ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP
This is the addition of the new SAMA5D2 Industrial Connectivity Platform(ICP). Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20200410164320.7658-3-cristian.birsan@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
Cristian Birsan
Alexandre Belloni
parent
a2e269ca29
commit
68a95ef72c
@ -55,6 +55,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
|
||||
at91-nattis-2-natte-2.dtb \
|
||||
at91-sama5d27_som1_ek.dtb \
|
||||
at91-sama5d27_wlsom1_ek.dtb \
|
||||
at91-sama5d2_icp.dtb \
|
||||
at91-sama5d2_ptc_ek.dtb \
|
||||
at91-sama5d2_xplained.dtb \
|
||||
at91-sama5d3_xplained.dtb \
|
||||
|
||||
797
arch/arm/boot/dts/at91-sama5d2_icp.dts
Normal file
797
arch/arm/boot/dts/at91-sama5d2_icp.dts
Normal file
@ -0,0 +1,797 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
|
||||
*
|
||||
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
|
||||
*
|
||||
* Author: Radu Pirea & Razvan Stefanescu,
|
||||
* Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
|
||||
* Cristian Birsan <cristian.birsan@microchip.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "sama5d2.dtsi"
|
||||
#include "sama5d2-pinfunc.h"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/atmel-flexcom.h>
|
||||
|
||||
/ {
|
||||
model = "Microchip SAMA5D2-ICP";
|
||||
compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0; /* debug uart0 + mikro BUS 1 */
|
||||
serial1 = &uart1; /* mikro BUS 3 */
|
||||
serial3 = &uart3; /* mikro BUS 2 */
|
||||
serial5 = &uart5; /* flx2 */
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_key_gpio_default>;
|
||||
status = "okay";
|
||||
|
||||
sw4 {
|
||||
label = "USER_PB1";
|
||||
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <0x104>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_led_gpio_default>;
|
||||
status = "okay"; /* conflict with pwm0 */
|
||||
|
||||
red {
|
||||
label = "red";
|
||||
gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
green {
|
||||
label = "green";
|
||||
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
blue {
|
||||
label = "blue";
|
||||
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
vddana-supply = <&vdd_io_reg>;
|
||||
vref-supply = <&vdd_io_reg>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can0_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can1_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&flx0 { /* mikrobus2 spi */
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi2: spi@400 {
|
||||
compatible = "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
|
||||
clock-names = "spi_clk";
|
||||
cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch0: ksz8563@0 {
|
||||
compatible = "microchip,ksz8563";
|
||||
reg = <0>;
|
||||
phy-mode = "mii";
|
||||
reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
|
||||
|
||||
spi-max-frequency = <500000>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "cpu";
|
||||
ethernet = <&macb0>;
|
||||
fixed-link {
|
||||
speed = <100>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flx2 {
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
||||
status = "okay";
|
||||
|
||||
uart5: serial@200 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(15))>,
|
||||
<&dma0
|
||||
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
|
||||
AT91_XDMAC_DT_PERID(16))>;
|
||||
dma-names = "tx", "rx";
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
|
||||
clock-names = "usart";
|
||||
pinctrl-0 = <&pinctrl_flx2_default>;
|
||||
pinctrl-names = "default";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay"; /* Conflict w/ qspi1. */
|
||||
};
|
||||
};
|
||||
|
||||
&flx3 { /* mikrobus1 spi */
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
|
||||
status = "okay";
|
||||
|
||||
spi3: spi@400 {
|
||||
compatible = "atmel,at91rm9200-spi";
|
||||
reg = <0x400 0x200>;
|
||||
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
|
||||
clock-names = "spi_clk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&flx4 {
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
|
||||
status = "okay";
|
||||
|
||||
i2c2: i2c@600 {
|
||||
compatible = "atmel,sama5d2-i2c";
|
||||
reg = <0x600 0x200>;
|
||||
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
dmas = <0>, <0>;
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_flx4_default>;
|
||||
atmel,fifo-size = <16>;
|
||||
status = "okay";
|
||||
|
||||
mcp16502@5b {
|
||||
compatible = "microchip,mcp16502";
|
||||
reg = <0x5b>;
|
||||
status = "okay";
|
||||
lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
|
||||
|
||||
regulators {
|
||||
vdd_io_reg: VDD_IO {
|
||||
regulator-name = "VDD_IO";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
regulator-initial-mode = <2>;
|
||||
regulator-allowed-modes = <2>, <4>;
|
||||
regulator-always-on;
|
||||
|
||||
regulator-state-standby {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
VDD_DDR {
|
||||
regulator-name = "VDD_DDR";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
regulator-initial-mode = <2>;
|
||||
regulator-allowed-modes = <2>, <4>;
|
||||
regulator-always-on;
|
||||
|
||||
regulator-state-standby {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
VDD_CORE {
|
||||
regulator-name = "VDD_CORE";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
regulator-initial-mode = <2>;
|
||||
regulator-allowed-modes = <2>, <4>;
|
||||
regulator-always-on;
|
||||
|
||||
regulator-state-standby {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
VDD_OTHER {
|
||||
regulator-name = "VDD_OTHER";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
regulator-initial-mode = <2>;
|
||||
regulator-allowed-modes = <2>, <4>;
|
||||
regulator-always-on;
|
||||
|
||||
regulator-state-standby {
|
||||
regulator-on-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-mode = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
LDO1 {
|
||||
regulator-name = "LDO1";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
regulator-always-on;
|
||||
|
||||
regulator-state-standby {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
LDO2 {
|
||||
regulator-name = "LDO2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
regulator-always-on;
|
||||
|
||||
regulator-state-standby {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 { /* mikrobus i2c */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
dmas = <0>, <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1_default>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x52>;
|
||||
pagesize = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
eeprom@53 {
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
|
||||
phy-mode = "mii";
|
||||
status = "okay";
|
||||
|
||||
fixed-link {
|
||||
speed = <100>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&pioA {
|
||||
pinctrl_adc_default: adc_default {
|
||||
pinmux = <PIN_PD24__GPIO>,
|
||||
<PIN_PD25__GPIO>,
|
||||
<PIN_PD26__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
/*
|
||||
* The ADTRG pin can work on any edge type.
