RISC-V Patches for the 5.20 Merge Window, Part 2

There's still a handful of new features in here, but there are a lot of
 fixes/cleanups as well:
 
 * Support for the Zicbom for explicit cache-block management, along with
   the necessary bits to make the non-standard cache management ops on
   the Allwinner D1 function.
 * Support for the Zihintpause extension, which codifies a go-slow
   instruction used for cpu_relax().
 * Support for the Sstc extension for supervisor-mode timer/counter
   management.
 * Many device tree fixes and cleanups, including a large set for the
   Canaan device trees.
 * A handful of fixes and cleanups for the PMU driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmL21egTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiSsiD/9cCN/7ndt4v7N65PUya+mVYC9VPppB
 d/UC74M0mMUHQbtdtHzlCZVHW0pxc6Pc8oDTWLviKxNSHa6LQkLQJ/RZZz4YlH91
 V/vh6DCZv9TRfHJS2E6jMUKEAVAiGg+723gE5EqLc5uapIBrvmiluQwBIQcu8dj1
 egfdxJH3IVrEZWwROrYtffDgw4sipENuch5v4yhk4vH0bMlatcIM+hMpPZgOfbgX
 xip4K4B/HTAJRn5vunrlCQzYdg+g9l5iEy73A/A9HfzOFCMTMJFp1zHvIrzLUjKC
 79MZza3GJLpwMG4C1j8u+qOL01wVrQcA5gNp+14UuUedl/jHaceZwBkCL4cmFyGP
 LE94Ed7+6cIJJH/NTcNfOOSD9byOePjfan+qJIlRBxZGbHKt+Ip6Lu2FGeftpXah
 MlhhN5S1nGTuFpn7XGRsYrB/VLBD/KWsLxvWBZZWsSYwHwnFA9ZTUbcuQfxTJ+Qq
 mH9wZIZ/z8MaEjKcdooIPHjKl+CFjDpVYWge83/t12LLYC9ryTM4vIlltZ84bs6i
 2CMSNjBRSuPa7FQPHW+a6CWAjz2Lv1u9jCSH0iI62ytZR5/zinI39tv6LvwbypbY
 VfWBnrtLNLlZmNbk13ODV64ayhTpZoZXWGL2TvkJklBqEPqda+9/nopiqb8a8jFZ
 yEmKFdEqrb1LAg==
 =caji
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:
 "There's still a handful of new features in here, but there are a lot
  of fixes/cleanups as well:

   - Support for the Zicbom extension for explicit cache-block
     management, along with the necessary bits to make the non-standard
     cache management ops on the Allwinner D1 function

   - Support for the Zihintpause extension, which codifies a go-slow
     instruction used for cpu_relax()

   - Support for the Sstc extension for supervisor-mode timer/counter
     management

   - Many device tree fixes and cleanups, including a large set for the
     Canaan device trees

   - A handful of fixes and cleanups for the PMU driver"

* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
  dt-bindings: gpio: sifive: add gpio-line-names
  wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
  RISC-V: KVM: Support sstc extension
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32
  RISC-V: Prefer sstc extension if available
  RISC-V: Enable sstc extension parsing from DT
  RISC-V: Add SSTC extension CSR details
  riscv:uprobe fix SR_SPIE set/clear handling
  dt-bindings: riscv: fix SiFive l2-cache's cache-sets
  riscv: ensure cpu_ops_sbi is declared
  RISC-V: cpu_ops_spinwait.c should include head.h
  RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
  riscv: dts: starfive: correct number of external interrupts
  riscv: dts: sifive unmatched: Add PWM controlled LEDs
  riscv/purgatory: Omit use of bin2c
  riscv/purgatory: hard-code obj-y in Makefile
  ...

Documentation/devicetree/bindings/display/ilitek,ili9341.txt

@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};

Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

@@ -21,8 +21,10 @@ properties:
   compatible:
     items:
       - enum:
+          - adafruit,yx240qv29
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
       - const: ilitek,ili9341
 
   reg: true
@@ -47,16 +49,26 @@ properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
     - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -73,5 +85,14 @@ examples:
                 };
             };
         };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
     };
 ...

Documentation/devicetree/bindings/gpio/sifive,gpio.yaml

@@ -46,6 +46,10 @@ properties:
     maximum: 32
     default: 16
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   gpio-controller: true
 
 required:

Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -63,6 +63,11 @@ properties:
       - riscv,sv48
       - riscv,none
 
+  riscv,cbom-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbom cache operations.
+
   riscv,isa:
     description:
       Identifies the specific RISC-V instruction set architecture

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -46,7 +46,7 @@ properties:
     const: 2
 
   cache-sets:
-    const: 1024
+    enum: [1024, 2048]
 
   cache-size:
     const: 2097152
@@ -84,6 +84,8 @@ then:
       description: |
         Must contain entries for DirError, DataError and DataFail signals.
       maxItems: 3
+    cache-sets:
+      const: 1024
 
 else:
   properties:
@@ -91,6 +93,8 @@ else:
       description: |
         Must contain entries for DirError, DataError, DataFail, DirFail signals.
       minItems: 4
+    cache-sets:
+      const: 2048
 
 additionalProperties: false
 

arch/riscv/Kconfig

@@ -113,6 +113,7 @@ config RISCV
 	select MODULES_USE_ELF_RELA if MODULES
 	select MODULE_SECTIONS if MODULES
 	select OF
+	select OF_DMA_DEFAULT_COHERENT
 	select OF_EARLY_FLATTREE
 	select OF_IRQ
 	select PCI_DOMAINS_GENERIC if PCI
@@ -218,6 +219,14 @@ config PGTABLE_LEVELS
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config RISCV_DMA_NONCOHERENT
+	bool
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SETUP_DMA_OPS
+	select DMA_DIRECT_REMAP
+
 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.erratas"
 
@@ -392,6 +401,28 @@ config RISCV_ISA_SVPBMT
 
 	   If you don't know what to do here, say Y.
 
+config CC_HAS_ZICBOM
+	bool
+	default y if 64BIT && $(cc-option,-mabi=lp64 -march=rv64ima_zicbom)
+	default y if 32BIT && $(cc-option,-mabi=ilp32 -march=rv32ima_zicbom)
+
+config RISCV_ISA_ZICBOM
+	bool "Zicbom extension support for non-coherent DMA operation"
+	depends on CC_HAS_ZICBOM
+	depends on !XIP_KERNEL && MMU
+	select RISCV_DMA_NONCOHERENT
+	select RISCV_ALTERNATIVE
+	default y
+	help
+	   Adds support to dynamically detect the presence of the ZICBOM
+	   extension (Cache Block Management Operations) and enable its
+	   usage.
+
+	   The Zicbom extension can be used to handle for example
+	   non-coherent DMA support on devices that need it.
+
+	   If you don't know what to do here, say Y.
+
 config FPU
 	bool "FPU support"
 	default y
@@ -463,7 +494,6 @@ config KEXEC_FILE
 
 config ARCH_HAS_KEXEC_PURGATORY
 	def_bool KEXEC_FILE
-	select BUILD_BIN2C
 	depends on CRYPTO=y
 	depends on CRYPTO_SHA256=y
 

arch/riscv/Kconfig.erratas

@@ -55,4 +55,15 @@ config ERRATA_THEAD_PBMT
 
 	  If you don't know what to do here, say "Y".
 
