forked from Minki/linux
bus: add driver for the Technologic Systems NBUS
This driver implements a GPIOs bit-banged bus, called the NBUS by Technologic Systems. It is used to communicate with the peripherals in the FPGA on the TS-4600 SoM. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Sebastien Bourdelin
Arnd Bergmann
parent
d771d62e31
commit
5b143d2a6e
@ -157,6 +157,14 @@ config TEGRA_GMI
|
||||
Driver for the Tegra Generic Memory Interface bus which can be used
|
||||
to attach devices such as NOR, UART, FPGA and more.
|
||||
|
||||
config TS_NBUS
|
||||
tristate "Technologic Systems NBUS Driver"
|
||||
depends on SOC_IMX28
|
||||
depends on OF_GPIO && PWM
|
||||
help
|
||||
Driver for the Technologic Systems NBUS which is used to interface
|
||||
with the peripherals in the FPGA of the TS-4600 SoM.
|
||||
|
||||
config UNIPHIER_SYSTEM_BUS
|
||||
tristate "UniPhier System Bus driver"
|
||||
depends on ARCH_UNIPHIER && OF
|
||||
|
||||
@ -20,6 +20,7 @@ obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
|
||||
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
|
||||
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
|
||||
obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
|
||||
obj-$(CONFIG_TS_NBUS) += ts-nbus.o
|
||||
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
|
||||
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
|
||||
|
||||
|
||||
375
drivers/bus/ts-nbus.c
Normal file
375
drivers/bus/ts-nbus.c
Normal file
@ -0,0 +1,375 @@
|
||||
/*
|
||||
* NBUS driver for TS-4600 based boards
|
||||
*
|
||||
* Copyright (c) 2016 - Savoir-faire Linux
|
||||
* Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*
|
||||
* This driver implements a GPIOs bit-banged bus, called the NBUS by Technologic
|
||||
* Systems. It is used to communicate with the peripherals in the FPGA on the
|
||||
* TS-4600 SoM.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/ts-nbus.h>
|
||||
|
||||
#define TS_NBUS_DIRECTION_IN 0
|
||||
#define TS_NBUS_DIRECTION_OUT 1
|
||||
#define TS_NBUS_WRITE_ADR 0
|
||||
#define TS_NBUS_WRITE_VAL 1
|
||||
|
||||
struct ts_nbus {
|
||||
struct pwm_device *pwm;
|
||||
struct gpio_descs *data;
|
||||
struct gpio_desc *csn;
|
||||
struct gpio_desc *txrx;
|
||||
struct gpio_desc *strobe;
|
||||
struct gpio_desc *ale;
|
||||
struct gpio_desc *rdy;
|
||||
struct mutex lock;
|
||||
};
|
||||
|
||||
/*
|
||||
* request all gpios required by the bus.
|
||||
*/
|
||||
static int ts_nbus_init_pdata(struct platform_device *pdev, struct ts_nbus
|
||||
*ts_nbus)
|
||||
{
|
||||
ts_nbus->data = devm_gpiod_get_array(&pdev->dev, "ts,data",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ts_nbus->data)) {
|
||||
dev_err(&pdev->dev, "failed to retrieve ts,data-gpio from dts\n");
|
||||
return PTR_ERR(ts_nbus->data);
|
||||
}
|
||||
|
||||
ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ts_nbus->csn)) {
|
||||
dev_err(&pdev->dev, "failed to retrieve ts,csn-gpio from dts\n");
|
||||
return PTR_ERR(ts_nbus->csn);
|
||||
}
|
||||
|
||||
ts_nbus->txrx = devm_gpiod_get(&pdev->dev, "ts,txrx", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ts_nbus->txrx)) {
|
||||
dev_err(&pdev->dev, "failed to retrieve ts,txrx-gpio from dts\n");
|
||||
return PTR_ERR(ts_nbus->txrx);
|
||||
}
|
||||
|
||||
ts_nbus->strobe = devm_gpiod_get(&pdev->dev, "ts,strobe", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ts_nbus->strobe)) {
|
||||
dev_err(&pdev->dev, "failed to retrieve ts,strobe-gpio from dts\n");
|
||||
return PTR_ERR(ts_nbus->strobe);
|
||||
}
|
||||
|
||||
ts_nbus->ale = devm_gpiod_get(&pdev->dev, "ts,ale", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(ts_nbus->ale)) {
|
||||
dev_err(&pdev->dev, "failed to retrieve ts,ale-gpio from dts\n");
|
||||
return PTR_ERR(ts_nbus->ale);
|
||||
}
|
||||
|
||||
ts_nbus->rdy = devm_gpiod_get(&pdev->dev, "ts,rdy", GPIOD_IN);
|
||||
if (IS_ERR(ts_nbus->rdy)) {
|
||||
dev_err(&pdev->dev, "failed to retrieve ts,rdy-gpio from dts\n");
|
||||
return PTR_ERR(ts_nbus->rdy);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* the data gpios are used for reading and writing values, their directions
|
||||
* should be adjusted accordingly.
