ARM: sun7i: olinuxino lime2: Convert to DT label based syntax
In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
Maxime Ripard
parent
5b178791a9
commit
6bd0027ee1
@ -57,145 +57,6 @@
|
||||
model = "Olimex A20-OLinuXino-LIME2";
|
||||
compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
|
||||
|
||||
soc@01c00000 {
|
||||
mmc0: mmc@01c0f000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy: phy@01c13400 {
|
||||
usb1_vbus-supply = <®_usb1_vbus>;
|
||||
usb2_vbus-supply = <®_usb2_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci0: usb@01c14000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci0: usb@01c14400 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ahci: sata@01c18000 {
|
||||
target-supply = <®_ahci_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci1: usb@01c1c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci1: usb@01c1c400 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@01c20800 {
|
||||
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
|
||||
allwinner,pins = "PC3";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
led_pins_olinuxinolime: led_pins@0 {
|
||||
allwinner,pins = "PH2";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
uart0: serial@01c28000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@01c2ac00 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
axp209: pmic@34 {
|
||||
compatible = "x-powers,axp209";
|
||||
reg = <0x34>;
|
||||
interrupt-parent = <&nmi_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
acin-supply = <®_axp_ipsout>;
|
||||
vin2-supply = <®_axp_ipsout>;
|
||||
vin3-supply = <®_axp_ipsout>;
|
||||
ldo24in-supply = <®_axp_ipsout>;
|
||||
ldo3in-supply = <®_axp_ipsout>;
|
||||
|
||||
regulators {
|
||||
vdd_rtc: ldo1 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
avcc: ldo2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_csi0: ldo3 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <3500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_csi1: ldo4 {
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_cpu: dcdc2 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <2275000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_int: dcdc3 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <3500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c1: i2c@01c2b000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gmac: ethernet@01c50000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_pins_rgmii_a>;
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
@ -208,20 +69,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
reg_ahci_5v: ahci-5v {
|
||||
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
|
||||
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
reg_usb1_vbus: usb1-vbus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
reg_usb2_vbus: usb2-vbus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
reg_axp_ipsout: axp_ipsout {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "axp-ipsout";
|
||||
@ -230,3 +77,154 @@
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&ahci {
|
||||
target-supply = <®_ahci_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_pins_rgmii_a>;
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
axp209: pmic@34 {
|
||||
compatible = "x-powers,axp209";
|
||||
reg = <0x34>;
|
||||
interrupt-parent = <&nmi_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
acin-supply = <®_axp_ipsout>;
|
||||
vin2-supply = <®_axp_ipsout>;
|
||||
vin3-supply = <®_axp_ipsout>;
|
||||
ldo24in-supply = <®_axp_ipsout>;
|
||||
ldo3in-supply = <®_axp_ipsout>;
|
||||
|
||||
regulators {
|
||||
vdd_rtc: ldo1 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
avcc: ldo2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_csi0: ldo3 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <3500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_csi1: ldo4 {
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_cpu: dcdc2 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <2275000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_int: dcdc3 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <3500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
|
||||
allwinner,pins = "PC3";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
led_pins_olinuxinolime: led_pins@0 {
|
||||
allwinner,pins = "PH2";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
®_ahci_5v {
|
||||
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
|
||||
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_usb1_vbus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_usb2_vbus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb1_vbus-supply = <®_usb1_vbus>;
|
||||
usb2_vbus-supply = <®_usb2_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user