+config ERRATA_THEAD_CMO
+	bool "Apply T-Head cache management errata"
+	depends on ERRATA_THEAD
+	select RISCV_DMA_NONCOHERENT
+	default y
+	help
+	  This will apply the cache management errata to handle the
+	  non-standard handling on non-coherent operations on T-Head SoCs.
+
+	  If you don't know what to do here, say "Y".
+
 endmenu # "CPU errata selection"

arch/riscv/Makefile

@@ -56,6 +56,14 @@ riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
 toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
 riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
 
+# Check if the toolchain supports Zicbom extension
+toolchain-supports-zicbom := $(call cc-option-yn, -march=$(riscv-march-y)_zicbom)
+riscv-march-$(toolchain-supports-zicbom) := $(riscv-march-y)_zicbom
+
+# Check if the toolchain supports Zihintpause extension
+toolchain-supports-zihintpause := $(call cc-option-yn, -march=$(riscv-march-y)_zihintpause)
+riscv-march-$(toolchain-supports-zihintpause) := $(riscv-march-y)_zihintpause
+
 KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y))
 KBUILD_AFLAGS += -march=$(riscv-march-y)
 

arch/riscv/boot/dts/canaan/Makefile

@@ -1,3 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))
+dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb
-obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
+dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb
+
+obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))

arch/riscv/boot/dts/canaan/canaan_kd233.dts

@@ -127,10 +127,10 @@
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 
 	panel@0 {
-		compatible = "ilitek,ili9341";
+		compatible = "canaan,kd233-tft", "ilitek,ili9341";
 		reg = <0>;
 		dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		spi-max-frequency = <15000000>;
+		spi-max-frequency = <10000000>;
 		status = "disabled";
 	};
 };
@@ -142,7 +142,7 @@
 	cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/k210.dtsi

@@ -81,11 +81,13 @@
 
 	sram: memory@80000000 {
 		device_type = "memory";
+		reg = <0x80000000 0x400000>, /* sram0 4 MiB */
+		      <0x80400000 0x200000>, /* sram1 2 MiB */
+		      <0x80600000 0x200000>; /* aisram 2 MiB */
+	};
+
+	sram_controller: memory-controller {
 		compatible = "canaan,k210-sram";
-		reg = <0x80000000 0x400000>,
-		      <0x80400000 0x200000>,
-		      <0x80600000 0x200000>;
-		reg-names = "sram0", "sram1", "aisram";
 		clocks = <&sysclk K210_CLK_SRAM0>,
 			 <&sysclk K210_CLK_SRAM1>,
 			 <&sysclk K210_CLK_AI>;
@@ -173,7 +175,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-pm-bus";
-			ranges;
+			ranges = <0x50200000 0x50200000 0x200000>;
 			clocks = <&sysclk K210_CLK_APB0>;
 
 			gpio1: gpio@50200000 {
@@ -261,7 +263,7 @@
 			};
 
 			i2s0: i2s@50250000 {
-				compatible = "snps,designware-i2s";
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
 				reg = <0x50250000 0x200>;
 				interrupts = <5>;
 				clocks = <&sysclk K210_CLK_I2S0>;
@@ -270,7 +272,7 @@
 			};
 
 			i2s1: i2s@50260000 {
-				compatible = "snps,designware-i2s";
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
 				reg = <0x50260000 0x200>;
 				interrupts = <6>;
 				clocks = <&sysclk K210_CLK_I2S1>;
@@ -279,7 +281,7 @@
 			};
 
 			i2s2: i2s@50270000 {
-				compatible = "snps,designware-i2s";
+				compatible = "canaan,k210-i2s", "snps,designware-i2s";
 				reg = <0x50270000 0x200>;
 				interrupts = <7>;
 				clocks = <&sysclk K210_CLK_I2S2>;
@@ -329,28 +331,58 @@
 
 			timer0: timer@502d0000 {
 				compatible = "snps,dw-apb-timer";
-				reg = <0x502D0000 0x100>;
+				reg = <0x502D0000 0x14>;
-				interrupts = <14>, <15>;
+				interrupts = <14>;
 				clocks = <&sysclk K210_CLK_TIMER0>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
 				resets = <&sysrst K210_RST_TIMER0>;
 			};
 
-			timer1: timer@502e0000 {
+			timer1: timer@502d0014 {
 				compatible = "snps,dw-apb-timer";
-				reg = <0x502E0000 0x100>;
+				reg = <0x502D0014 0x14>;
-				interrupts = <16>, <17>;
+				interrupts = <15>;
+				clocks = <&sysclk K210_CLK_TIMER0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER0>;
+			};
+
+			timer2: timer@502e0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502E0000 0x14>;
+				interrupts = <16>;
 				clocks = <&sysclk K210_CLK_TIMER1>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
 				resets = <&sysrst K210_RST_TIMER1>;
 			};
 
-			timer2: timer@502f0000 {
+			timer3: timer@502e0014 {
 				compatible = "snps,dw-apb-timer";
-				reg = <0x502F0000 0x100>;
+				reg = <0x502E0014 0x114>;
-				interrupts = <18>, <19>;
+				interrupts = <17>;
+				clocks = <&sysclk K210_CLK_TIMER1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER1>;
+			};
+
+			timer4: timer@502f0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0000 0x14>;
+				interrupts = <18>;
+				clocks = <&sysclk K210_CLK_TIMER2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER2>;
+			};
+
+			timer5: timer@502f0014 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0014 0x14>;
+				interrupts = <19>;
 				clocks = <&sysclk K210_CLK_TIMER2>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -362,7 +394,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-pm-bus";
-			ranges;
+			ranges = <0x50400000 0x50400000 0x40100>;
 			clocks = <&sysclk K210_CLK_APB1>;
 
 			wdt0: watchdog@50400000 {
@@ -417,7 +449,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-pm-bus";
-			ranges;
+			ranges = <0x52000000 0x52000000 0x2000200>;
 			clocks = <&sysclk K210_CLK_APB2>;
 
 			spi0: spi@52000000 {
@@ -431,7 +463,6 @@
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI0>;
 				reset-names = "spi";
-				spi-max-frequency = <25000000>;
 				num-cs = <4>;
 				reg-io-width = <4>;
 			};
@@ -447,7 +478,6 @@
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI1>;
 				reset-names = "spi";
-				spi-max-frequency = <25000000>;
 				num-cs = <4>;
 				reg-io-width = <4>;
 			};
@@ -463,8 +493,7 @@
 				clock-names = "ssi_clk", "pclk";
 				resets = <&sysrst K210_RST_SPI3>;
 				reset-names = "spi";
-				/* Could possibly go up to 200 MHz */
+
-				spi-max-frequency = <100000000>;
 				num-cs = <4>;
 				reg-io-width = <4>;
 			};

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

@@ -189,7 +189,7 @@
 	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

@@ -191,7 +191,7 @@
 	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

@@ -199,7 +199,7 @@
 	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

@@ -164,7 +164,7 @@
 	cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	slot@0 {
+	mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		voltage-ranges = <3300 3300>;

arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts

@@ -4,6 +4,8 @@
 #include "fu740-c000.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 
 /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
 #define RTCCLK_FREQ		1000000
@@ -44,6 +46,46 @@
 		compatible = "gpio-poweroff";
 		gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-d12 {
+			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d12";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			max-brightness = <255>;
+			label = "d2";
+
+			led-red {
+				pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led-green {
+				pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led-blue {
+				pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
 };
 
