From 0ba4581c84cfb39fd527f6b3457f1c97f6356c04 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 10 Feb 2016 08:09:10 -0200 Subject: [PATCH 1/2] [media] adv7604: fix tx 5v detect regression The 5 volt detect functionality broke in 3.14: the code reads IO register 0x70 again after it has already been cleared. Instead it should use the cached irq_reg_0x70 value and the io_write to 0x71 to clear 0x70 can be dropped since this has already been done. Signed-off-by: Hans Verkuil Cc: # for v3.14 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7604.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index f8dd7505b529..e1719ffdfb3d 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -1960,10 +1960,9 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled) } /* tx 5v detect */ - tx_5v = io_read(sd, 0x70) & info->cable_det_mask; + tx_5v = irq_reg_0x70 & info->cable_det_mask; if (tx_5v) { v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v); - io_write(sd, 0x71, tx_5v); adv76xx_s_detect_tx_5v_ctrl(sd); if (handled) *handled = true; From 58402b6e98f9059420e64b296db6c4cb6f6c1117 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 29 Feb 2016 09:02:47 +0100 Subject: [PATCH 2/2] [media] media.h: use hex values for range offsets, move connectors base up. Make the base offset hexadecimal to simplify debugging since the base addresses are hex too. The offsets for connectors is also changed to start after the 'reserved' range 0x10000-0x2ffff. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/media.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index f0328524be6e..13e19a18f97f 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -66,25 +66,25 @@ struct media_device_info { /* * DVB entities */ -#define MEDIA_ENT_F_DTV_DEMOD (MEDIA_ENT_F_BASE + 1) -#define MEDIA_ENT_F_TS_DEMUX (MEDIA_ENT_F_BASE + 2) -#define MEDIA_ENT_F_DTV_CA (MEDIA_ENT_F_BASE + 3) -#define MEDIA_ENT_F_DTV_NET_DECAP (MEDIA_ENT_F_BASE + 4) +#define MEDIA_ENT_F_DTV_DEMOD (MEDIA_ENT_F_BASE + 0x00001) +#define MEDIA_ENT_F_TS_DEMUX (MEDIA_ENT_F_BASE + 0x00002) +#define MEDIA_ENT_F_DTV_CA (MEDIA_ENT_F_BASE + 0x00003) +#define MEDIA_ENT_F_DTV_NET_DECAP (MEDIA_ENT_F_BASE + 0x00004) /* * I/O entities */ -#define MEDIA_ENT_F_IO_DTV (MEDIA_ENT_F_BASE + 1001) -#define MEDIA_ENT_F_IO_VBI (MEDIA_ENT_F_BASE + 1002) -#define MEDIA_ENT_F_IO_SWRADIO (MEDIA_ENT_F_BASE + 1003) +#define MEDIA_ENT_F_IO_DTV (MEDIA_ENT_F_BASE + 0x01001) +#define MEDIA_ENT_F_IO_VBI (MEDIA_ENT_F_BASE + 0x01002) +#define MEDIA_ENT_F_IO_SWRADIO (MEDIA_ENT_F_BASE + 0x01003) /* * Connectors */ /* It is a responsibility of the entity drivers to add connectors and links */ -#define MEDIA_ENT_F_CONN_RF (MEDIA_ENT_F_BASE + 10001) -#define MEDIA_ENT_F_CONN_SVIDEO (MEDIA_ENT_F_BASE + 10002) -#define MEDIA_ENT_F_CONN_COMPOSITE (MEDIA_ENT_F_BASE + 10003) +#define MEDIA_ENT_F_CONN_RF (MEDIA_ENT_F_BASE + 0x30001) +#define MEDIA_ENT_F_CONN_SVIDEO (MEDIA_ENT_F_BASE + 0x30002) +#define MEDIA_ENT_F_CONN_COMPOSITE (MEDIA_ENT_F_BASE + 0x30003) /* * Don't touch on those. The ranges MEDIA_ENT_F_OLD_BASE and