forked from Minki/linux
V4L/DVB (7469): Preparation for supporting new devices, cleanup and saneness
To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
parent
0b5afdd2ea
commit
6394cf53ab
drivers/media/dvb/b2c2
@ -44,6 +44,14 @@ struct flexcop_dma {
|
||||
u32 size; /* size of each address in bytes */
|
||||
};
|
||||
|
||||
struct flexcop_i2c_adapter {
|
||||
struct flexcop_device *fc;
|
||||
struct i2c_adapter i2c_adap;
|
||||
|
||||
u8 no_base_addr;
|
||||
flexcop_i2c_port_t port;
|
||||
};
|
||||
|
||||
/* Control structure for data definitions that are common to
|
||||
* the B2C2-based PCI and USB devices.
|
||||
*/
|
||||
@ -72,7 +80,7 @@ struct flexcop_device {
|
||||
struct dmx_frontend mem_frontend;
|
||||
int (*fe_sleep) (struct dvb_frontend *);
|
||||
|
||||
struct i2c_adapter i2c_adap;
|
||||
struct flexcop_i2c_adapter fc_i2c_adap[3];
|
||||
struct mutex i2c_mutex;
|
||||
struct module *owner;
|
||||
|
||||
@ -87,7 +95,8 @@ struct flexcop_device {
|
||||
int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value);
|
||||
|
||||
|
||||
int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
|
||||
int (*i2c_request) (struct flexcop_i2c_adapter*,
|
||||
flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
|
||||
int (*stream_control) (struct flexcop_device*, int);
|
||||
|
||||
int (*get_mac_addr) (struct flexcop_device *fc, int extended);
|
||||
@ -128,8 +137,8 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
|
||||
* one. We have it in flexcop-i2c.c, because it is going via the actual
|
||||
* I2C-channel of the flexcop.
|
||||
*/
|
||||
int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
|
||||
flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
|
||||
int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t,
|
||||
u8 chipaddr, u8 addr, u8 *buf, u16 len);
|
||||
|
||||
/* from flexcop-sram.c */
|
||||
int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
|
||||
|
@ -114,15 +114,18 @@ static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t
|
||||
{
|
||||
int i,ret = 0;
|
||||
u8 chipaddr = 0x50 | ((addr >> 8) & 3);
|
||||
for (i = 0; i < retries; i++)
|
||||
if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0)
|
||||
for (i = 0; i < retries; i++) {
|
||||
ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
|
||||
addr & 0xff, buf, len);
|
||||
if (ret == 0)
|
||||
break;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
|
||||
{
|
||||
int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries);
|
||||
int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
|
||||
if (ret == 0)
|
||||
if (calc_lrc(buf, len - 1) != buf[len - 1])
|
||||
ret = -EINVAL;
|
||||
|
@ -183,13 +183,13 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv
|
||||
buf[2] = 0x84; /* 0xC4 */
|
||||
buf[3] = 0x08;
|
||||
|
||||
if (params->frequency < 1500000) buf[3] |= 0x10;
|
||||
if (params->frequency < 1500000)
|
||||
buf[3] |= 0x10;
|
||||
|
||||
if (fe->ops.i2c_gate_ctrl)
|
||||
fe->ops.i2c_gate_ctrl(fe, 1);
|
||||
if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) {
|
||||
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
|
||||
return -EIO;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -340,7 +340,7 @@ static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe,
|
||||
|
||||
if (fe->ops.i2c_gate_ctrl)
|
||||
fe->ops.i2c_gate_ctrl(fe, 1);
|
||||
if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
|
||||
if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
|
||||
return -EIO;
|
||||
return 0;
|
||||
}
|
||||
@ -389,10 +389,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
|
||||
if (fe->ops.i2c_gate_ctrl)
|
||||
fe->ops.i2c_gate_ctrl(fe, 0);
|
||||
deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
|
||||
ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_TUNER, 0x61, buf[0], &buf[1], 3);
|
||||
ret = fc->i2c_request(&fc->fc_i2c_adap[2],
|
||||
FC_WRITE, 0x61, buf[0], &buf[1], 3);
|
||||
deb_tuner("tuner write returned: %d\n",ret);
|
||||
|
||||
return 0;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static u8 alps_tdee4_stv0297_inittab[] = {
|
||||
@ -479,53 +480,67 @@ static struct stv0297_config alps_tdee4_stv0297_config = {