 &uart0 {

arch/riscv/boot/dts/starfive/jh7100.dtsi

@@ -130,7 +130,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			riscv,ndev = <127>;
+			riscv,ndev = <133>;
 		};
 
 		clkgen: clock-controller@11800000 {

arch/riscv/errata/thead/errata.c

@@ -27,6 +27,23 @@ static bool errata_probe_pbmt(unsigned int stage,
 	return false;
 }
 
+static bool errata_probe_cmo(unsigned int stage,
+			     unsigned long arch_id, unsigned long impid)
+{
+#ifdef CONFIG_ERRATA_THEAD_CMO
+	if (arch_id != 0 || impid != 0)
+		return false;
+
+	if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
+		return false;
+
+	riscv_noncoherent_supported();
+	return true;
+#else
+	return false;
+#endif
+}
+
 static u32 thead_errata_probe(unsigned int stage,
 			      unsigned long archid, unsigned long impid)
 {
@@ -35,6 +52,9 @@ static u32 thead_errata_probe(unsigned int stage,
 	if (errata_probe_pbmt(stage, archid, impid))
 		cpu_req_errata |= (1U << ERRATA_THEAD_PBMT);
 
+	if (errata_probe_cmo(stage, archid, impid))
+		cpu_req_errata |= (1U << ERRATA_THEAD_CMO);
+
 	return cpu_req_errata;
 }
 

arch/riscv/include/asm/cache.h

@@ -11,6 +11,10 @@
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+#ifdef CONFIG_RISCV_DMA_NONCOHERENT
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+#endif
+
 /*
  * RISC-V requires the stack pointer to be 16-byte aligned, so ensure that
  * the flat loader aligns it accordingly.

arch/riscv/include/asm/cacheflush.h

@@ -42,6 +42,16 @@ void flush_icache_mm(struct mm_struct *mm, bool local);
 
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_RISCV_ISA_ZICBOM
+void riscv_init_cbom_blocksize(void);
+#else
+static inline void riscv_init_cbom_blocksize(void) { }
+#endif
+
+#ifdef CONFIG_RISCV_DMA_NONCOHERENT
+void riscv_noncoherent_supported(void);
+#endif
+
 /*
  * Bits in sys_riscv_flush_icache()'s flags argument.
  */

arch/riscv/include/asm/cpu_ops.h

@@ -38,6 +38,7 @@ struct cpu_operations {
 #endif
 };
 
+extern const struct cpu_operations cpu_ops_spinwait;
 extern const struct cpu_operations *cpu_ops[NR_CPUS];
 void __init cpu_set_ops(int cpu);
 

arch/riscv/include/asm/cpu_ops_sbi.h

@@ -10,6 +10,8 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 
+extern const struct cpu_operations cpu_ops_sbi;
+
 /**
  * struct sbi_hart_boot_data - Hart specific boot used during booting and
  *			       cpu hotplug.

arch/riscv/include/asm/csr.h

@@ -247,6 +247,9 @@
 #define CSR_SIP			0x144
 #define CSR_SATP		0x180
 
+#define CSR_STIMECMP		0x14D
+#define CSR_STIMECMPH		0x15D
+
 #define CSR_VSSTATUS		0x200
 #define CSR_VSIE		0x204
 #define CSR_VSTVEC		0x205
@@ -256,6 +259,8 @@
 #define CSR_VSTVAL		0x243
 #define CSR_VSIP		0x244
 #define CSR_VSATP		0x280
+#define CSR_VSTIMECMP		0x24D
+#define CSR_VSTIMECMPH		0x25D
 
 #define CSR_HSTATUS		0x600
 #define CSR_HEDELEG		0x602

arch/riscv/include/asm/errata_list.h

@@ -16,11 +16,13 @@
 
 #ifdef CONFIG_ERRATA_THEAD
 #define	ERRATA_THEAD_PBMT 0
-#define	ERRATA_THEAD_NUMBER 1
+#define	ERRATA_THEAD_CMO 1
+#define	ERRATA_THEAD_NUMBER 2
 #endif
 
 #define	CPUFEATURE_SVPBMT 0
-#define	CPUFEATURE_NUMBER 1
+#define	CPUFEATURE_ZICBOM 1
+#define	CPUFEATURE_NUMBER 2
 
 #ifdef __ASSEMBLY__
 
@@ -87,6 +89,59 @@ asm volatile(ALTERNATIVE(						\
 #define ALT_THEAD_PMA(_val)
 #endif
 
+/*
+ * dcache.ipa rs1 (invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01010      rs1       000      00000  0001011
+ * dache.iva rs1 (invalida, virtual address)
+ *   0000001    00110      rs1       000      00000  0001011
+ *
+ * dcache.cpa rs1 (clean, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01001      rs1       000      00000  0001011
+ * dcache.cva rs1 (clean, virtual address)
+ *   0000001    00100      rs1       000      00000  0001011
+ *
+ * dcache.cipa rs1 (clean then invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01011      rs1       000      00000  0001011
+ * dcache.civa rs1 (... virtual address)
+ *   0000001    00111      rs1       000      00000  0001011
+ *
+ * sync.s (make sure all cache operations finished)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000000    11001     00000      000      00000  0001011
+ */
+#define THEAD_inval_A0	".long 0x0265000b"
+#define THEAD_clean_A0	".long 0x0245000b"
+#define THEAD_flush_A0	".long 0x0275000b"
+#define THEAD_SYNC_S	".long 0x0190000b"
+
+#define ALT_CMO_OP(_op, _start, _size, _cachesize)			\
+asm volatile(ALTERNATIVE_2(						\
+	__nops(6),							\
+	"mv a0, %1\n\t"							\
+	"j 2f\n\t"							\
+	"3:\n\t"							\
+	"cbo." __stringify(_op) " (a0)\n\t"				\
+	"add a0, a0, %0\n\t"						\
+	"2:\n\t"							\
+	"bltu a0, %2, 3b\n\t"						\
+	"nop", 0, CPUFEATURE_ZICBOM, CONFIG_RISCV_ISA_ZICBOM,		\
+	"mv a0, %1\n\t"							\
+	"j 2f\n\t"							\
+	"3:\n\t"							\
+	THEAD_##_op##_A0 "\n\t"						\
+	"add a0, a0, %0\n\t"						\
+	"2:\n\t"							\
+	"bltu a0, %2, 3b\n\t"						\
+	THEAD_SYNC_S, THEAD_VENDOR_ID,					\
+			ERRATA_THEAD_CMO, CONFIG_ERRATA_THEAD_CMO)	\
+	: : "r"(_cachesize),						\
+	    "r"((unsigned long)(_start) & ~((_cachesize) - 1UL)),	\
+	    "r"((unsigned long)(_start) + (_size))			\
+	: "a0")
+
 #endif /* __ASSEMBLY__ */
 
 #endif

arch/riscv/include/asm/hwcap.h

@@ -8,6 +8,7 @@
 #ifndef _ASM_RISCV_HWCAP_H
 #define _ASM_RISCV_HWCAP_H
 
+#include <asm/errno.h>
 #include <linux/bits.h>
 #include <uapi/asm/hwcap.h>
 
@@ -54,6 +55,9 @@ extern unsigned long elf_hwcap;
 enum riscv_isa_ext_id {
 	RISCV_ISA_EXT_SSCOFPMF = RISCV_ISA_EXT_BASE,
 	RISCV_ISA_EXT_SVPBMT,
+	RISCV_ISA_EXT_ZICBOM,
+	RISCV_ISA_EXT_ZIHINTPAUSE,
+	RISCV_ISA_EXT_SSTC,
 	RISCV_ISA_EXT_ID_MAX = RISCV_ISA_EXT_MAX,
 };
 
