forked from Minki/linux
drm/i915: split Ironlake CRTC enable/disable code
This way we can also use it in CRTC prepare/commit. Also makes it easier to split out FDI and other code. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This commit is contained in:
Jesse Barnes
Chris Wilson
parent
e642abbf30
commit
6be4a6078e
@ -1848,7 +1848,7 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
|
||||
DRM_DEBUG_KMS("FDI train done.\n");
|
||||
}
|
||||
|
||||
static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
|
||||
static void ironlake_crtc_enable(struct drm_crtc *crtc)
|
||||
{
|
||||
struct drm_device *dev = crtc->dev;
|
||||
struct drm_i915_private *dev_priv = dev->dev_private;
|
||||
@ -1881,6 +1881,354 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
|
||||
temp = I915_READ(pipeconf_reg);
|
||||
pipe_bpc = temp & PIPE_BPC_MASK;
|
||||
|
||||
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
||||
temp = I915_READ(PCH_LVDS);
|
||||
if ((temp & LVDS_PORT_EN) == 0) {
|
||||
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
|
||||
POSTING_READ(PCH_LVDS);
|
||||
}
|
||||
}
|
||||
|
||||
if (!HAS_eDP) {
|
||||
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
/*
|
||||
* make the BPC in FDI Rx be consistent with that in
|
||||
* pipeconf reg.
|
||||
*/
|
||||
temp &= ~(0x7 << 16);
|
||||
temp |= (pipe_bpc << 11);
|
||||
temp &= ~(7 << 19);
|
||||
temp |= (intel_crtc->fdi_lanes - 1) << 19;
|
||||
I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
|
||||
I915_READ(fdi_rx_reg);
|
||||
udelay(200);
|
||||
|
||||
/* Switch from Rawclk to PCDclk */
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
|
||||
I915_READ(fdi_rx_reg);
|
||||
udelay(200);
|
||||
|
||||
/* Enable CPU FDI TX PLL, always on for Ironlake */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
|
||||
I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
udelay(100);
|
||||
}
|
||||
}
|
||||
|
||||
/* Enable panel fitting for LVDS */
|
||||
if (dev_priv->pch_pf_size &&
|
||||
(intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
|
||||
|| HAS_eDP || intel_pch_has_edp(crtc))) {
|
||||
/* Force use of hard-coded filter coefficients
|
||||
* as some pre-programmed values are broken,
|
||||
* e.g. x201.
|
||||
*/
|
||||
I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1,
|
||||
PF_ENABLE | PF_FILTER_MED_3x3);
|
||||
I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS,
|
||||
dev_priv->pch_pf_pos);
|
||||
I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ,
|
||||
dev_priv->pch_pf_size);
|
||||
}
|
||||
|
||||
/* Enable CPU pipe */
|
||||
temp = I915_READ(pipeconf_reg);
|
||||
if ((temp & PIPEACONF_ENABLE) == 0) {
|
||||
I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
|
||||
I915_READ(pipeconf_reg);
|
||||
udelay(100);
|
||||
}
|
||||
|
||||
/* configure and enable CPU plane */
|
||||
temp = I915_READ(dspcntr_reg);
|
||||
if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
|
||||
I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
|
||||
/* Flush the plane changes */
|
||||
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
|
||||
}
|
||||
|
||||
if (!HAS_eDP) {
|
||||
/* For PCH output, training FDI link */
|
||||
if (IS_GEN6(dev))
|
||||
gen6_fdi_link_train(crtc);
|
||||
else
|
||||
ironlake_fdi_link_train(crtc);
|
||||
|
||||
/* enable PCH DPLL */
|
||||
temp = I915_READ(pch_dpll_reg);
|
||||
if ((temp & DPLL_VCO_ENABLE) == 0) {
|
||||
I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
|
||||
I915_READ(pch_dpll_reg);
|
||||
}
|
||||
udelay(200);
|
||||
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
/* Be sure PCH DPLL SEL is set */
|
||||
temp = I915_READ(PCH_DPLL_SEL);
|
||||
if (trans_dpll_sel == 0 &&
|
||||
(temp & TRANSA_DPLL_ENABLE) == 0)
|
||||
temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
|
||||
else if (trans_dpll_sel == 1 &&
|
||||
(temp & TRANSB_DPLL_ENABLE) == 0)
|
||||
temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
|
||||
I915_WRITE(PCH_DPLL_SEL, temp);
|
||||
I915_READ(PCH_DPLL_SEL);
|
||||
}
|
||||
/* set transcoder timing */
|
||||
I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
|
||||
I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
|
||||
I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
|
||||
|
||||
I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
|
||||
I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
|
||||
I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
|
||||
|
||||
/* enable normal train */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
|
||||
FDI_TX_ENHANCE_FRAME_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
||||
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
|
||||
} else {
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
temp |= FDI_LINK_TRAIN_NONE;
|
||||
}
|
||||
I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
/* wait one idle pattern time */
|
||||
udelay(100);
|
||||
|
||||
/* For PCH DP, enable TRANS_DP_CTL */
|
||||
if (HAS_PCH_CPT(dev) &&
|
||||
intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
|
||||
int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
|
||||
int reg;
|
||||
|
||||
reg = I915_READ(trans_dp_ctl);
|
||||
reg &= ~(TRANS_DP_PORT_SEL_MASK |
|
||||
TRANS_DP_SYNC_MASK);
|
||||
reg |= (TRANS_DP_OUTPUT_ENABLE |
|
||||
TRANS_DP_ENH_FRAMING);
|
||||
|
||||
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
|
||||
reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
|
||||
if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
|
||||
reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
|
||||
|
||||
switch (intel_trans_dp_port_sel(crtc)) {
|
||||
case PCH_DP_B:
|
||||
reg |= TRANS_DP_PORT_SEL_B;
|
||||
break;
|
||||
case PCH_DP_C:
|
||||
reg |= TRANS_DP_PORT_SEL_C;
|
||||
break;
|
||||
case PCH_DP_D:
|
||||
reg |= TRANS_DP_PORT_SEL_D;
|
||||
break;
|
||||
default:
|
||||
DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
|
||||
reg |= TRANS_DP_PORT_SEL_B;
|
||||
break;
|
||||
}
|
||||
|
||||
I915_WRITE(trans_dp_ctl, reg);
|
||||
POSTING_READ(trans_dp_ctl);
|
||||
}
|
||||
|
||||
/* enable PCH transcoder */
|
||||
temp = I915_READ(transconf_reg);
|
||||
/*
|
||||
* make the BPC in transcoder be consistent with
|
||||
* that in pipeconf reg.
|
||||
*/
|
||||
temp &= ~PIPE_BPC_MASK;
|
||||
temp |= pipe_bpc;
|
||||
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
|
||||
I915_READ(transconf_reg);
|
||||
|
||||
if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100))
|
||||
DRM_ERROR("failed to enable transcoder\n");
|
||||
}
|
||||
|
||||
intel_crtc_load_lut(crtc);
|
||||
|
||||
intel_update_fbc(crtc, &crtc->mode);
|
||||
}
|
||||
|
||||
static void ironlake_crtc_disable(struct drm_crtc *crtc)
|
||||
{
|
||||
struct drm_device *dev = crtc->dev;
|
||||
struct drm_i915_private *dev_priv = dev->dev_private;
|
||||
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
||||
int pipe = intel_crtc->pipe;
|
||||
int plane = intel_crtc->plane;
|
||||
int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
|
||||
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
|
||||
int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
|
||||
int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
|
||||
int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
|
||||
int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
|
||||
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
|
||||
int trans_dpll_sel = (pipe == 0) ? 0 : 1;
|
||||
u32 temp;
|
||||
u32 pipe_bpc;
|
||||
|
||||
temp = I915_READ(pipeconf_reg);
|
||||
