forked from Minki/linux
e1000: Add support for new hardware (ESB2)
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
This commit is contained in:
Jeff Kirsher
root
parent
2a1af5d7df
commit
6418ecc68e
@ -589,6 +589,7 @@ e1000_get_drvinfo(struct net_device *netdev,
|
||||
case e1000_82571:
|
||||
case e1000_82572:
|
||||
case e1000_82573:
|
||||
case e1000_80003es2lan:
|
||||
sprintf(firmware_version, "%d.%d-%d",
|
||||
(eeprom_data & 0xF000) >> 12,
|
||||
(eeprom_data & 0x0FF0) >> 4,
|
||||
@ -762,6 +763,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data)
|
||||
/* there are several bits on newer hardware that are r/w */
|
||||
case e1000_82571:
|
||||
case e1000_82572:
|
||||
case e1000_80003es2lan:
|
||||
toggle = 0x7FFFF3FF;
|
||||
break;
|
||||
case e1000_82573:
|
||||
@ -1320,6 +1322,7 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter)
|
||||
case e1000_82571:
|
||||
case e1000_82572:
|
||||
case e1000_82573:
|
||||
case e1000_80003es2lan:
|
||||
return e1000_integrated_phy_loopback(adapter);
|
||||
break;
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -60,6 +60,7 @@ typedef enum {
|
||||
e1000_82571,
|
||||
e1000_82572,
|
||||
e1000_82573,
|
||||
e1000_80003es2lan,
|
||||
e1000_num_macs
|
||||
} e1000_mac_type;
|
||||
|
||||
@ -138,6 +139,13 @@ typedef enum {
|
||||
e1000_cable_length_undefined = 0xFF
|
||||
} e1000_cable_length;
|
||||
|
||||
typedef enum {
|
||||
e1000_gg_cable_length_60 = 0,
|
||||
e1000_gg_cable_length_60_115 = 1,
|
||||
e1000_gg_cable_length_115_150 = 2,
|
||||
e1000_gg_cable_length_150 = 4
|
||||
} e1000_gg_cable_length;
|
||||
|
||||
typedef enum {
|
||||
e1000_igp_cable_length_10 = 10,
|
||||
e1000_igp_cable_length_20 = 20,
|
||||
@ -208,6 +216,7 @@ typedef enum {
|
||||
e1000_phy_m88 = 0,
|
||||
e1000_phy_igp,
|
||||
e1000_phy_igp_2,
|
||||
e1000_phy_gg82563,
|
||||
e1000_phy_undefined = 0xFF
|
||||
} e1000_phy_type;
|
||||
|
||||
@ -281,6 +290,7 @@ typedef enum {
|
||||
#define E1000_ERR_MASTER_REQUESTS_PENDING 10
|
||||
#define E1000_ERR_HOST_INTERFACE_COMMAND 11
|
||||
#define E1000_BLK_PHY_RESET 12
|
||||
#define E1000_ERR_SWFW_SYNC 13
|
||||
|
||||
/* Function prototypes */
|
||||
/* Initialization */
|
||||
@ -304,6 +314,8 @@ int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
|
||||
int32_t e1000_phy_reset(struct e1000_hw *hw);
|
||||
int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
|
||||
int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
|
||||
int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
|
||||
int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
|
||||
|
||||
/* EEPROM Functions */
|
||||
int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
|
||||
@ -454,6 +466,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
|
||||
#define E1000_DEV_ID_82573E_IAMT 0x108C
|
||||
#define E1000_DEV_ID_82573L 0x109A
|
||||
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
|
||||
#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
|
||||
#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
|
||||
|
||||
|
||||
#define NODE_ADDRESS_SIZE 6
|
||||
@ -850,6 +864,7 @@ struct e1000_ffvt_entry {
|
||||
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
|
||||
#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
|
||||
#define E1000_TCTL 0x00400 /* TX Control - RW */
|
||||
#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
|
||||
#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
|
||||
#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
|
||||
#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
|
||||
@ -996,6 +1011,11 @@ struct e1000_ffvt_entry {
|
||||
#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
|
||||
#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
|
||||
|
||||
#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
|
||||
#define E1000_MDPHYA 0x0003C /* PHY address - RW */
|
||||
#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
|
||||
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
|
||||
|
||||
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
|
||||
#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
|
||||
#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
|
||||
@ -1065,6 +1085,7 @@ struct e1000_ffvt_entry {
|
||||
#define E1000_82542_RXCW E1000_RXCW
|
||||
#define E1000_82542_MTA 0x00200
|
||||
#define E1000_82542_TCTL E1000_TCTL
|
||||
#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
|
||||
#define E1000_82542_TIPG E1000_TIPG
|
||||
#define E1000_82542_TDBAL 0x00420
|
||||
#define E1000_82542_TDBAH 0x00424
|
||||
@ -1212,6 +1233,8 @@ struct e1000_ffvt_entry {
|
||||
#define E1000_82542_RSSRK E1000_RSSRK
|
||||
#define E1000_82542_RSSIM E1000_RSSIM
|
||||
#define E1000_82542_RSSIR E1000_RSSIR
|
||||