@@ -64,6 +68,7 @@ enum riscv_isa_ext_id {
  */
 enum riscv_isa_ext_key {
 	RISCV_ISA_EXT_KEY_FPU,		/* For 'F' and 'D' */
+	RISCV_ISA_EXT_KEY_ZIHINTPAUSE,
 	RISCV_ISA_EXT_KEY_MAX,
 };
 
@@ -83,6 +88,8 @@ static __always_inline int riscv_isa_ext2key(int num)
 		return RISCV_ISA_EXT_KEY_FPU;
 	case RISCV_ISA_EXT_d:
 		return RISCV_ISA_EXT_KEY_FPU;
+	case RISCV_ISA_EXT_ZIHINTPAUSE:
+		return RISCV_ISA_EXT_KEY_ZIHINTPAUSE;
 	default:
 		return -EINVAL;
 	}

arch/riscv/include/asm/kvm_vcpu_timer.h

@@ -28,6 +28,11 @@ struct kvm_vcpu_timer {
 	u64 next_cycles;
 	/* Underlying hrtimer instance */
 	struct hrtimer hrt;
+
+	/* Flag to check if sstc is enabled or not */
+	bool sstc_enabled;
+	/* A function pointer to switch between stimecmp or hrtimer at runtime */
+	int (*timer_next_event)(struct kvm_vcpu *vcpu, u64 ncycles);
 };
 
 int kvm_riscv_vcpu_timer_next_event(struct kvm_vcpu *vcpu, u64 ncycles);
@@ -40,5 +45,7 @@ int kvm_riscv_vcpu_timer_deinit(struct kvm_vcpu *vcpu);
 int kvm_riscv_vcpu_timer_reset(struct kvm_vcpu *vcpu);
 void kvm_riscv_vcpu_timer_restore(struct kvm_vcpu *vcpu);
 void kvm_riscv_guest_timer_init(struct kvm *kvm);
+void kvm_riscv_vcpu_timer_save(struct kvm_vcpu *vcpu);
+bool kvm_riscv_vcpu_timer_pending(struct kvm_vcpu *vcpu);
 
 #endif

arch/riscv/include/asm/sbi.h

@@ -122,7 +122,21 @@ enum sbi_ext_pmu_fid {
 	SBI_EXT_PMU_COUNTER_FW_READ,
 };
 
-#define RISCV_PMU_RAW_EVENT_MASK GENMASK_ULL(55, 0)
+union sbi_pmu_ctr_info {
+	unsigned long value;
+	struct {
+		unsigned long csr:12;
+		unsigned long width:6;
+#if __riscv_xlen == 32
+		unsigned long reserved:13;
+#else
+		unsigned long reserved:45;
+#endif
+		unsigned long type:1;
+	};
+};
+
+#define RISCV_PMU_RAW_EVENT_MASK GENMASK_ULL(47, 0)
 #define RISCV_PMU_RAW_EVENT_IDX 0x20000
 
 /** General pmu event codes specified in SBI PMU extension */
@@ -189,12 +203,26 @@ enum sbi_pmu_ctr_type {
 	SBI_PMU_CTR_TYPE_FW,
 };
 
+/* Helper macros to decode event idx */
+#define SBI_PMU_EVENT_IDX_OFFSET 20
+#define SBI_PMU_EVENT_IDX_MASK 0xFFFFF
+#define SBI_PMU_EVENT_IDX_CODE_MASK 0xFFFF
+#define SBI_PMU_EVENT_IDX_TYPE_MASK 0xF0000
+#define SBI_PMU_EVENT_RAW_IDX 0x20000
+#define SBI_PMU_FIXED_CTR_MASK 0x07
+
+#define SBI_PMU_EVENT_CACHE_ID_CODE_MASK 0xFFF8
+#define SBI_PMU_EVENT_CACHE_OP_ID_CODE_MASK 0x06
+#define SBI_PMU_EVENT_CACHE_RESULT_ID_CODE_MASK 0x01
+
+#define SBI_PMU_EVENT_IDX_INVALID 0xFFFFFFFF
+
 /* Flags defined for config matching function */
 #define SBI_PMU_CFG_FLAG_SKIP_MATCH	(1 << 0)
 #define SBI_PMU_CFG_FLAG_CLEAR_VALUE	(1 << 1)
 #define SBI_PMU_CFG_FLAG_AUTO_START	(1 << 2)
 #define SBI_PMU_CFG_FLAG_SET_VUINH	(1 << 3)
-#define SBI_PMU_CFG_FLAG_SET_VSNH	(1 << 4)
+#define SBI_PMU_CFG_FLAG_SET_VSINH	(1 << 4)
 #define SBI_PMU_CFG_FLAG_SET_UINH	(1 << 5)
 #define SBI_PMU_CFG_FLAG_SET_SINH	(1 << 6)
 #define SBI_PMU_CFG_FLAG_SET_MINH	(1 << 7)

arch/riscv/include/asm/vdso/processor.h

@@ -4,15 +4,30 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/jump_label.h>
 #include <asm/barrier.h>
+#include <asm/hwcap.h>
 
 static inline void cpu_relax(void)
 {
+	if (!static_branch_likely(&riscv_isa_ext_keys[RISCV_ISA_EXT_KEY_ZIHINTPAUSE])) {
 #ifdef __riscv_muldiv
 		int dummy;
 		/* In lieu of a halt instruction, induce a long-latency stall. */
 		__asm__ __volatile__ ("div %0, %0, zero" : "=r" (dummy));
 #endif
+	} else {
+		/*
+		 * Reduce instruction retirement.
+		 * This assumes the PC changes.
+		 */
+#ifdef __riscv_zihintpause
+		__asm__ __volatile__ ("pause");
+#else
+		/* Encoding of the pause instruction */
+		__asm__ __volatile__ (".4byte 0x100000F");
+#endif
+	}
 	barrier();
 }
 

arch/riscv/include/uapi/asm/kvm.h

@@ -97,6 +97,7 @@ enum KVM_RISCV_ISA_EXT_ID {
 	KVM_RISCV_ISA_EXT_I,
 	KVM_RISCV_ISA_EXT_M,
 	KVM_RISCV_ISA_EXT_SVPBMT,
+	KVM_RISCV_ISA_EXT_SSTC,
 	KVM_RISCV_ISA_EXT_MAX,
 };
 

arch/riscv/kernel/cpu.c

@@ -93,6 +93,9 @@ int riscv_of_parent_hartid(struct device_node *node, unsigned long *hartid)
 static struct riscv_isa_ext_data isa_ext_arr[] = {
 	__RISCV_ISA_EXT_DATA(sscofpmf, RISCV_ISA_EXT_SSCOFPMF),
 	__RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT),
+	__RISCV_ISA_EXT_DATA(zicbom, RISCV_ISA_EXT_ZICBOM),
+	__RISCV_ISA_EXT_DATA(zihintpause, RISCV_ISA_EXT_ZIHINTPAUSE),
+	__RISCV_ISA_EXT_DATA(sstc, RISCV_ISA_EXT_SSTC),
 	__RISCV_ISA_EXT_DATA("", RISCV_ISA_EXT_MAX),
 };
 