pipe_bpc = temp & PIPE_BPC_MASK;
|
||||
|
||||
drm_vblank_off(dev, pipe);
|
||||
/* Disable display plane */
|
||||
temp = I915_READ(dspcntr_reg);
|
||||
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
|
||||
I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
|
||||
/* Flush the plane changes */
|
||||
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
|
||||
I915_READ(dspbase_reg);
|
||||
}
|
||||
|
||||
if (dev_priv->cfb_plane == plane &&
|
||||
dev_priv->display.disable_fbc)
|
||||
dev_priv->display.disable_fbc(dev);
|
||||
|
||||
/* disable cpu pipe, disable after all planes disabled */
|
||||
temp = I915_READ(pipeconf_reg);
|
||||
if ((temp & PIPEACONF_ENABLE) != 0) {
|
||||
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
|
||||
|
||||
/* wait for cpu pipe off, pipe state */
|
||||
if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50))
|
||||
DRM_ERROR("failed to turn off cpu pipe\n");
|
||||
} else
|
||||
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
|
||||
|
||||
udelay(100);
|
||||
|
||||
/* Disable PF */
|
||||
I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0);
|
||||
I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0);
|
||||
|
||||
/* disable CPU FDI tx and PCH FDI rx */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
/* BPC in FDI rx is consistent with that in pipeconf */
|
||||
temp &= ~(0x07 << 16);
|
||||
temp |= (pipe_bpc << 11);
|
||||
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
udelay(100);
|
||||
|
||||
/* still set train pattern 1 */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
||||
I915_WRITE(fdi_tx_reg, temp);
|
||||
POSTING_READ(fdi_tx_reg);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
||||
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
||||
} else {
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
||||
}
|
||||
I915_WRITE(fdi_rx_reg, temp);
|
||||
POSTING_READ(fdi_rx_reg);
|
||||
|
||||
udelay(100);
|
||||
|
||||
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
||||
temp = I915_READ(PCH_LVDS);
|
||||
I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN);
|
||||
I915_READ(PCH_LVDS);
|
||||
udelay(100);
|
||||
}
|
||||
|
||||
/* disable PCH transcoder */
|
||||
temp = I915_READ(transconf_reg);
|
||||
if ((temp & TRANS_ENABLE) != 0) {
|
||||
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
|
||||
|
||||
/* wait for PCH transcoder off, transcoder state */
|
||||
if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50))
|
||||
DRM_ERROR("failed to disable transcoder\n");
|
||||
}
|
||||
|
||||
temp = I915_READ(transconf_reg);
|
||||
/* BPC in transcoder is consistent with that in pipeconf */
|
||||
temp &= ~PIPE_BPC_MASK;
|
||||
temp |= pipe_bpc;
|
||||
I915_WRITE(transconf_reg, temp);
|
||||
I915_READ(transconf_reg);
|
||||
udelay(100);
|
||||
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
/* disable TRANS_DP_CTL */
|
||||
int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
|
||||
int reg;
|
||||
|
||||
reg = I915_READ(trans_dp_ctl);
|
||||
reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
|
||||
I915_WRITE(trans_dp_ctl, reg);
|
||||
POSTING_READ(trans_dp_ctl);
|
||||
|
||||
/* disable DPLL_SEL */
|
||||
temp = I915_READ(PCH_DPLL_SEL);
|
||||
if (trans_dpll_sel == 0)
|
||||
temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
|
||||
else
|
||||
temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
|
||||
I915_WRITE(PCH_DPLL_SEL, temp);
|
||||
I915_READ(PCH_DPLL_SEL);
|
||||
|
||||
}
|
||||
|
||||
/* disable PCH DPLL */
|
||||
temp = I915_READ(pch_dpll_reg);
|
||||
I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
|
||||
I915_READ(pch_dpll_reg);
|
||||
|
||||
/* Switch from PCDclk to Rawclk */
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
temp &= ~FDI_SEL_PCDCLK;