|
||||
*/
|
||||
static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (direction == TS_NBUS_DIRECTION_IN)
|
||||
gpiod_direction_input(ts_nbus->data->desc[i]);
|
||||
else
|
||||
/* when used as output the default state of the data
|
||||
* lines are set to high */
|
||||
gpiod_direction_output(ts_nbus->data->desc[i], 1);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* reset the bus in its initial state.
|
||||
* The data, csn, strobe and ale lines must be zero'ed to let the FPGA knows a
|
||||
* new transaction can be process.
|
||||
*/
|
||||
static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
|
||||
{
|
||||
int i;
|
||||
int values[8];
|
||||
|
||||
for (i = 0; i < 8; i++)
|
||||
values[i] = 0;
|
||||
|
||||
gpiod_set_array_value_cansleep(8, ts_nbus->data->desc, values);
|
||||
gpiod_set_value_cansleep(ts_nbus->csn, 0);
|
||||
gpiod_set_value_cansleep(ts_nbus->strobe, 0);
|
||||
gpiod_set_value_cansleep(ts_nbus->ale, 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* let the FPGA knows it can process.
|
||||
*/
|
||||
static void ts_nbus_start_transaction(struct ts_nbus *ts_nbus)
|
||||
{
|
||||
gpiod_set_value_cansleep(ts_nbus->strobe, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* read a byte value from the data gpios.
|
||||
* return 0 on success or negative errno on failure.
|
||||
*/
|
||||
static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
|
||||
{
|
||||
struct gpio_descs *gpios = ts_nbus->data;
|
||||
int ret, i;
|
||||
|
||||
*val = 0;
|
||||
for (i = 0; i < 8; i++) {
|
||||
ret = gpiod_get_value_cansleep(gpios->desc[i]);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (ret)
|
||||
*val |= BIT(i);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* set the data gpios accordingly to the byte value.
|
||||
*/
|
||||
static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
|
||||
{
|
||||
struct gpio_descs *gpios = ts_nbus->data;
|
||||
int i;
|
||||
int values[8];
|
||||
|
||||
for (i = 0; i < 8; i++)
|
||||
if (byte & BIT(i))
|
||||
values[i] = 1;
|
||||
else
|
||||
values[i] = 0;
|
||||
|
||||
gpiod_set_array_value_cansleep(8, gpios->desc, values);
|
||||
}
|
||||
|
||||
/*
|
||||
* reading the bus consists of resetting the bus, then notifying the FPGA to
|
||||
* send the data in the data gpios and return the read value.
|
||||
* return 0 on success or negative errno on failure.
|
||||
*/
|
||||
static int ts_nbus_read_bus(struct ts_nbus *ts_nbus, u8 *val)
|
||||
{
|
||||
ts_nbus_reset_bus(ts_nbus);
|
||||
ts_nbus_start_transaction(ts_nbus);
|
||||
|
||||
return ts_nbus_read_byte(ts_nbus, val);
|
||||
}
|
||||
|
||||
/*
|
||||
* writing to the bus consists of resetting the bus, then define the type of
|
||||
* command (address/value), write the data and notify the FPGA to retrieve the
|
||||
* value in the data gpios.
|
||||
*/
|
||||
static void ts_nbus_write_bus(struct ts_nbus *ts_nbus, int cmd, u8 val)
|
||||
{
|
||||
ts_nbus_reset_bus(ts_nbus);
|
||||
|
||||
if (cmd == TS_NBUS_WRITE_ADR)
|
||||
gpiod_set_value_cansleep(ts_nbus->ale, 1);
|
||||
|
||||
ts_nbus_write_byte(ts_nbus, val);
|
||||
ts_nbus_start_transaction(ts_nbus);
|
||||
}
|
||||
|
||||
/*
|
||||
* read the value in the FPGA register at the given address.
|
||||
* return 0 on success or negative errno on failure.
|
||||
*/
|
||||
int ts_nbus_read(struct ts_nbus *ts_nbus, u8 adr, u16 *val)
|
||||
{
|
||||
int ret, i;
|
||||
u8 byte;
|
||||
|
||||
/* bus access must be atomic */
|
||||
mutex_lock(&ts_nbus->lock);
|
||||
|
||||
/* set the bus in read mode */
|
||||
gpiod_set_value_cansleep(ts_nbus->txrx, 0);
|
||||
|
||||
/* write address */
|
||||
ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_ADR, adr);
|
||||
|
||||
/* set the data gpios direction as input before reading */
|
||||
ts_nbus_set_direction(ts_nbus, TS_NBUS_DIRECTION_IN);
|
||||
|
||||
/* reading value MSB first */
|
||||
do {
|
||||
*val = 0;
|
||||
byte = 0;
|
||||
for (i = 1; i >= 0; i--) {
|
||||
/* read a byte from the bus, leave on error */
|
||||
ret = ts_nbus_read_bus(ts_nbus, &byte);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
/* append the byte read to the final value */
|
||||
*val |= byte << (i * 8);
|
||||
}
|
||||
gpiod_set_value_cansleep(ts_nbus->csn, 1);
|
||||
ret = gpiod_get_value_cansleep(ts_nbus->rdy);
|
||||
} while (ret);
|
||||
|
||||
err:
|
||||
/* restore the data gpios direction as output after reading */
|
||||
ts_nbus_set_direction(ts_nbus, TS_NBUS_DIRECTION_OUT);
|
||||
|
||||
mutex_unlock(&ts_nbus->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ts_nbus_read);
|
||||
|
||||
/*
|
||||
* write the desired value in the FPGA register at the given address.