arch/riscv/kernel/cpu_ops.c

@@ -9,15 +9,14 @@
 #include <linux/string.h>
 #include <linux/sched.h>
 #include <asm/cpu_ops.h>
+#include <asm/cpu_ops_sbi.h>
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
 const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
 
 extern const struct cpu_operations cpu_ops_sbi;
-#ifdef CONFIG_RISCV_BOOT_SPINWAIT
+#ifndef CONFIG_RISCV_BOOT_SPINWAIT
-extern const struct cpu_operations cpu_ops_spinwait;
-#else
 const struct cpu_operations cpu_ops_spinwait = {
 	.name		= "",
 	.cpu_prepare	= NULL,

arch/riscv/kernel/cpu_ops_spinwait.c

@@ -11,6 +11,8 @@
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
+#include "head.h"
+
 const struct cpu_operations cpu_ops_spinwait;
 void *__cpu_spinwait_stack_pointer[NR_CPUS] __section(".data");
 void *__cpu_spinwait_task_pointer[NR_CPUS] __section(".data");

arch/riscv/kernel/cpufeature.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <asm/alternative.h>
+#include <asm/cacheflush.h>
 #include <asm/errata_list.h>
 #include <asm/hwcap.h>
 #include <asm/patch.h>
@@ -200,6 +201,9 @@ void __init riscv_fill_hwcap(void)
 			} else {
 				SET_ISA_EXT_MAP("sscofpmf", RISCV_ISA_EXT_SSCOFPMF);
 				SET_ISA_EXT_MAP("svpbmt", RISCV_ISA_EXT_SVPBMT);
+				SET_ISA_EXT_MAP("zicbom", RISCV_ISA_EXT_ZICBOM);
+				SET_ISA_EXT_MAP("zihintpause", RISCV_ISA_EXT_ZIHINTPAUSE);
+				SET_ISA_EXT_MAP("sstc", RISCV_ISA_EXT_SSTC);
 			}
 #undef SET_ISA_EXT_MAP
 		}
@@ -261,6 +265,25 @@ static bool __init_or_module cpufeature_probe_svpbmt(unsigned int stage)
 	return false;
 }
 
+static bool __init_or_module cpufeature_probe_zicbom(unsigned int stage)
+{
+#ifdef CONFIG_RISCV_ISA_ZICBOM
+	switch (stage) {
+	case RISCV_ALTERNATIVES_EARLY_BOOT:
+		return false;
+	default:
+		if (riscv_isa_extension_available(NULL, ZICBOM)) {
+			riscv_noncoherent_supported();
+			return true;
+		} else {
+			return false;
+		}
+	}
+#endif
+
+	return false;
+}
+
 /*
  * Probe presence of individual extensions.
  *
@@ -275,6 +298,9 @@ static u32 __init_or_module cpufeature_probe(unsigned int stage)
 	if (cpufeature_probe_svpbmt(stage))
 		cpu_req_feature |= (1U << CPUFEATURE_SVPBMT);
 
+	if (cpufeature_probe_zicbom(stage))
+		cpu_req_feature |= (1U << CPUFEATURE_ZICBOM);
+
 	return cpu_req_feature;
 }
 

arch/riscv/kernel/crash_save_regs.S

@@ -44,7 +44,7 @@ SYM_CODE_START(riscv_crash_save_regs)
 	REG_S t6,  PT_T6(a0)	/* x31 */
 
 	csrr t1, CSR_STATUS
-	csrr t2, CSR_EPC
+	auipc t2, 0x0
 	csrr t3, CSR_TVAL
 	csrr t4, CSR_CAUSE
 

arch/riscv/kernel/machine_kexec.c

@@ -138,19 +138,37 @@ void machine_shutdown(void)
 #endif
 }
 
+/* Override the weak function in kernel/panic.c */
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+
+	/*
+	 * This function can be called twice in panic path, but obviously
+	 * we execute this only once.
+	 */
+	if (cpus_stopped)
+		return;
+
+	smp_send_stop();
+	cpus_stopped = 1;
+}
+
 /*
  * machine_crash_shutdown - Prepare to kexec after a kernel crash
  *
  * This function is called by crash_kexec just before machine_kexec
- * below and its goal is similar to machine_shutdown, but in case of
+ * and its goal is to shutdown non-crashing cpus and save registers.
- * a kernel crash. Since we don't handle such cases yet, this function
- * is empty.
  */
 void
 machine_crash_shutdown(struct pt_regs *regs)
 {
+	local_irq_disable();
+
+	/* shutdown non-crashing cpus */
+	crash_smp_send_stop();
+
 	crash_save_cpu(regs, smp_processor_id());
-	machine_shutdown();
 	pr_info("Starting crashdump kernel...\n");
 }
 
@@ -171,7 +189,7 @@ machine_kexec(struct kimage *image)
 	struct kimage_arch *internal = &image->arch;
 	unsigned long jump_addr = (unsigned long) image->start;
 	unsigned long first_ind_entry = (unsigned long) &image->head;
-	unsigned long this_cpu_id = smp_processor_id();
+	unsigned long this_cpu_id = __smp_processor_id();
 	unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
 	unsigned long fdt_addr = internal->fdt_addr;
 	void *control_code_buffer = page_address(image->control_code_page);

arch/riscv/kernel/probes/uprobes.c

@@ -59,8 +59,6 @@ int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 
 	instruction_pointer_set(regs, utask->xol_vaddr);
 
-	regs->status &= ~SR_SPIE;
-
 	return 0;
 }
 
@@ -72,8 +70,6 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 
 	instruction_pointer_set(regs, utask->vaddr + auprobe->insn_size);
 
-	regs->status |= SR_SPIE;
-
 	return 0;
 }
 
@@ -111,8 +107,6 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	 * address.
 	 */
 	instruction_pointer_set(regs, utask->vaddr);
-
-	regs->status &= ~SR_SPIE;
 }
 
 bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,

arch/riscv/kernel/setup.c

@@ -22,6 +22,7 @@
 #include <linux/crash_dump.h>
 
 #include <asm/alternative.h>
+#include <asm/cacheflush.h>
 #include <asm/cpu_ops.h>
 #include <asm/early_ioremap.h>
 #include <asm/pgtable.h>
@@ -296,6 +297,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	riscv_fill_hwcap();
+	riscv_init_cbom_blocksize();
 	apply_boot_alternatives();
 }
 

arch/riscv/kernel/traps_misaligned.c

@@ -7,6 +7,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/irq.h>
+#include <linux/stringify.h>
 
 #include <asm/processor.h>
 #include <asm/ptrace.h>
@@ -150,9 +151,6 @@
 #define PRECISION_S 0
 #define PRECISION_D 1
 