|
||||
I915_WRITE(fdi_rx_reg, temp);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
/* Disable CPU FDI TX PLL */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
udelay(100);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
temp &= ~FDI_RX_PLL_ENABLE;
|
||||
I915_WRITE(fdi_rx_reg, temp);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
/* Wait for the clocks to turn off. */
|
||||
udelay(100);
|
||||
}
|
||||
|
||||
static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
|
||||
{
|
||||
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
||||
int pipe = intel_crtc->pipe;
|
||||
int plane = intel_crtc->plane;
|
||||
|
||||
/* XXX: When our outputs are all unaware of DPMS modes other than off
|
||||
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
|
||||
*/
|
||||
@ -1889,331 +2237,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
|
||||
case DRM_MODE_DPMS_STANDBY:
|
||||
case DRM_MODE_DPMS_SUSPEND:
|
||||
DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
|
||||
|
||||
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
||||
temp = I915_READ(PCH_LVDS);
|
||||
if ((temp & LVDS_PORT_EN) == 0) {
|
||||
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
|
||||
POSTING_READ(PCH_LVDS);
|
||||
}
|
||||
}
|
||||
|
||||
if (!HAS_eDP) {
|
||||
|
||||
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
/*
|
||||
* make the BPC in FDI Rx be consistent with that in
|
||||
* pipeconf reg.
|
||||
*/
|
||||
temp &= ~(0x7 << 16);
|
||||
temp |= (pipe_bpc << 11);
|
||||
temp &= ~(7 << 19);
|
||||
temp |= (intel_crtc->fdi_lanes - 1) << 19;
|
||||
I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
|
||||
I915_READ(fdi_rx_reg);
|
||||
udelay(200);
|
||||
|
||||
/* Switch from Rawclk to PCDclk */
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
|
||||
I915_READ(fdi_rx_reg);
|
||||
udelay(200);
|
||||
|
||||
/* Enable CPU FDI TX PLL, always on for Ironlake */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
|
||||
I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
udelay(100);
|
||||
}
|
||||
}
|
||||
|
||||
/* Enable panel fitting for LVDS */
|
||||
if (dev_priv->pch_pf_size &&
|
||||
(intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
|
||||
|| HAS_eDP || intel_pch_has_edp(crtc))) {
|
||||
/* Force use of hard-coded filter coefficients
|
||||
* as some pre-programmed values are broken,
|
||||
* e.g. x201.
|
||||
*/
|
||||
I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1,
|
||||
PF_ENABLE | PF_FILTER_MED_3x3);
|
||||
I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS,
|
||||
dev_priv->pch_pf_pos);
|
||||
I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ,
|
||||
dev_priv->pch_pf_size);
|
||||
}
|
||||
|
||||
/* Enable CPU pipe */
|
||||
temp = I915_READ(pipeconf_reg);
|
||||
if ((temp & PIPEACONF_ENABLE) == 0) {
|
||||
I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
|
||||
I915_READ(pipeconf_reg);
|
||||
udelay(100);
|
||||
}
|
||||
|
||||
/* configure and enable CPU plane */
|
||||
temp = I915_READ(dspcntr_reg);
|
||||
if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
|
||||
I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
|
||||
/* Flush the plane changes */
|
||||
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
|
||||
}
|
||||
|
||||
if (!HAS_eDP) {
|
||||
/* For PCH output, training FDI link */
|
||||
if (IS_GEN6(dev))
|
||||
gen6_fdi_link_train(crtc);
|
||||
else
|
||||
ironlake_fdi_link_train(crtc);
|
||||
|
||||
/* enable PCH DPLL */
|
||||
temp = I915_READ(pch_dpll_reg);
|
||||
if ((temp & DPLL_VCO_ENABLE) == 0) {
|
||||
I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
|
||||
I915_READ(pch_dpll_reg);
|
||||
}
|
||||
udelay(200);
|
||||
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