#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
|
||||
#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
|
||||
|
||||
/* Statistics counters collected by the MAC */
|
||||
struct e1000_hw_stats {
|
||||
@ -1303,6 +1326,7 @@ struct e1000_hw {
|
||||
e1000_ffe_config ffe_config_state;
|
||||
uint32_t asf_firmware_present;
|
||||
uint32_t eeprom_semaphore_present;
|
||||
uint32_t swfw_sync_present;
|
||||
unsigned long io_base;
|
||||
uint32_t phy_id;
|
||||
uint32_t phy_revision;
|
||||
@ -1394,6 +1418,8 @@ struct e1000_hw {
|
||||
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
|
||||
#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
|
||||
#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
|
||||
#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
|
||||
#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
|
||||
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
|
||||
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
|
||||
#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
|
||||
@ -1430,6 +1456,16 @@ struct e1000_hw {
|
||||
#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
|
||||
#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
|
||||
#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
|
||||
#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
|
||||
#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
|
||||
#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
|
||||
#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
|
||||
#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
|
||||
#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
|
||||
#define E1000_STATUS_FUSE_8 0x04000000
|
||||
#define E1000_STATUS_FUSE_9 0x08000000
|
||||
#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
|
||||
#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
|
||||
|
||||
/* Constants used to intrepret the masked PCI-X bus speed. */
|
||||
#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
|
||||
@ -1507,6 +1543,8 @@ struct e1000_hw {
|
||||
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
|
||||
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
|
||||
#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
|
||||
#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
|
||||
#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
|
||||
#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
|
||||
#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
|
||||
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
|
||||
@ -1516,6 +1554,9 @@ struct e1000_hw {
|
||||
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
|
||||
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
|
||||
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
|
||||
#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
|
||||
#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
|
||||
#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
|
||||
|
||||
/* MDI Control */
|
||||
#define E1000_MDIC_DATA_MASK 0x0000FFFF
|
||||
@ -1529,6 +1570,32 @@ struct e1000_hw {
|
||||
#define E1000_MDIC_INT_EN 0x20000000
|
||||
#define E1000_MDIC_ERROR 0x40000000
|
||||
|
||||
#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
|
||||
#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
|
||||
#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
|
||||
#define E1000_KUMCTRLSTA_REN 0x00200000
|
||||
|
||||
#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
|
||||
#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
|
||||
#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
|
||||
#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
|
||||
#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
|
||||
#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
|
||||
#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
|
||||
#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
|
||||
#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
|
||||
|
||||
/* FIFO Control */
|
||||
#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
|
||||
#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
|
||||
|
||||
/* In-Band Control */
|
||||
#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
|
||||
|
||||
/* Half-Duplex Control */
|
||||
#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
|
||||
#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
|
||||
|
||||
/* LED Control */
|
||||
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
|
||||
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
|
||||
@ -1591,6 +1658,13 @@ struct e1000_hw {
|
||||
#define E1000_ICR_MNG 0x00040000 /* Manageability event */
|
||||
#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
|
||||
#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