|
||||
int flexcop_frontend_init(struct flexcop_device *fc)
|
||||
{
|
||||
struct dvb_frontend_ops *ops;
|
||||
struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
|
||||
|
||||
/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
|
||||
if ((fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
ops = &fc->fe->ops;
|
||||
|
||||
ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
|
||||
|
||||
ops->set_voltage = flexcop_set_voltage;
|
||||
|
||||
fc->fe_sleep = ops->sleep;
|
||||
ops->sleep = flexcop_sleep;
|
||||
fc->fe_sleep = ops->sleep;
|
||||
ops->sleep = flexcop_sleep;
|
||||
|
||||
fc->dev_type = FC_SKY;
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
fc->dev_type = FC_SKY;
|
||||
info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
|
||||
} else
|
||||
/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
|
||||
if ((fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
|
||||
fc->dev_type = FC_AIR_DVB;
|
||||
fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
fc->dev_type = FC_AIR_DVB;
|
||||
fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
|
||||
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
|
||||
} else
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
/* try the air atsc 2nd generation (nxt2002) */
|
||||
if ((fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC2;
|
||||
fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC2;
|
||||
dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
|
||||
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
|
||||
} else
|
||||
/* try the air atsc 3nd generation (lgdt3303) */
|
||||
if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC3;
|
||||
dvb_attach(simple_tuner_attach, fc->fe,
|
||||
&fc->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF);
|
||||
info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
|
||||
} else
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC3;
|
||||
dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
|
||||
TUNER_LG_TDVS_H06XF);
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
|
||||
if ((fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC1;
|
||||
info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
|
||||
} else
|
||||
fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
fc->dev_type = FC_AIR_ATSC1;
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
/* try the cable dvb (stv0297) */
|
||||
if ((fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->dev_type = FC_CABLE;
|
||||
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
fc->dev_type = FC_CABLE;
|
||||
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
|
||||
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
|
||||
} else
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
|
||||
if ((fc->fe = dvb_attach(vp310_mt312_attach, &skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
|
||||
fc->fe = dvb_attach(vp310_mt312_attach,
|
||||
&skystar23_samsung_tbdu18132_config, i2c);
|
||||
if (fc->fe != NULL) {
|
||||
ops = &fc->fe->ops;
|
||||
|
||||
ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
|
||||
@ -539,19 +554,21 @@ int flexcop_frontend_init(struct flexcop_device *fc)
|
||||
ops->sleep = flexcop_sleep;
|
||||
|
||||
fc->dev_type = FC_SKY_OLD;
|
||||
info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
|
||||
goto fe_found;
|
||||
}
|
||||
|
||||
if (fc->fe == NULL) {
|
||||
err("no frontend driver found for this B2C2/FlexCop adapter");
|
||||
return -ENODEV;
|
||||
} else {
|
||||
if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
|
||||
err("frontend registration failed!");
|
||||
dvb_frontend_detach(fc->fe);
|
||||
fc->fe = NULL;
|
||||
return -EINVAL;
|
||||
}
|
||||
err("no frontend driver found for this B2C2/FlexCop adapter");
|
||||
return -ENODEV;
|
||||
|
||||
fe_found:
|
||||
info("found '%s' .", fc->fe->ops.info.name);
|
||||
if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
|
||||
err("frontend registration failed!");
|
||||
ops = &fc->fe->ops;
|
||||
if (ops->release != NULL)
|
||||
ops->release(fc->fe);
|
||||
fc->fe = NULL;
|
||||
return -EINVAL;
|
||||
