Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Volume is a little higher than usual due to a set of gpio fixes for
  Davinci platforms that's been around a while, still seemed appropriate
  to not hold off until next merge window.

  Besides that it's the usual mix of minor fixes, mostly corrections of
  small stuff in device trees.

  Major stability-related one is the removal of a regulator from DT on
  Rock960, since DVFS caused undervoltage. I expect it'll be restored
  once they figure out the underlying issue"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  MAINTAINERS: Remove unused Qualcomm SoC mailing list
  ARM: davinci: dm644x: set the GPIO base to 0
  ARM: davinci: da830: set the GPIO base to 0
  ARM: davinci: dm355: set the GPIO base to 0
  ARM: davinci: dm646x: set the GPIO base to 0
  ARM: davinci: dm365: set the GPIO base to 0
  ARM: davinci: da850: set the GPIO base to 0
  gpio: davinci: restore a way to manually specify the GPIO base
  ARM: davinci: dm644x: define gpio interrupts as separate resources
  ARM: davinci: dm355: define gpio interrupts as separate resources
  ARM: davinci: dm646x: define gpio interrupts as separate resources
  ARM: davinci: dm365: define gpio interrupts as separate resources
  ARM: davinci: da8xx: define gpio interrupts as separate resources
  ARM: dts: at91: sama5d2: use the divided clock for SMC
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node
  ARM: dts: rockchip: Remove @0 from the veyron memory node
  arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
  arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
  arm64: dts: sdm845-mtp: Reserve reserved gpios
  arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
  ...

MAINTAINERS

@@ -1923,7 +1923,6 @@ ARM/QUALCOMM SUPPORT
 M:	Andy Gross <andy.gross@linaro.org>
 M:	David Brown <david.brown@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
-L:	linux-soc@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
@@ -2931,7 +2930,6 @@ F:	arch/mips/include/asm/mach-bcm47xx/*
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
@@ -3077,7 +3075,6 @@ F:	drivers/net/ethernet/broadcom/genet/
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/broadcom/cygnus-linux.git

arch/arm/boot/dts/am3517-evm.dts

@@ -228,7 +228,7 @@
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };
 
 &mmc3 {

arch/arm/boot/dts/am3517-som.dtsi

@@ -163,7 +163,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};

arch/arm/boot/dts/imx51-zii-rdu1.dts

@@ -492,12 +492,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -129,7 +129,7 @@
 };
 
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;

arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

@@ -35,7 +35,7 @@
  * jumpering combinations for the long run.
  */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;

arch/arm/boot/dts/rk3288-veyron.dtsi

@@ -10,7 +10,11 @@
 #include "rk3288.dtsi"
 
 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

arch/arm/boot/dts/sama5d2.dtsi

@@ -314,7 +314,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";
 
 			nand_controller: nand-controller {

arch/arm/mach-davinci/da830.c

@@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = {
 };
 
 static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.ngpio = 128,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 128,
 };
 
 int __init da830_register_gpio(void)

arch/arm/mach-davinci/da850.c

@@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 }
 
 static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.ngpio = 144,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 144,
 };
 
 int __init da850_register_gpio(void)

arch/arm/mach-davinci/devices-da8xx.c

@@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = {
 	},
 	{ /* interrupt */
 		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO1,
+		.end	= IRQ_DA8XX_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO2,
+		.end	= IRQ_DA8XX_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO3,
+		.end	= IRQ_DA8XX_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO4,
+		.end	= IRQ_DA8XX_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO5,
+		.end	= IRQ_DA8XX_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO6,
+		.end	= IRQ_DA8XX_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO7,
+		.end	= IRQ_DA8XX_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO8,
 		.end	= IRQ_DA8XX_GPIO8,
 		.flags	= IORESOURCE_IRQ,
 	},

arch/arm/mach-davinci/dm355.c

@@ -548,12 +548,44 @@ static struct resource dm355_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 };
 

arch/arm/mach-davinci/dm365.c

@@ -267,12 +267,49 @@ static struct resource dm365_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO1,
+		.end	= IRQ_DM365_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO2,
+		.end	= IRQ_DM365_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO3,
+		.end	= IRQ_DM365_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO4,
+		.end	= IRQ_DM365_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO5,
+		.end	= IRQ_DM365_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO6,
+		.end	= IRQ_DM365_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO7,
 		.end	= IRQ_DM365_GPIO7,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 	.gpio_unbanked	= 8,
 };

arch/arm/mach-davinci/dm644x.c

@@ -492,12 +492,34 @@ static struct resource dm644_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 71,
 };
 

arch/arm/mach-davinci/dm646x.c

@@ -442,12 +442,24 @@ static struct resource dm646x_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK1,
+		.end	= IRQ_DM646X_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK2,
 		.end	= IRQ_DM646X_GPIOBNK2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 43,
 };
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -750,6 +750,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 	struct modem_private_data *priv = port->private_data;
 	int ret;
 
+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;
 

arch/arm/mach-omap2/prm44xx.c

@@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void)
  * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
  * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
  */
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
 {
 	s32 inst = omap4_prmst_get_prm_dev_inst();
 

arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi

@@ -241,3 +241,7 @@
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};

arch/arm64/boot/dts/qcom/sdm845-mtp.dts

@@ -352,6 +352,10 @@
 	status = "okay";
 };
 
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
 &uart9 {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

@@ -153,7 +153,7 @@
 };
 
 &pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi

@@ -57,18 +57,6 @@
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
 };
 
 &cpu_l0 {

arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi

@@ -36,7 +36,7 @@
 
 	wkup_uart0: serial@42300000 {
 		compatible = "ti,am654-uart";
-		reg = <0x00 0x42300000 0x00 0x100>;
+		reg = <0x42300000 0x100>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;

drivers/gpio/gpio-davinci.c

@@ -258,7 +258,7 @@ static int davinci_gpio_probe(struct platform_device *pdev)
 	chips->chip.set = davinci_gpio_set;
 
 	chips->chip.ngpio = ngpio;
-	chips->chip.base = -1;
+	chips->chip.base = pdata->no_auto_base ? pdata->base : -1;
 
 #ifdef CONFIG_OF_GPIO
 	chips->chip.of_gpio_n_cells = 2;

include/linux/platform_data/gpio-davinci.h

@@ -17,6 +17,8 @@
 #define __DAVINCI_GPIO_PLATFORM_H
 
 struct davinci_gpio_platform_data {
+	bool	no_auto_base;
+	u32	base;
 	u32	ngpio;
 	u32	gpio_unbanked;
 };