MIPS: RB532: Cleanup the headers again

This patch cleans up headers and regroups informations to
where they should reside. While moving, try to have a
consistant naming for defines.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Florian Fainelli 2008-08-23 18:53:50 +02:00 committed by Ralf Baechle
parent deeb45ac4a
commit 606a083b1e
6 changed files with 28 additions and 36 deletions

View File

@ -45,7 +45,7 @@
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/irq.h>
struct intr_group {
u32 mask; /* mask of valid bits in pending/mask registers */

View File

@ -31,16 +31,16 @@
#include <linux/serial_8250.h>
#include <asm/serial.h>
#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/rb.h>
extern unsigned int idt_cpu_freq;
static struct uart_port rb532_uart = {
.type = PORT_16550A,
.line = 0,
.irq = RC32434_UART0_IRQ,
.irq = UART0_IRQ,
.iotype = UPIO_MEM,
.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
.membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
.regshift = 2
};

View File

@ -9,7 +9,7 @@
#include <asm/time.h>
#include <linux/ioport.h>
#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/pci.h>
struct pci_reg __iomem *pci_reg;
@ -27,7 +27,7 @@ static struct resource pci0_res[] = {
static void rb_machine_restart(char *command)
{
/* just jump to the reset vector */
writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
writel(0x80000001, IDT434_REG_BASE + RST);
((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
}

View File

@ -4,6 +4,26 @@
#define NR_IRQS 256
#include <asm/mach-generic/irq.h>
#include <asm/mach-rc32434/rb.h>
/* Interrupt Controller */
#define IC_GROUP0_PEND (REGBASE + 0x38000)
#define IC_GROUP0_MASK (REGBASE + 0x38008)
#define IC_GROUP_OFFSET 0x0C
#define NUM_INTR_GROUPS 5
/* 16550 UARTs */
#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
/* GRP3 IRQ numbers start here */
#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
/* GRP4 IRQ numbers start here */
#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
/* GRP5 IRQ numbers start here */
#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
#define UART0_IRQ (GROUP3_IRQ_BASE + 0)
#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)

View File

@ -19,6 +19,8 @@
#define REGBASE 0x18000000
#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE))
#define UART0BASE 0x58000
#define RST (1 << 15)
#define DEV0BASE 0x010000
#define DEV0MASK 0x010004
#define DEV0C 0x010008

View File

@ -8,37 +8,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#define RC32434_REG_BASE 0x18000000
#define RC32434_RST (1 << 15)
#define IDT_CLOCK_MULT 2
#define MIPS_CPU_TIMER_IRQ 7
/* Interrupt Controller */
#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000)
#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008)
#define IC_GROUP_OFFSET 0x0C
#define NUM_INTR_GROUPS 5
/* 16550 UARTs */
#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
/* GRP3 IRQ numbers start here */
#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
/* GRP4 IRQ numbers start here */
#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
/* GRP5 IRQ numbers start here */
#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
#ifdef __MIPSEB__
#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003)
#else
#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000)
#endif
#define RC32434_UART0_IRQ (GROUP3_IRQ_BASE + 0)
/* cpu pipeline flush */
static inline void rc32434_sync(void)