|
||||
*/
|
||||
int ts_nbus_write(struct ts_nbus *ts_nbus, u8 adr, u16 val)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* bus access must be atomic */
|
||||
mutex_lock(&ts_nbus->lock);
|
||||
|
||||
/* set the bus in write mode */
|
||||
gpiod_set_value_cansleep(ts_nbus->txrx, 1);
|
||||
|
||||
/* write address */
|
||||
ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_ADR, adr);
|
||||
|
||||
/* writing value MSB first */
|
||||
for (i = 1; i >= 0; i--)
|
||||
ts_nbus_write_bus(ts_nbus, TS_NBUS_WRITE_VAL, (u8)(val >> (i * 8)));
|
||||
|
||||
/* wait for completion */
|
||||
gpiod_set_value_cansleep(ts_nbus->csn, 1);
|
||||
while (gpiod_get_value_cansleep(ts_nbus->rdy) != 0) {
|
||||
gpiod_set_value_cansleep(ts_nbus->csn, 0);
|
||||
gpiod_set_value_cansleep(ts_nbus->csn, 1);
|
||||
}
|
||||
|
||||
mutex_unlock(&ts_nbus->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ts_nbus_write);
|
||||
|
||||
static int ts_nbus_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct pwm_device *pwm;
|
||||
struct pwm_args pargs;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct ts_nbus *ts_nbus;
|
||||
int ret;
|
||||
|
||||
ts_nbus = devm_kzalloc(dev, sizeof(*ts_nbus), GFP_KERNEL);
|
||||
if (!ts_nbus)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&ts_nbus->lock);
|
||||
|
||||
ret = ts_nbus_init_pdata(pdev, ts_nbus);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
pwm = devm_pwm_get(dev, NULL);
|
||||
if (IS_ERR(pwm)) {
|
||||
ret = PTR_ERR(pwm);
|
||||
if (ret != -EPROBE_DEFER)
|
||||
dev_err(dev, "unable to request PWM\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
pwm_get_args(pwm, &pargs);
|
||||
if (!pargs.period) {
|
||||
dev_err(&pdev->dev, "invalid PWM period\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* FIXME: pwm_apply_args() should be removed when switching to
|
||||
* the atomic PWM API.
|
||||
*/
|
||||
pwm_apply_args(pwm);
|
||||
ret = pwm_config(pwm, pargs.period, pargs.period);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* we can now start the FPGA and populate the peripherals.
|
||||
*/
|
||||
pwm_enable(pwm);
|
||||
ts_nbus->pwm = pwm;
|
||||
|
||||
/*
|
||||
* let the child nodes retrieve this instance of the ts-nbus.
|
||||
*/
|
||||
dev_set_drvdata(dev, ts_nbus);
|
||||
|
||||
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
dev_info(dev, "initialized\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ts_nbus_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ts_nbus *ts_nbus = dev_get_drvdata(&pdev->dev);
|
||||
|
||||
/* shutdown the FPGA */
|
||||
mutex_lock(&ts_nbus->lock);
|
||||
pwm_disable(ts_nbus->pwm);
|
||||
mutex_unlock(&ts_nbus->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id ts_nbus_of_match[] = {
|
||||
{ .compatible = "technologic,ts-nbus", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ts_nbus_of_match);
|
||||
|
||||
static struct platform_driver ts_nbus_driver = {
|
||||
.probe = ts_nbus_probe,
|
||||
.remove = ts_nbus_remove,
|
||||
.driver = {
|
||||
.name = "ts_nbus",
|
||||
.of_match_table = ts_nbus_of_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(ts_nbus_driver);
|
||||
|
||||
MODULE_ALIAS("platform:ts_nbus");
|
||||
MODULE_AUTHOR("Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>");
|
||||
MODULE_DESCRIPTION("Technologic Systems NBUS");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
18
include/linux/ts-nbus.h
Normal file
18
include/linux/ts-nbus.h
Normal file
@ -0,0 +1,18 @@
|
||||
/*
|
||||
* Copyright (c) 2016 - Savoir-faire Linux
|
||||
* Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#ifndef _TS_NBUS_H
|
||||
#define _TS_NBUS_H
|
||||
|
||||
struct ts_nbus;
|
||||
|
||||
extern int ts_nbus_read(struct ts_nbus *ts_nbus, u8 adr, u16 *val);
|
||||
extern int ts_nbus_write(struct ts_nbus *ts_nbus, u8 adr, u16 val);
|
||||
|
||||
#endif /* _TS_NBUS_H */
|
||||
Loading…
Reference in New Issue
Block a user