/* Be sure PCH DPLL SEL is set */
|
||||
temp = I915_READ(PCH_DPLL_SEL);
|
||||
if (trans_dpll_sel == 0 &&
|
||||
(temp & TRANSA_DPLL_ENABLE) == 0)
|
||||
temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
|
||||
else if (trans_dpll_sel == 1 &&
|
||||
(temp & TRANSB_DPLL_ENABLE) == 0)
|
||||
temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
|
||||
I915_WRITE(PCH_DPLL_SEL, temp);
|
||||
I915_READ(PCH_DPLL_SEL);
|
||||
}
|
||||
|
||||
/* set transcoder timing */
|
||||
I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
|
||||
I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
|
||||
I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
|
||||
|
||||
I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
|
||||
I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
|
||||
I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
|
||||
|
||||
/* enable normal train */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
|
||||
FDI_TX_ENHANCE_FRAME_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
||||
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
|
||||
} else {
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
temp |= FDI_LINK_TRAIN_NONE;
|
||||
}
|
||||
I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
/* wait one idle pattern time */
|
||||
udelay(100);
|
||||
|
||||
/* For PCH DP, enable TRANS_DP_CTL */
|
||||
if (HAS_PCH_CPT(dev) &&
|
||||
intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
|
||||
int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
|
||||
int reg;
|
||||
|
||||
reg = I915_READ(trans_dp_ctl);
|
||||
reg &= ~(TRANS_DP_PORT_SEL_MASK |
|
||||
TRANS_DP_SYNC_MASK);
|
||||
reg |= (TRANS_DP_OUTPUT_ENABLE |
|
||||
TRANS_DP_ENH_FRAMING);
|
||||
|
||||
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
|
||||
reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
|
||||
if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
|
||||
reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
|
||||
|
||||
switch (intel_trans_dp_port_sel(crtc)) {
|
||||
case PCH_DP_B:
|
||||
reg |= TRANS_DP_PORT_SEL_B;
|
||||
break;
|
||||
case PCH_DP_C:
|
||||
reg |= TRANS_DP_PORT_SEL_C;
|
||||
break;
|
||||
case PCH_DP_D:
|
||||
reg |= TRANS_DP_PORT_SEL_D;
|
||||
break;
|
||||
default:
|
||||
DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
|
||||
reg |= TRANS_DP_PORT_SEL_B;
|
||||
break;
|
||||
}
|
||||
|
||||
I915_WRITE(trans_dp_ctl, reg);
|
||||
POSTING_READ(trans_dp_ctl);
|
||||
}
|
||||
|
||||
/* enable PCH transcoder */
|
||||
temp = I915_READ(transconf_reg);
|
||||
/*
|
||||
* make the BPC in transcoder be consistent with
|
||||
* that in pipeconf reg.
|
||||
*/
|
||||
temp &= ~PIPE_BPC_MASK;
|
||||
temp |= pipe_bpc;
|
||||
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
|
||||
I915_READ(transconf_reg);
|
||||
|
||||
if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100))
|
||||
DRM_ERROR("failed to enable transcoder\n");
|
||||
}
|
||||
|
||||
intel_crtc_load_lut(crtc);
|
||||
|
||||
intel_update_fbc(crtc, &crtc->mode);
|
||||
ironlake_crtc_enable(crtc);
|
||||
break;
|
||||
|
||||
case DRM_MODE_DPMS_OFF:
|
||||
DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
|
||||
|
||||
drm_vblank_off(dev, pipe);
|
||||
/* Disable display plane */
|
||||
temp = I915_READ(dspcntr_reg);
|
||||
if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
|
||||
I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
|
||||
/* Flush the plane changes */
|
||||
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
|
||||
I915_READ(dspbase_reg);
|
||||
}
|
||||
|
||||
if (dev_priv->cfb_plane == plane &&
|
||||
dev_priv->display.disable_fbc)
|
||||
dev_priv->display.disable_fbc(dev);
|
||||
|
||||
/* disable cpu pipe, disable after all planes disabled */
|
||||