-#define STR(x) XSTR(x)
-#define XSTR(x) #x
-
 #define DECLARE_UNPRIVILEGED_LOAD_FUNCTION(type, insn)			\
 static inline type load_##type(const type *addr)			\
 {									\
@@ -207,9 +205,9 @@ static inline ulong get_insn(ulong mepc)
 	asm ("and %[tmp], %[addr], 2\n"
 		"bnez %[tmp], 1f\n"
 #if defined(CONFIG_64BIT)
-		STR(LWU) " %[insn], (%[addr])\n"
+		__stringify(LWU) " %[insn], (%[addr])\n"
 #else
-		STR(LW) " %[insn], (%[addr])\n"
+		__stringify(LW) " %[insn], (%[addr])\n"
 #endif
 		"and %[tmp], %[insn], %[rvc_mask]\n"
 		"beq %[tmp], %[rvc_mask], 2f\n"

arch/riscv/kvm/vcpu.c

@@ -52,6 +52,7 @@ static const unsigned long kvm_isa_ext_arr[] = {
 	RISCV_ISA_EXT_i,
 	RISCV_ISA_EXT_m,
 	RISCV_ISA_EXT_SVPBMT,
+	RISCV_ISA_EXT_SSTC,
 };
 
 static unsigned long kvm_riscv_vcpu_base2isa_ext(unsigned long base_ext)
@@ -85,6 +86,7 @@ static bool kvm_riscv_vcpu_isa_disable_allowed(unsigned long ext)
 	case KVM_RISCV_ISA_EXT_C:
 	case KVM_RISCV_ISA_EXT_I:
 	case KVM_RISCV_ISA_EXT_M:
+	case KVM_RISCV_ISA_EXT_SSTC:
 		return false;
 	default:
 		break;
@@ -203,7 +205,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	return kvm_riscv_vcpu_has_interrupts(vcpu, 1UL << IRQ_VS_TIMER);
+	return kvm_riscv_vcpu_timer_pending(vcpu);
 }
 
 void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
@@ -785,6 +787,8 @@ static void kvm_riscv_vcpu_update_config(const unsigned long *isa)
 	if (__riscv_isa_extension_available(isa, RISCV_ISA_EXT_SVPBMT))
 		henvcfg |= ENVCFG_PBMTE;
 
+	if (__riscv_isa_extension_available(isa, RISCV_ISA_EXT_SSTC))
+		henvcfg |= ENVCFG_STCE;
 	csr_write(CSR_HENVCFG, henvcfg);
 #ifdef CONFIG_32BIT
 	csr_write(CSR_HENVCFGH, henvcfg >> 32);
@@ -828,6 +832,8 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 				     vcpu->arch.isa);
 	kvm_riscv_vcpu_host_fp_restore(&vcpu->arch.host_context);
 
+	kvm_riscv_vcpu_timer_save(vcpu);
+
 	csr->vsstatus = csr_read(CSR_VSSTATUS);
 	csr->vsie = csr_read(CSR_VSIE);
 	csr->vstvec = csr_read(CSR_VSTVEC);

arch/riscv/kvm/vcpu_timer.c

@@ -69,7 +69,18 @@ static int kvm_riscv_vcpu_timer_cancel(struct kvm_vcpu_timer *t)
 	return 0;
 }
 
-int kvm_riscv_vcpu_timer_next_event(struct kvm_vcpu *vcpu, u64 ncycles)
+static int kvm_riscv_vcpu_update_vstimecmp(struct kvm_vcpu *vcpu, u64 ncycles)
+{
+#if defined(CONFIG_32BIT)
+		csr_write(CSR_VSTIMECMP, ncycles & 0xFFFFFFFF);
+		csr_write(CSR_VSTIMECMPH, ncycles >> 32);
+#else
+		csr_write(CSR_VSTIMECMP, ncycles);
+#endif
+		return 0;
+}
+
+static int kvm_riscv_vcpu_update_hrtimer(struct kvm_vcpu *vcpu, u64 ncycles)
 {
 	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
 	struct kvm_guest_timer *gt = &vcpu->kvm->arch.timer;
@@ -88,6 +99,65 @@ int kvm_riscv_vcpu_timer_next_event(struct kvm_vcpu *vcpu, u64 ncycles)
 	return 0;
 }
 
+int kvm_riscv_vcpu_timer_next_event(struct kvm_vcpu *vcpu, u64 ncycles)
+{
+	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
+
+	return t->timer_next_event(vcpu, ncycles);
+}
+
+static enum hrtimer_restart kvm_riscv_vcpu_vstimer_expired(struct hrtimer *h)
+{
+	u64 delta_ns;
+	struct kvm_vcpu_timer *t = container_of(h, struct kvm_vcpu_timer, hrt);
+	struct kvm_vcpu *vcpu = container_of(t, struct kvm_vcpu, arch.timer);
+	struct kvm_guest_timer *gt = &vcpu->kvm->arch.timer;
+
+	if (kvm_riscv_current_cycles(gt) < t->next_cycles) {
+		delta_ns = kvm_riscv_delta_cycles2ns(t->next_cycles, gt, t);
+		hrtimer_forward_now(&t->hrt, ktime_set(0, delta_ns));
+		return HRTIMER_RESTART;
+	}
+
+	t->next_set = false;
+	kvm_vcpu_kick(vcpu);
+
+	return HRTIMER_NORESTART;
+}
+
+bool kvm_riscv_vcpu_timer_pending(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
+	struct kvm_guest_timer *gt = &vcpu->kvm->arch.timer;
+
+	if (!kvm_riscv_delta_cycles2ns(t->next_cycles, gt, t) ||
+	    kvm_riscv_vcpu_has_interrupts(vcpu, 1UL << IRQ_VS_TIMER))
+		return true;
+	else
+		return false;
+}
+
+static void kvm_riscv_vcpu_timer_blocking(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
+	struct kvm_guest_timer *gt = &vcpu->kvm->arch.timer;
+	u64 delta_ns;
+
+	if (!t->init_done)
+		return;
+
+	delta_ns = kvm_riscv_delta_cycles2ns(t->next_cycles, gt, t);
+	if (delta_ns) {
+		hrtimer_start(&t->hrt, ktime_set(0, delta_ns), HRTIMER_MODE_REL);
+		t->next_set = true;
+	}
+}
+
+static void kvm_riscv_vcpu_timer_unblocking(struct kvm_vcpu *vcpu)
+{
+	kvm_riscv_vcpu_timer_cancel(&vcpu->arch.timer);
+}
+
 int kvm_riscv_vcpu_get_reg_timer(struct kvm_vcpu *vcpu,
 				 const struct kvm_one_reg *reg)
 {
@@ -180,10 +250,20 @@ int kvm_riscv_vcpu_timer_init(struct kvm_vcpu *vcpu)
 		return -EINVAL;
 
 	hrtimer_init(&t->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	t->hrt.function = kvm_riscv_vcpu_hrtimer_expired;
 	t->init_done = true;
 	t->next_set = false;
 
+	/* Enable sstc for every vcpu if available in hardware */
+	if (riscv_isa_extension_available(NULL, SSTC)) {
+		t->sstc_enabled = true;
+		t->hrt.function = kvm_riscv_vcpu_vstimer_expired;
+		t->timer_next_event = kvm_riscv_vcpu_update_vstimecmp;
+	} else {
+		t->sstc_enabled = false;
+		t->hrt.function = kvm_riscv_vcpu_hrtimer_expired;
+		t->timer_next_event = kvm_riscv_vcpu_update_hrtimer;
+	}
+
 	return 0;
 }
 
@@ -199,19 +279,71 @@ int kvm_riscv_vcpu_timer_deinit(struct kvm_vcpu *vcpu)
 
 int kvm_riscv_vcpu_timer_reset(struct kvm_vcpu *vcpu)
 {
+	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
+
+	t->next_cycles = -1ULL;
 	return kvm_riscv_vcpu_timer_cancel(&vcpu->arch.timer);
 }
 