|
||||
#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
|
||||
#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
|
||||
#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
|
||||
#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
|
||||
#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
|
||||
#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
|
||||
#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
|
||||
|
||||
/* Interrupt Cause Set */
|
||||
#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
|
||||
@ -1611,6 +1685,12 @@ struct e1000_hw {
|
||||
#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
|
||||
#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
|
||||
#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
|
||||
#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
|
||||
#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
|
||||
#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
|
||||
#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
|
||||
#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
|
||||
#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
|
||||
|
||||
/* Interrupt Mask Set */
|
||||
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
|
||||
@ -1631,6 +1711,12 @@ struct e1000_hw {
|
||||
#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
|
||||
#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
|
||||
#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
|
||||
#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
|
||||
#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
|
||||
#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
|
||||
#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
|
||||
#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
|
||||
#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
|
||||
|
||||
/* Interrupt Mask Clear */
|
||||
#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
|
||||
@ -1651,6 +1737,12 @@ struct e1000_hw {
|
||||
#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
|
||||
#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
|
||||
#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
|
||||
#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
|
||||
#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
|
||||
#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
|
||||
#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
|
||||
#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
|
||||
#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
|
||||
|
||||
/* Receive Control */
|
||||
#define E1000_RCTL_RST 0x00000001 /* Software reset */
|
||||
@ -1720,6 +1812,12 @@ struct e1000_hw {
|
||||
#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
|
||||
#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
|
||||
|
||||
/* SW_W_SYNC definitions */
|
||||
#define E1000_SWFW_EEP_SM 0x0001
|
||||
#define E1000_SWFW_PHY0_SM 0x0002
|
||||
#define E1000_SWFW_PHY1_SM 0x0004
|
||||
#define E1000_SWFW_MAC_CSR_SM 0x0008
|
||||
|
||||
/* Receive Descriptor */
|
||||
#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
|
||||
#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
|
||||
@ -1798,6 +1896,11 @@ struct e1000_hw {
|
||||
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
|
||||
#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
|
||||
#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
|
||||
/* Extended Transmit Control */
|
||||
#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
|
||||
#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
|
||||
|
||||
#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000
|
||||
|
||||
/* Receive Checksum Control */
|
||||
#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
|
||||
@ -2044,6 +2147,7 @@ struct e1000_host_command_info {
|
||||
#define EEPROM_CHECKSUM_REG 0x003F
|
||||
|
||||
#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
|
||||
#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
|
||||
|
||||
/* Word definitions for ID LED Settings */
|
||||
#define ID_LED_RESERVED_0000 0x0000
|
||||
@ -2132,8 +2236,11 @@ struct e1000_host_command_info {
|
||||
|
||||
#define DEFAULT_82542_TIPG_IPGR2 10
|
||||
#define DEFAULT_82543_TIPG_IPGR2 6
|
||||
#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
|
||||
#define E1000_TIPG_IPGR2_SHIFT 20
|
||||
|
||||
#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
|
||||
#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008
|
||||
#define E1000_TXDMAC_DPP 0x00000001
|
||||
|
||||
/* Adaptive IFS defines */
|
||||
@ -2374,6 +2481,78 @@ struct e1000_host_command_info {
|
||||
|
||||
#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
|
||||
|
||||
/* Bits...