|
||||
* In here it's being pulled up, so need to
|
||||
* connect it to ground to get an edge e.g.
|
||||
* Trigger can be configured on falling, rise
|
||||
* or any edge, and the pull-up can be changed
|
||||
* to pull-down or left floating according to
|
||||
* needs.
|
||||
*/
|
||||
pinctrl_adtrg_default: adtrg_default {
|
||||
pinmux = <PIN_PD31__ADTRG>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pinctrl_flx4_default: flx4_default {
|
||||
pinmux = <PIN_PC28__FLEXCOM4_IO0>,
|
||||
<PIN_PC29__FLEXCOM4_IO1>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_can0_default: can0_default {
|
||||
pinmux = <PIN_PC10__CANTX0>,
|
||||
<PIN_PC11__CANRX0>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_can1_default: can1_default {
|
||||
pinmux = <PIN_PC26__CANTX1>,
|
||||
<PIN_PC27__CANRX1>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_i2c1_default: i2c1_default {
|
||||
pinmux = <PIN_PD19__TWD1>,
|
||||
<PIN_PD20__TWCK1>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_key_gpio_default: key_gpio_default {
|
||||
pinmux = <PIN_PD0__GPIO>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pinctrl_led_gpio_default: led_gpio_default {
|
||||
pinmux = <PIN_PB0__GPIO>,
|
||||
<PIN_PB1__GPIO>,
|
||||
<PIN_PA31__GPIO>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pinctrl_qspi1_default: qspi1_default {
|
||||
pinmux = <PIN_PA6__QSPI1_SCK>,
|
||||
<PIN_PA7__QSPI1_IO0>,
|
||||
<PIN_PA8__QSPI1_IO1>,
|
||||
<PIN_PA9__QSPI1_IO2>,
|
||||
<PIN_PA10__QSPI1_IO3>,
|
||||
<PIN_PA11__QSPI1_CS>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_sdmmc0_default: sdmmc0_default {
|
||||
cmd_data {
|
||||
pinmux = <PIN_PA1__SDMMC0_CMD>,
|
||||
<PIN_PA2__SDMMC0_DAT0>,
|
||||
<PIN_PA3__SDMMC0_DAT1>,
|
||||
<PIN_PA4__SDMMC0_DAT2>,
|
||||
<PIN_PA5__SDMMC0_DAT3>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
ck_cd {
|
||||
pinmux = <PIN_PA0__SDMMC0_CK>,
|
||||
<PIN_PA13__SDMMC0_CD>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_sdmmc1_default: sdmmc1_default {
|
||||
cmd_data {
|
||||
pinmux = <PIN_PA18__SDMMC1_DAT0>,
|
||||
<PIN_PA19__SDMMC1_DAT1>,
|
||||
<PIN_PA20__SDMMC1_DAT2>,
|
||||
<PIN_PA21__SDMMC1_DAT3>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
ck_cd {
|
||||
pinmux = <PIN_PA22__SDMMC1_CK>,
|
||||
<PIN_PA28__SDMMC1_CMD>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_mikrobus_i2c: mikrobus_i2c {
|
||||
pinmux = <PIN_PD22__TWCK0>,
|
||||
<PIN_PD21__TWD0>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_an: mikrobus1_an {
|
||||
pinmux = <PIN_PD26__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_rst: mikrobus1_rst {
|
||||
pinmux = <PIN_PC5__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
|
||||
pinmux = <PIN_PC21__FLEXCOM3_IO3>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_spi: mikrobus1_spi {
|
||||
pinmux = <PIN_PC20__FLEXCOM3_IO0>,
|
||||
<PIN_PC19__FLEXCOM3_IO1>,
|
||||
<PIN_PC18__FLEXCOM3_IO2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_pwm: mikrobus1_pwm {
|
||||
pinmux = <PIN_PC4__TIOB1>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_int: mikrobus1_int {
|
||||
pinmux = <PIN_PC3__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus1_uart: mikrobus1_uart {
|
||||
pinmux = <PIN_PB26__URXD0>,
|
||||
<PIN_PB27__UTXD0>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_an: mikrobus2_an {
|
||||
pinmux = <PIN_PD25__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_rst: mikrobus2_rst {
|
||||
pinmux = <PIN_PB24__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
|
||||
pinmux = <PIN_PB31__FLEXCOM0_IO3>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_spi: mikrobus2_spi {
|
||||
pinmux = <PIN_PB28__FLEXCOM0_IO0>,
|
||||
<PIN_PB29__FLEXCOM0_IO1>,
|
||||
<PIN_PB30__FLEXCOM0_IO2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_ksz_spi_cs: ksz_spi_cs {
|
||||
pinmux = <PIN_PC0__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_pwm: mikrobus2_pwm {
|
||||
pinmux = <PIN_PB23__TIOB2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_int: mikrobus2_int {
|
||||
pinmux = <PIN_PB22__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus2_uart: mikrobus2_uart {
