = <0x0000007e>;
|
||||
/* desc mask is for rev2.0,
|
||||
* we need runtime fixup for >2.0 */
|
||||
descriptor-types-mask = <0x01010ebf>;
|
||||
};
|
||||
|
||||
/* IPIC
|
||||
* interrupts cell = <intr #, sense>
|
||||
* sense values match linux IORESOURCE_IRQ_* defines:
|
||||
* sense == 8: Level, low assertion
|
||||
* sense == 2: Edge, high-to-low change
|
||||
*/
|
||||
ipic: pic@700 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x700 0x100>;
|
||||
device_type = "ipic";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pci@e0008500 {
|
||||
cell-index = <1>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
|
||||
/* IDSEL 0x11 */
|
||||
0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
|
||||
0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
|
||||
0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
|
||||
0x8800 0x0 0x0 0x4 &ipic 0x17 0x8>;
|
||||
|
||||
interrupt-parent = <&ipic>;
|
||||
interrupts = <0x42 0x8>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
||||
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
||||
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
|
||||
clock-frequency = <66666666>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
reg = <0xe0008500 0x100>;
|
||||
compatible = "fsl,mpc8349-pci";
|
||||
device_type = "pci";
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user