}
|
||||
fc->init_state |= FC_STATE_FE_INIT;
|
||||
return 0;
|
||||
|
@ -9,6 +9,8 @@
|
||||
|
||||
#define FC_MAX_I2C_RETRIES 100000
|
||||
|
||||
/* #define DUMP_I2C_MESSAGES */
|
||||
|
||||
static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100)
|
||||
{
|
||||
int i;
|
||||
@ -38,30 +40,25 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r
|
||||
return -EREMOTEIO;
|
||||
}
|
||||
|
||||
static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
|
||||
static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
|
||||
flexcop_ibi_value r100, u8 *buf)
|
||||
{
|
||||
flexcop_ibi_value r104;
|
||||
int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
|
||||
ret;
|
||||
|
||||
if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
|
||||
/* The Cablestar needs a different kind of i2c-transfer (does not
|
||||
* support "Repeat Start"):
|
||||
* wait for the ACK failure,
|
||||
* and do a subsequent read with the Bit 30 enabled
|
||||
*/
|
||||
r100.tw_sm_c_100.no_base_addr_ack_error = 1;
|
||||
if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) {
|
||||
deb_i2c("no_base_addr read failed. %d\n",ret);
|
||||
return ret;
|
||||
}
|
||||
r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
|
||||
ret = flexcop_i2c_operation(i2c->fc, &r100);
|
||||
if (ret != 0) {
|
||||
deb_i2c("read failed. %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
buf[0] = r100.tw_sm_c_100.data1_reg;
|
||||
|
||||
if (len > 0) {
|
||||
r104 = fc->read_ibi_reg(fc,tw_sm_c_104);
|
||||
deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
|
||||
r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104);
|
||||
deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
|
||||
|
||||
/* there is at least one more byte, otherwise we wouldn't be here */
|
||||
buf[1] = r104.tw_sm_c_104.data2_reg;
|
||||
@ -85,17 +82,22 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100,
|
||||
r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
|
||||
r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
|
||||
|
||||
deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
|
||||
deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
|
||||
|
||||
/* write the additional i2c data before doing the actual i2c operation */
|
||||
fc->write_ibi_reg(fc,tw_sm_c_104,r104);
|
||||
return flexcop_i2c_operation(fc,&r100);
|
||||
fc->write_ibi_reg(fc, tw_sm_c_104, r104);
|
||||
return flexcop_i2c_operation(fc, &r100);
|
||||
}
|
||||
|
||||
int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
|
||||
flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
|
||||
int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
|
||||
flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
|
||||
{
|
||||
int ret;
|
||||
|
||||
#ifdef DUMP_I2C_MESSAGES
|
||||
int i;
|
||||
#endif
|
||||
|
||||
u16 bytes_to_transfer;
|
||||
flexcop_ibi_value r100;
|
||||
|
||||
@ -103,7 +105,25 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
|
||||
r100.raw = 0;
|
||||
r100.tw_sm_c_100.chipaddr = chipaddr;
|
||||
r100.tw_sm_c_100.twoWS_rw = op;
|
||||
r100.tw_sm_c_100.twoWS_port_reg = port;
|
||||
r100.tw_sm_c_100.twoWS_port_reg = i2c->port;
|
||||
|
||||
#ifdef DUMP_I2C_MESSAGES
|
||||
printk(KERN_DEBUG "%d ", i2c->port);
|
||||
if (op == FC_READ)
|
||||
printk("rd(");
|
||||
else
|
||||
printk("wr(");
|
||||
|
||||
printk("%02x): %02x ", chipaddr, addr);
|
||||
#endif
|
||||
|
||||
/* in that case addr is the only value ->
|
||||
* we write it twice as baseaddr and val0
|
||||
* BBTI is doing it like that for ISL6421 at least */
|
||||
if (i2c->no_base_addr && len == 0 && op == FC_WRITE) {
|
||||
buf = &addr;
|
||||
len = 1;
|
||||
}
|
||||
|
||||
while (len != 0) {
|
||||
bytes_to_transfer = len > 4 ? 4 : len;
|
||||
@ -112,9 +132,14 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
|
||||
r100.tw_sm_c_100.baseaddr = addr;
|
||||
|
||||
if (op == FC_READ)
|
||||
ret = flexcop_i2c_read4(fc, r100, buf);
|
||||
ret = flexcop_i2c_read4(i2c, r100, buf);
|
||||
else
|
||||
ret = flexcop_i2c_write4(fc,r100, buf);
|
||||
ret = flexcop_i2c_write4(i2c->fc, r100, buf);
|
||||
|
||||
#ifdef DUMP_I2C_MESSAGES