|
||||
pinmux = <PIN_PC12__URXD3>,
|
||||
<PIN_PC13__UTXD3>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_an: mikrobus3_an {
|
||||
pinmux = <PIN_PD24__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_rst: mikrobus3_rst {
|
||||
pinmux = <PIN_PB21__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
|
||||
pinmux = <PIN_PA17__SPI0_NPCS0>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_spi: mikrobus3_spi {
|
||||
pinmux = <PIN_PA14__SPI0_SPCK>,
|
||||
<PIN_PA16__SPI0_MISO>,
|
||||
<PIN_PA15__SPI0_MOSI>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_pwm: mikrobus3_pwm {
|
||||
pinmux = <PIN_PB20__TIOB3>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_int: mikrobus3_int {
|
||||
pinmux = <PIN_PB18__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_mikrobus3_uart: mikrobus3_uart {
|
||||
pinmux = <PIN_PC7__URXD1>,
|
||||
<PIN_PC8__UTXD1>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_usb_default: usb_default {
|
||||
pinmux = <PIN_PC17__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
pinmux = <PIN_PD23__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
|
||||
pinmux = <PIN_PB5__PWMH2>,
|
||||
<PIN_PB6__PWML2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pinctrl_macb0_default: macb0_default {
|
||||
pinmux = <PIN_PD1__GRXCK>,
|
||||
<PIN_PD2__GTXER>,
|
||||
<PIN_PD5__GRX2>,
|
||||
<PIN_PD6__GRX3>,
|
||||
<PIN_PD7__GTX2>,
|
||||
<PIN_PD8__GTX3>,
|
||||
<PIN_PD9__GTXCK>,
|
||||
<PIN_PD10__GTXEN>,
|
||||
<PIN_PD11__GRXDV>,
|
||||
<PIN_PD12__GRXER>,
|
||||
<PIN_PD13__GRX0>,
|
||||
<PIN_PD14__GRX1>,
|
||||
<PIN_PD15__GTX0>,
|
||||
<PIN_PD16__GTX1>,
|
||||
<PIN_PD17__GMDC>,
|
||||
<PIN_PD18__GMDIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_macb0_phy_irq: macb0_phy_irq {
|
||||
pinmux = <PIN_PD3__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_macb0_rst: macb0_sw_rst {
|
||||
pinmux = <PIN_PD4__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_flx2_default: flx2_default {
|
||||
pinmux = <PIN_PA6__FLEXCOM2_IO0>,
|
||||
<PIN_PA7__FLEXCOM2_IO1>,
|
||||
<PIN_PA9__FLEXCOM2_IO3>,
|
||||
<PIN_PA10__FLEXCOM2_IO4>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
|
||||
status = "disabled"; /* conflict with leds, HSIC */
|
||||
};
|
||||
|
||||
&qspi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qspi1_default>;
|
||||
status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <80000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
m25p,fast-read;
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "qspi: at91bootstrap";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
};
|
||||
|
||||
bootloader@40000 {
|
||||
label = "qspi: bootloader";
|
||||
reg = <0x00040000 0x000c0000>;
|
||||
};
|
||||
|
||||
bootloaderenvred@100000 {
|
||||
label = "qspi: bootloader env redundant";
|
||||
reg = <0x00100000 0x00040000>;
|
||||
};
|
||||
|
||||
bootloaderenv@140000 {
|
||||
label = "qspi: bootloader env";
|
||||
reg = <0x00140000 0x00040000>;
|
||||
};
|
||||
|
||||
dtb@180000 {
|
||||
label = "qspi: device tree";
|
||||
reg = <0x00180000 0x00080000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "qspi: kernel";
|
||||
reg = <0x00200000 0x00600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
no-1-8-v;
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdmmc0_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&shutdown_controller {
|
||||
atmel,shdwc-debouncer = <976>;
|
||||
atmel,wakeup-rtc-timer;
|
||||
|
||||
input@0 {
|
||||
reg = <0>;
|
||||
atmel,wakeup-type = "low";
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 { /* mikrobus3 spi */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcb0 {
|
||||
timer0: timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer1: timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus1_uart>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus3_uart>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mikrobus2_uart>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
num-ports = <3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
phy_type = "hsic";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user