+static void kvm_riscv_vcpu_update_timedelta(struct kvm_vcpu *vcpu)
+{
+	struct kvm_guest_timer *gt = &vcpu->kvm->arch.timer;
+
+#if defined(CONFIG_32BIT)
+	csr_write(CSR_HTIMEDELTA, (u32)(gt->time_delta));
+	csr_write(CSR_HTIMEDELTAH, (u32)(gt->time_delta >> 32));
+#else
+	csr_write(CSR_HTIMEDELTA, gt->time_delta);
+#endif
+}
+
 void kvm_riscv_vcpu_timer_restore(struct kvm_vcpu *vcpu)
 {
-	struct kvm_guest_timer *gt = &vcpu->kvm->arch.timer;
+	struct kvm_vcpu_csr *csr;
+	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
 
-#ifdef CONFIG_64BIT
+	kvm_riscv_vcpu_update_timedelta(vcpu);
-	csr_write(CSR_HTIMEDELTA, gt->time_delta);
+
+	if (!t->sstc_enabled)
+		return;
+
+	csr = &vcpu->arch.guest_csr;
+#if defined(CONFIG_32BIT)
+	csr_write(CSR_VSTIMECMP, (u32)t->next_cycles);
+	csr_write(CSR_VSTIMECMPH, (u32)(t->next_cycles >> 32));
 #else
-	csr_write(CSR_HTIMEDELTA, (u32)(gt->time_delta));
+	csr_write(CSR_VSTIMECMP, t->next_cycles);
-	csr_write(CSR_HTIMEDELTAH, (u32)(gt->time_delta >> 32));
 #endif
+
+	/* timer should be enabled for the remaining operations */
+	if (unlikely(!t->init_done))
+		return;
+
+	kvm_riscv_vcpu_timer_unblocking(vcpu);
+}
+
+void kvm_riscv_vcpu_timer_save(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_csr *csr;
+	struct kvm_vcpu_timer *t = &vcpu->arch.timer;
+
+	if (!t->sstc_enabled)
+		return;
+
+	csr = &vcpu->arch.guest_csr;
+	t = &vcpu->arch.timer;
+#if defined(CONFIG_32BIT)
+	t->next_cycles = csr_read(CSR_VSTIMECMP);
+	t->next_cycles |= (u64)csr_read(CSR_VSTIMECMPH) << 32;
+#else
+	t->next_cycles = csr_read(CSR_VSTIMECMP);
+#endif
+	/* timer should be enabled for the remaining operations */
+	if (unlikely(!t->init_done))
+		return;
+
+	if (kvm_vcpu_is_blocking(vcpu))
+		kvm_riscv_vcpu_timer_blocking(vcpu);
 }
 
 void kvm_riscv_guest_timer_init(struct kvm *kvm)

arch/riscv/lib/uaccess.S

@@ -175,7 +175,7 @@ ENTRY(__asm_copy_from_user)
 	/* Exception fixup code */
 10:
 	/* Disable access to user memory */
-	csrs CSR_STATUS, t6
+	csrc CSR_STATUS, t6
 	mv a0, t5
 	ret
 ENDPROC(__asm_copy_to_user)
@@ -227,7 +227,7 @@ ENTRY(__clear_user)
 	/* Exception fixup code */
 11:
 	/* Disable access to user memory */
-	csrs CSR_STATUS, t6
+	csrc CSR_STATUS, t6
 	mv a0, a1
 	ret
 ENDPROC(__clear_user)

arch/riscv/mm/Makefile

@@ -30,3 +30,4 @@ endif
 endif
 
 obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
+obj-$(CONFIG_RISCV_DMA_NONCOHERENT) += dma-noncoherent.o

arch/riscv/mm/dma-noncoherent.c

@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * RISC-V specific functions to support DMA for non-coherent devices
+ *
+ * Copyright (c) 2021 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/dma-direct.h>
+#include <linux/dma-map-ops.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <asm/cacheflush.h>
+
+static unsigned int riscv_cbom_block_size = L1_CACHE_BYTES;
+static bool noncoherent_supported;
+
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+			      enum dma_data_direction dir)
+{
+	void *vaddr = phys_to_virt(paddr);
+
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
+		break;
+	case DMA_FROM_DEVICE:
+		ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
+		break;
+	case DMA_BIDIRECTIONAL:
+		ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
+		break;
+	default:
+		break;
+	}
+}
+
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+			   enum dma_data_direction dir)
+{
+	void *vaddr = phys_to_virt(paddr);
+
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		break;
+	case DMA_FROM_DEVICE:
+	case DMA_BIDIRECTIONAL:
+		ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
+		break;
+	default:
+		break;
+	}
+}
+
+void arch_dma_prep_coherent(struct page *page, size_t size)
+{
+	void *flush_addr = page_address(page);
+
+	ALT_CMO_OP(flush, flush_addr, size, riscv_cbom_block_size);
+}
+
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+		const struct iommu_ops *iommu, bool coherent)
+{
+	WARN_TAINT(!coherent && riscv_cbom_block_size > ARCH_DMA_MINALIGN,
+		   TAINT_CPU_OUT_OF_SPEC,
+		   "%s %s: ARCH_DMA_MINALIGN smaller than riscv,cbom-block-size (%d < %d)",
+		   dev_driver_string(dev), dev_name(dev),
+		   ARCH_DMA_MINALIGN, riscv_cbom_block_size);
+
+	WARN_TAINT(!coherent && !noncoherent_supported, TAINT_CPU_OUT_OF_SPEC,
+		   "%s %s: device non-coherent but no non-coherent operations supported",
+		   dev_driver_string(dev), dev_name(dev));
+
+	dev->dma_coherent = coherent;
+}
+
+#ifdef CONFIG_RISCV_ISA_ZICBOM
+void riscv_init_cbom_blocksize(void)
+{
+	struct device_node *node;
+	int ret;
+	u32 val;
+
+	for_each_of_cpu_node(node) {
+		unsigned long hartid;
+		int cbom_hartid;
+
+		ret = riscv_of_processor_hartid(node, &hartid);
+		if (ret)
+			continue;
+
+		if (hartid < 0)
+			continue;
+
+		/* set block-size for cbom extension if available */
+		ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
+		if (ret)
+			continue;
+
+		if (!riscv_cbom_block_size) {
+			riscv_cbom_block_size = val;
+			cbom_hartid = hartid;
+		} else {
+			if (riscv_cbom_block_size != val)
+				pr_warn("cbom-block-size mismatched between harts %d and %lu\n",
+					cbom_hartid, hartid);
+		}
+	}
+}
+#endif
+
+void riscv_noncoherent_supported(void)
+{
+	noncoherent_supported = true;
+}

arch/riscv/mm/init.c

@@ -135,6 +135,10 @@ static void __init print_vm_layout(void)
 		(unsigned long)VMEMMAP_END);
 	print_ml("vmalloc", (unsigned long)VMALLOC_START,
 		(unsigned long)VMALLOC_END);
+#ifdef CONFIG_64BIT
+	print_ml("modules", (unsigned long)MODULES_VADDR,
+		(unsigned long)MODULES_END);
+#endif
 	print_ml("lowmem", (unsigned long)PAGE_OFFSET,
 		(unsigned long)high_memory);
 	if (IS_ENABLED(CONFIG_64BIT)) {

arch/riscv/purgatory/.gitignore

@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 purgatory.chk
 purgatory.ro
-kexec-purgatory.c

arch/riscv/purgatory/Makefile

@@ -84,12 +84,6 @@ $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE
 $(obj)/purgatory.chk: $(obj)/purgatory.ro FORCE
 		$(call if_changed,ld)
 