|
||||
for (i = 0; i < bytes_to_transfer; i++)
|
||||
printk("%02x ", buf[i]);
|
||||
#endif
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
@ -122,7 +147,11 @@ int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
|
||||
buf += bytes_to_transfer;
|
||||
addr += bytes_to_transfer;
|
||||
len -= bytes_to_transfer;
|
||||
};
|
||||
}
|
||||
|
||||
#ifdef DUMP_I2C_MESSAGES
|
||||
printk("\n");
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -132,7 +161,7 @@ EXPORT_SYMBOL(flexcop_i2c_request);
|
||||
/* master xfer callback for demodulator */
|
||||
static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
|
||||
{
|
||||
struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
|
||||
struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
|
||||
int i, ret = 0;
|
||||
|
||||
/* Some drivers use 1 byte or 0 byte reads as probes, which this
|
||||
@ -142,34 +171,29 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs
|
||||
if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1)
|
||||
return 1;
|
||||
|
||||
if (mutex_lock_interruptible(&fc->i2c_mutex))
|
||||
if (mutex_lock_interruptible(&i2c->fc->i2c_mutex))
|
||||
return -ERESTARTSYS;
|
||||
|
||||
/* reading */
|
||||
if (num == 2 &&
|
||||
msgs[0].flags == 0 &&
|
||||
msgs[1].flags == I2C_M_RD &&
|
||||
msgs[0].buf != NULL &&
|
||||
msgs[1].buf != NULL) {
|
||||
|
||||
ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
|
||||
|
||||
} else for (i = 0; i < num; i++) { /* writing command */
|
||||
if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) {
|
||||
ret = -EINVAL;
|
||||
for (i = 0; i < num; i++) {
|
||||
/* reading */
|
||||
if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
|
||||
ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
|
||||
msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len);
|
||||
i++; /* skip the following message */
|
||||
} else /* writing */
|
||||
ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
|
||||
msgs[i].buf[0], &msgs[i].buf[1],
|
||||
msgs[i].len - 1);
|
||||
if (ret < 0) {
|
||||
err("i2c master_xfer failed");
|
||||
break;
|
||||
}
|
||||
|
||||
ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
|
||||
}
|
||||
|
||||
if (ret < 0)
|
||||
err("i2c master_xfer failed");
|
||||
else
|
||||
mutex_unlock(&i2c->fc->i2c_mutex);
|
||||
|
||||
if (ret == 0)
|
||||
ret = num;
|
||||
|
||||
mutex_unlock(&fc->i2c_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -189,28 +213,68 @@ int flexcop_i2c_init(struct flexcop_device *fc)
|
||||
|
||||
mutex_init(&fc->i2c_mutex);
|
||||
|
||||
memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
|
||||
strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",
|
||||
sizeof(fc->i2c_adap.name));
|
||||
fc->fc_i2c_adap[0].fc = fc;
|
||||
fc->fc_i2c_adap[1].fc = fc;
|
||||
fc->fc_i2c_adap[2].fc = fc;
|
||||
|
||||
i2c_set_adapdata(&fc->i2c_adap,fc);
|
||||
fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
|
||||
fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
|
||||
fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
|
||||
|
||||
fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
|
||||
fc->i2c_adap.algo = &flexcop_algo;
|
||||
fc->i2c_adap.algo_data = NULL;
|
||||
fc->i2c_adap.dev.parent = fc->dev;
|
||||
strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
|
||||
"B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
|
||||
strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
|
||||
"B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
|
||||
strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
|
||||
"B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
|
||||
|
||||
if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
|
||||
i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
|
||||
i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
|
||||
i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]);
|
||||
|
||||
fc->fc_i2c_adap[0].i2c_adap.class =
|
||||
fc->fc_i2c_adap[1].i2c_adap.class =
|
||||
fc->fc_i2c_adap[2].i2c_adap.class = I2C_CLASS_TV_DIGITAL;
|
||||
fc->fc_i2c_adap[0].i2c_adap.algo =
|
||||
fc->fc_i2c_adap[1].i2c_adap.algo =
|
||||
fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo;
|
||||
fc->fc_i2c_adap[0].i2c_adap.algo_data =
|
||||
fc->fc_i2c_adap[1].i2c_adap.algo_data =
|
||||
fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL;
|
||||
fc->fc_i2c_adap[0].i2c_adap.dev.parent =
|
||||
fc->fc_i2c_adap[1].i2c_adap.dev.parent =
|
||||
fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev;
|
||||
|
||||
ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap);
|
||||
if (ret < 0)
|
||||
goto adap_1_failed;
|
||||
|
||||
ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap);
|
||||
if (ret < 0)
|
||||
goto adap_2_failed;
|
||||
|
||||
fc->init_state |= FC_STATE_I2C_INIT;
|
||||
return 0;
|
||||
|
||||
adap_2_failed:
|
||||
i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
|
||||
adap_1_failed:
|
||||
i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
void flexcop_i2c_exit(struct flexcop_device *fc)
|
||||
{
|
||||
if (fc->init_state & FC_STATE_I2C_INIT)
|
||||
i2c_del_adapter(&fc->i2c_adap);
|
||||
if (fc->init_state & FC_STATE_I2C_INIT) {
|
||||
i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap);
|
||||
i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
|
||||
i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
|
||||
}
|
||||
|
||||
fc->init_state &= ~FC_STATE_I2C_INIT;
|
||||
}
|
||||
|
@ -211,10 +211,11 @@ static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
|
||||
#endif
|
||||
|
||||
/* usb i2c stuff */
|
||||
static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb,
|
||||
static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
|
||||
flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
|
||||
flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
|
||||
u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
|
||||
{
|
||||
struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
|
||||
u16 wValue, wIndex;
|
||||
int nWaitTime,pipe,len;
|
||||
// u8 dwRequestType;
|
||||
@ -242,7 +243,7 @@ static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb,
|
||||
deb_info("unsupported function for i2c_req %x\n",func);
|
||||
return -EINVAL;
|
||||
}
|
||||
wValue = (func << 8 ) | (port << 4);
|
||||
wValue = (func << 8) | (i2c->port << 4);
|
||||
wIndex = (chipaddr << 8 ) | addr;
|
||||
|
||||
deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
|
||||
@ -274,13 +275,15 @@ static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_regi
|
||||
return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0);
|
||||
}
|
||||
|
||||
static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
|
||||
flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
|
||||
static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
|
||||
flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
|
||||
{
|
||||
if (op == FC_READ)
|
||||
return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len);
|
||||
return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
|
||||
USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
|
||||
else
|
||||
return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len);
|
||||
return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
|
||||
USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
|
||||
}
|
||||
|
||||
static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length)
|
||||
|
@ -257,6 +257,12 @@ int flexcop_device_initialize(struct flexcop_device *fc)
|
||||
if ((ret = flexcop_dvb_init(fc)))
|
||||
goto error;
|
||||
|
||||
/* i2c has to be done before doing EEProm stuff -
|
||||
* because the EEProm is accessed via i2c */
|
||||
ret = flexcop_i2c_init(fc);
|
||||
if (ret)
|
||||
goto error;
|
||||
|
||||
/* do the MAC address reading after initializing the dvb_adapter */
|
||||
if (fc->get_mac_addr(fc, 0) == 0) {
|
||||
u8 *b = fc->dvb_adapter.proposed_mac;
|
||||
@ -266,10 +272,6 @@ int flexcop_device_initialize(struct flexcop_device *fc)
|
||||
} else
|
||||
warn("reading of MAC address failed.\n");
|
||||
|
||||
|
||||
if ((ret = flexcop_i2c_init(fc)))
|
||||
goto error;
|
||||
|
||||
if ((ret = flexcop_frontend_init(fc)))
|
||||
goto error;
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user