temp = I915_READ(pipeconf_reg);
|
||||
if ((temp & PIPEACONF_ENABLE) != 0) {
|
||||
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
|
||||
|
||||
/* wait for cpu pipe off, pipe state */
|
||||
if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50))
|
||||
DRM_ERROR("failed to turn off cpu pipe\n");
|
||||
} else
|
||||
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
|
||||
|
||||
udelay(100);
|
||||
|
||||
/* Disable PF */
|
||||
I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0);
|
||||
I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0);
|
||||
|
||||
/* disable CPU FDI tx and PCH FDI rx */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
/* BPC in FDI rx is consistent with that in pipeconf */
|
||||
temp &= ~(0x07 << 16);
|
||||
temp |= (pipe_bpc << 11);
|
||||
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
udelay(100);
|
||||
|
||||
/* still set train pattern 1 */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
||||
I915_WRITE(fdi_tx_reg, temp);
|
||||
POSTING_READ(fdi_tx_reg);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
||||
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
||||
} else {
|
||||
temp &= ~FDI_LINK_TRAIN_NONE;
|
||||
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
||||
}
|
||||
I915_WRITE(fdi_rx_reg, temp);
|
||||
POSTING_READ(fdi_rx_reg);
|
||||
|
||||
udelay(100);
|
||||
|
||||
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
|
||||
temp = I915_READ(PCH_LVDS);
|
||||
I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN);
|
||||
I915_READ(PCH_LVDS);
|
||||
udelay(100);
|
||||
}
|
||||
|
||||
/* disable PCH transcoder */
|
||||
temp = I915_READ(transconf_reg);
|
||||
if ((temp & TRANS_ENABLE) != 0) {
|
||||
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
|
||||
|
||||
/* wait for PCH transcoder off, transcoder state */
|
||||
if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50))
|
||||
DRM_ERROR("failed to disable transcoder\n");
|
||||
}
|
||||
|
||||
temp = I915_READ(transconf_reg);
|
||||
/* BPC in transcoder is consistent with that in pipeconf */
|
||||
temp &= ~PIPE_BPC_MASK;
|
||||
temp |= pipe_bpc;
|
||||
I915_WRITE(transconf_reg, temp);
|
||||
I915_READ(transconf_reg);
|
||||
udelay(100);
|
||||
|
||||
if (HAS_PCH_CPT(dev)) {
|
||||
/* disable TRANS_DP_CTL */
|
||||
int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
|
||||
int reg;
|
||||
|
||||
reg = I915_READ(trans_dp_ctl);
|
||||
reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
|
||||
I915_WRITE(trans_dp_ctl, reg);
|
||||
POSTING_READ(trans_dp_ctl);
|
||||
|
||||
/* disable DPLL_SEL */
|
||||
temp = I915_READ(PCH_DPLL_SEL);
|
||||
if (trans_dpll_sel == 0)
|
||||
temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
|
||||
else
|
||||
temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
|
||||
I915_WRITE(PCH_DPLL_SEL, temp);
|
||||
I915_READ(PCH_DPLL_SEL);
|
||||
|
||||
}
|
||||
|
||||
/* disable PCH DPLL */
|
||||
temp = I915_READ(pch_dpll_reg);
|
||||
I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
|
||||
I915_READ(pch_dpll_reg);
|
||||
|
||||
/* Switch from PCDclk to Rawclk */
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
temp &= ~FDI_SEL_PCDCLK;
|
||||
I915_WRITE(fdi_rx_reg, temp);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
/* Disable CPU FDI TX PLL */
|
||||
temp = I915_READ(fdi_tx_reg);
|
||||
I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
|
||||
I915_READ(fdi_tx_reg);
|
||||
udelay(100);
|
||||
|
||||
temp = I915_READ(fdi_rx_reg);
|
||||
temp &= ~FDI_RX_PLL_ENABLE;
|
||||
I915_WRITE(fdi_rx_reg, temp);
|
||||
I915_READ(fdi_rx_reg);
|
||||
|
||||
/* Wait for the clocks to turn off. */
|
||||
udelay(100);
|
||||
ironlake_crtc_disable(crtc);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user