-targets += kexec-purgatory.c
+$(obj)/kexec-purgatory.o: $(obj)/purgatory.ro $(obj)/purgatory.chk
 
-quiet_cmd_bin2c = BIN2C   $@
+obj-y += kexec-purgatory.o
-      cmd_bin2c = $(objtree)/scripts/bin2c kexec_purgatory < $< > $@
-
-$(obj)/kexec-purgatory.c: $(obj)/purgatory.ro $(obj)/purgatory.chk FORCE
-	$(call if_changed,bin2c)
-
-obj-$(CONFIG_ARCH_HAS_KEXEC_PURGATORY)	+= kexec-purgatory.o

arch/riscv/purgatory/kexec-purgatory.S

@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+	.section .rodata, "a"
+
+	.align	8
+kexec_purgatory:
+	.globl	kexec_purgatory
+	.incbin	"arch/riscv/purgatory/purgatory.ro"
+.Lkexec_purgatroy_end:
+
+	.align	8
+kexec_purgatory_size:
+	.globl	kexec_purgatory_size
+	.quad	.Lkexec_purgatroy_end - kexec_purgatory

drivers/clocksource/timer-riscv.c

@@ -7,6 +7,9 @@
  * either be read from the "time" and "timeh" CSRs, and can use the SBI to
  * setup events, or directly accessed using MMIO registers.
  */
+
+#define pr_fmt(fmt) "riscv-timer: " fmt
+
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cpu.h>
@@ -20,14 +23,28 @@
 #include <linux/of_irq.h>
 #include <clocksource/timer-riscv.h>
 #include <asm/smp.h>
+#include <asm/hwcap.h>
 #include <asm/sbi.h>
 #include <asm/timex.h>
 
+static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available);
+
 static int riscv_clock_next_event(unsigned long delta,
 		struct clock_event_device *ce)
 {
+	u64 next_tval = get_cycles64() + delta;
+
 	csr_set(CSR_IE, IE_TIE);
-	sbi_set_timer(get_cycles64() + delta);
+	if (static_branch_likely(&riscv_sstc_available)) {
+#if defined(CONFIG_32BIT)
+		csr_write(CSR_STIMECMP, next_tval & 0xFFFFFFFF);
+		csr_write(CSR_STIMECMPH, next_tval >> 32);
+#else
+		csr_write(CSR_STIMECMP, next_tval);
+#endif
+	} else
+		sbi_set_timer(next_tval);
+
 	return 0;
 }
 
@@ -166,6 +183,12 @@ static int __init riscv_timer_init_dt(struct device_node *n)
 	if (error)
 		pr_err("cpu hp setup state failed for RISCV timer [%d]\n",
 		       error);
+
+	if (riscv_isa_extension_available(NULL, SSTC)) {
+		pr_info("Timer interrupt in S-mode is available via sstc extension\n");
+		static_branch_enable(&riscv_sstc_available);
+	}
+
 	return error;
 }
 

drivers/of/address.c

@@ -1045,26 +1045,29 @@ phys_addr_t __init of_dma_get_max_cpu_address(struct device_node *np)
  *
  * It returns true if "dma-coherent" property was found
  * for this device in the DT, or if DMA is coherent by
- * default for OF devices on the current platform.
+ * default for OF devices on the current platform and no
+ * "dma-noncoherent" property was found for this device.
  */
 bool of_dma_is_coherent(struct device_node *np)
 {
 	struct device_node *node;
-
+	bool is_coherent = IS_ENABLED(CONFIG_OF_DMA_DEFAULT_COHERENT);
-	if (IS_ENABLED(CONFIG_OF_DMA_DEFAULT_COHERENT))
-		return true;
 
 	node = of_node_get(np);
 
 	while (node) {
 		if (of_property_read_bool(node, "dma-coherent")) {
-			of_node_put(node);
+			is_coherent = true;
-			return true;
+			break;
+		}
+		if (of_property_read_bool(node, "dma-noncoherent")) {
+			is_coherent = false;
+			break;
 		}
 		node = of_get_next_dma_parent(node);
 	}
 	of_node_put(node);
-	return false;
+	return is_coherent;
 }
 EXPORT_SYMBOL_GPL(of_dma_is_coherent);
 

drivers/perf/riscv_pmu.c

@@ -170,7 +170,6 @@ int riscv_pmu_event_set_period(struct perf_event *event)
 		left = (max_period >> 1);
 
 	local64_set(&hwc->prev_count, (u64)-left);
-	perf_event_update_userpage(event);
 
 	return overflow;
 }

drivers/perf/riscv_pmu_sbi.c

@@ -41,20 +41,6 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
 	NULL,
 };
 
-union sbi_pmu_ctr_info {
-	unsigned long value;
-	struct {
-		unsigned long csr:12;
-		unsigned long width:6;
-#if __riscv_xlen == 32
-		unsigned long reserved:13;
-#else
-		unsigned long reserved:45;
-#endif
-		unsigned long type:1;
-	};
-};
-
 /*
  * RISC-V doesn't have hetergenous harts yet. This need to be part of
  * per_cpu in case of harts with different pmu counters
@@ -294,8 +280,13 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
 		cflags |= SBI_PMU_CFG_FLAG_SET_UINH;
 
 	/* retrieve the available counter index */
+#if defined(CONFIG_32BIT)
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
+			cflags, hwc->event_base, hwc->config, hwc->config >> 32);
+#else
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, cmask,
 			cflags, hwc->event_base, hwc->config, 0);
+#endif
 	if (ret.error) {
 		pr_debug("Not able to find a counter for event %lx config %llx\n",
 			hwc->event_base, hwc->config);
@@ -437,8 +428,13 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE;
 
+#if defined(CONFIG_32BIT)
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
 			1, flag, ival, ival >> 32, 0);
+#else
+	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
+			1, flag, ival, 0, 0);
+#endif
 	if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
 		pr_err("Starting counter idx %d failed with error %d\n",
 			hwc->idx, sbi_err_map_linux_errno(ret.error));
@@ -545,8 +541,14 @@ static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu,
 			hwc = &event->hw;
 			max_period = riscv_pmu_ctr_get_width_mask(event);
 			init_val = local64_read(&hwc->prev_count) & max_period;
+#if defined(CONFIG_32BIT)
+			sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1,
+				  flag, init_val, init_val >> 32, 0);
+#else
 			sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1,
 				  flag, init_val, 0, 0);
+#endif
+			perf_event_update_userpage(event);
 		}
 		ctr_ovf_mask = ctr_ovf_mask >> 1;
 		idx++;

scripts/remove-stale-files

@@ -42,6 +42,8 @@ if [ -n "${building_out_of_srctree}" ]; then
 	done
 fi
 
+rm -f arch/riscv/purgatory/kexec-purgatory.c
+
 rm -f scripts/extract-cert
 
 rm -f arch/x86/purgatory/kexec-purgatory.c

tools/testing/selftests/wireguard/qemu/arch/riscv32.config

@@ -1,3 +1,4 @@
+CONFIG_NONPORTABLE=y
 CONFIG_ARCH_RV32I=y
 CONFIG_MMU=y
 CONFIG_FPU=y