|
||||
* 15-5: page
|
||||
* 4-0: register offset
|
||||
*/
|
||||
#define GG82563_PAGE_SHIFT 5
|
||||
#define GG82563_REG(page, reg) \
|
||||
(((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
|
||||
#define GG82563_MIN_ALT_REG 30
|
||||
|
||||
/* GG82563 Specific Registers */
|
||||
#define GG82563_PHY_SPEC_CTRL \
|
||||
GG82563_REG(0, 16) /* PHY Specific Control */
|
||||
#define GG82563_PHY_SPEC_STATUS \
|
||||
GG82563_REG(0, 17) /* PHY Specific Status */
|
||||
#define GG82563_PHY_INT_ENABLE \
|
||||
GG82563_REG(0, 18) /* Interrupt Enable */
|
||||
#define GG82563_PHY_SPEC_STATUS_2 \
|
||||
GG82563_REG(0, 19) /* PHY Specific Status 2 */
|
||||
#define GG82563_PHY_RX_ERR_CNTR \
|
||||
GG82563_REG(0, 21) /* Receive Error Counter */
|
||||
#define GG82563_PHY_PAGE_SELECT \
|
||||
GG82563_REG(0, 22) /* Page Select */
|
||||
#define GG82563_PHY_SPEC_CTRL_2 \
|
||||
GG82563_REG(0, 26) /* PHY Specific Control 2 */
|
||||
#define GG82563_PHY_PAGE_SELECT_ALT \
|
||||
GG82563_REG(0, 29) /* Alternate Page Select */
|
||||
#define GG82563_PHY_TEST_CLK_CTRL \
|
||||
GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
|
||||
|
||||
#define GG82563_PHY_MAC_SPEC_CTRL \
|
||||
GG82563_REG(2, 21) /* MAC Specific Control Register */
|
||||
#define GG82563_PHY_MAC_SPEC_CTRL_2 \
|
||||
GG82563_REG(2, 26) /* MAC Specific Control 2 */
|
||||
|
||||
#define GG82563_PHY_DSP_DISTANCE \
|
||||
GG82563_REG(5, 26) /* DSP Distance */
|
||||
|
||||
/* Page 193 - Port Control Registers */
|
||||
#define GG82563_PHY_KMRN_MODE_CTRL \
|
||||
GG82563_REG(193, 16) /* Kumeran Mode Control */
|
||||
#define GG82563_PHY_PORT_RESET \
|
||||
GG82563_REG(193, 17) /* Port Reset */
|
||||
#define GG82563_PHY_REVISION_ID \
|
||||
GG82563_REG(193, 18) /* Revision ID */
|
||||
#define GG82563_PHY_DEVICE_ID \
|
||||
GG82563_REG(193, 19) /* Device ID */
|
||||
#define GG82563_PHY_PWR_MGMT_CTRL \
|
||||
GG82563_REG(193, 20) /* Power Management Control */
|
||||
#define GG82563_PHY_RATE_ADAPT_CTRL \
|
||||
GG82563_REG(193, 25) /* Rate Adaptation Control */
|
||||
|
||||
/* Page 194 - KMRN Registers */
|
||||
#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
|
||||
GG82563_REG(194, 16) /* FIFO's Control/Status */
|
||||
#define GG82563_PHY_KMRN_CTRL \
|
||||
GG82563_REG(194, 17) /* Control */
|
||||
#define GG82563_PHY_INBAND_CTRL \
|
||||
GG82563_REG(194, 18) /* Inband Control */
|
||||
#define GG82563_PHY_KMRN_DIAGNOSTIC \
|
||||
GG82563_REG(194, 19) /* Diagnostic */
|
||||
#define GG82563_PHY_ACK_TIMEOUTS \
|
||||
GG82563_REG(194, 20) /* Acknowledge Timeouts */
|
||||
#define GG82563_PHY_ADV_ABILITY \
|
||||
GG82563_REG(194, 21) /* Advertised Ability */
|
||||
#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
|
||||
GG82563_REG(194, 23) /* Link Partner Advertised Ability */
|
||||
#define GG82563_PHY_ADV_NEXT_PAGE \
|
||||
GG82563_REG(194, 24) /* Advertised Next Page */
|
||||
#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
|
||||
GG82563_REG(194, 25) /* Link Partner Advertised Next page */
|
||||
#define GG82563_PHY_KMRN_MISC \
|
||||
GG82563_REG(194, 26) /* Misc. */
|
||||
|
||||
/* PHY Control Register */
|
||||
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
|
||||
@ -2687,6 +2866,113 @@ struct e1000_host_command_info {
|
||||
#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
|
||||
#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
|
||||
|
||||
/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
|
||||
#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */
|
||||
#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */
|
||||
#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */
|
||||
#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */
|
||||
#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
|
||||
#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */
|
||||
#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */
|
||||
#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */
|
||||
#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */
|
||||
#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300
|
||||
#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */
|
||||
#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */
|
||||
#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */
|
||||
#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */
|
||||
#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */
|
||||
#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000
|
||||
#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12
|
||||
|
||||
/* PHY Specific Status Register (Page 0, Register 17) */
|
||||
#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */
|
||||
#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */
|
||||
#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */
|
||||
#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */
|
||||
#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */
|
||||
#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */
|
||||
#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */
|
||||
#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */
|
||||
#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */
|
||||
#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */
|
||||
#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */
|
||||
#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */
|
||||
#define GG82563_PSSR_SPEED_MASK 0xC000
|
||||
#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */
|
||||
#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */
|
||||
#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */
|
||||
|
||||
/* PHY Specific Status Register 2 (Page 0, Register 19) */
|
||||
#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */
|
||||
#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */
|
||||
#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
|
||||
#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
|
||||
#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
|
||||
#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
|
||||
#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
|
||||
#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
|
||||
#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */
|
||||
#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */
|
||||
#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */
|
||||
#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */
|
||||
#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */
|
||||
|
||||
/* PHY Specific Control Register 2 (Page 0, Register 26) */
|
||||
#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */
|
||||
#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C
|
||||
#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */
|
||||
#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */
|
||||
#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */
|
||||
#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */
|
||||
#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */
|
||||
#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000
|
||||
#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */
|
||||
#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */
|
||||
|
||||
/* MAC Specific Control Register (Page 2, Register 21) */
|
||||
/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
|
||||
#define GG82563_MSCR_TX_CLK_MASK 0x0007
|
||||
#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004
|
||||
#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005
|
||||
#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006
|
||||
#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007
|
||||
|
||||
#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
|
||||
|
||||
/* DSP Distance Register (Page 5, Register 26) */
|
||||
#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M;
|
||||
1 = 50-80M;
|
||||
2 = 80-110M;
|
||||
3 = 110-140M;
|
||||
4 = >140M */
|
||||
|
||||
/* Kumeran Mode Control Register (Page 193, Register 16) */
|
||||
#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
|
||||
#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */
|
||||
#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080
|
||||
#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400
|
||||
#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */
|
||||
#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
|
||||
|
||||
/* Power Management Control Register (Page 193, Register 20) */
|
||||
#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */
|
||||
#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */
|
||||
#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */
|
||||
#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */
|
||||
#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */
|
||||
#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */
|
||||
#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */
|
||||
#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */
|
||||
#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300
|
||||
#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */
|
||||
#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */
|
||||
#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */
|
||||
#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */
|
||||
|
||||
/* In-Band Control Register (Page 194, Register 18) */
|
||||
#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */
|
||||
|
||||
|
||||
/* Bit definitions for valid PHY IDs. */
|
||||
/* I = Integrated
|
||||
@ -2701,6 +2987,7 @@ struct e1000_host_command_info {
|
||||
#define M88E1011_I_REV_4 0x04
|
||||
#define M88E1111_I_PHY_ID 0x01410CC0
|
||||
#define L1LXT971A_PHY_ID 0x001378E0
|
||||
#define GG82563_E_PHY_ID 0x01410CA0
|
||||
|
||||
/* Miscellaneous PHY bit definitions. */
|
||||
#define PHY_PREAMBLE 0xFFFFFFFF
|
||||
|
||||
@ -157,9 +157,12 @@ static struct pci_device_id e1000_pci_tbl[] = {
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x108A),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x108B),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x108C),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x1096),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x1098),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x1099),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x109A),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
|
||||
INTEL_E1000_ETHERNET_DEVICE(0x10B9),
|
||||
/* required last entry */
|
||||
{0,}
|
||||
};
|
||||
@ -575,6 +578,7 @@ e1000_reset(struct e1000_adapter *adapter)
|
||||
break;
|
||||
case e1000_82571:
|
||||
case e1000_82572:
|
||||
case e1000_80003es2lan:
|
||||
pba = E1000_PBA_38K;
|
||||
break;
|
||||
case e1000_82573:
|
||||
@ -852,6 +856,7 @@ e1000_probe(struct pci_dev *pdev,
|
||||
case e1000_82546:
|
||||
case e1000_82546_rev_3:
|
||||
case e1000_82571:
|
||||
case e1000_80003es2lan:
|
||||
if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
|
||||
e1000_read_eeprom(&adapter->hw,
|
||||
EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user