From 5ae4cb94b3133d00857bb2909dae779782db40cb Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Fri, 7 Apr 2017 22:29:01 +0930 Subject: [PATCH] gpio: aspeed: Add debounce support Each GPIO in the Aspeed GPIO controller can choose one of four input debounce states: to disable debouncing for an input, or select from one of three programmable debounce timer values. Each GPIO in a four-bank-set is assigned one bit in each of two debounce configuration registers dedicated to the set, and selects a debounce state by configuring the two bits to select one of the four options. The limitation on debounce timer values is managed by mapping offsets onto a configured timer value and keeping count of the number of users a timer has. Timer values are configured on a first-come-first-served basis. A small twist in the hardware design is that the debounce configuration register numbering is reversed with respect to the binary representation of the debounce timer of interest (i.e. debounce register 1 represents bit 1, and debounce register 2 represents bit 0 of the timer numbering). Tested on an AST2500EVB with additional inspection under QEMU's romulus-bmc machine. Signed-off-by: Andrew Jeffery Signed-off-by: Linus Walleij --- drivers/gpio/gpio-aspeed.c | 281 ++++++++++++++++++++++++++++++++++++- 1 file changed, 276 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index fb16cc771c0d..3327a48df862 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -9,14 +9,18 @@ * 2 of the License, or (at your option) any later version. */ -#include -#include +#include +#include +#include +#include #include #include -#include -#include -#include +#include +#include #include +#include +#include +#include struct aspeed_bank_props { unsigned int bank; @@ -29,59 +33,85 @@ struct aspeed_gpio_config { const struct aspeed_bank_props *props; }; +/* + * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled + * @timer_users: Tracks the number of users for each timer + * + * The @timer_users has four elements but the first element is unused. This is + * to simplify accounting and indexing, as a zero value in @offset_timer + * represents disabled debouncing for the GPIO. Any other value for an element + * of @offset_timer is used as an index into @timer_users. This behaviour of + * the zero value aligns with the behaviour of zero built from the timer + * configuration registers (i.e. debouncing is disabled). + */ struct aspeed_gpio { struct gpio_chip chip; spinlock_t lock; void __iomem *base; int irq; const struct aspeed_gpio_config *config; + + u8 *offset_timer; + unsigned int timer_users[4]; + struct clk *clk; }; struct aspeed_gpio_bank { uint16_t val_regs; uint16_t irq_regs; + uint16_t debounce_regs; const char names[4][3]; }; +static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 }; + static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { { .val_regs = 0x0000, .irq_regs = 0x0008, + .debounce_regs = 0x0040, .names = { "A", "B", "C", "D" }, }, { .val_regs = 0x0020, .irq_regs = 0x0028, + .debounce_regs = 0x0048, .names = { "E", "F", "G", "H" }, }, { .val_regs = 0x0070, .irq_regs = 0x0098, + .debounce_regs = 0x00b0, .names = { "I", "J", "K", "L" }, }, { .val_regs = 0x0078, .irq_regs = 0x00e8, + .debounce_regs = 0x0100, .names = { "M", "N", "O", "P" }, }, { .val_regs = 0x0080, .irq_regs = 0x0118, + .debounce_regs = 0x0130, .names = { "Q", "R", "S", "T" }, }, { .val_regs = 0x0088, .irq_regs = 0x0148, + .debounce_regs = 0x0160, .names = { "U", "V", "W", "X" }, }, { .val_regs = 0x01E0, .irq_regs = 0x0178, + .debounce_regs = 0x0190, .names = { "Y", "Z", "AA", "AB" }, }, { .val_regs = 0x01E8, .irq_regs = 0x01A8, + .debounce_regs = 0x01c0, .names = { "AC", "", "", "" }, }, }; @@ -99,6 +129,13 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { #define GPIO_IRQ_TYPE2 0x0c #define GPIO_IRQ_STATUS 0x10 +#define GPIO_DEBOUNCE_SEL1 0x00 +#define GPIO_DEBOUNCE_SEL2 0x04 + +#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o)) +#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1) +#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0) + static const struct aspeed_gpio_bank *to_bank(unsigned int offset) { unsigned int bank = GPIO_BANK(offset); @@ -144,6 +181,7 @@ static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset) } #define have_irq(g, o) have_input((g), (o)) +#define have_debounce(g, o) have_input((g), (o)) static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset) { @@ -506,6 +544,227 @@ static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset) pinctrl_free_gpio(chip->base + offset); } +static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio, + const struct aspeed_gpio_bank *bank, + unsigned int reg) +{ + return gpio->base + bank->debounce_regs + reg; +} + +static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs, + u32 *cycles) +{ + u64 rate; + u64 n; + u32 r; + + rate = clk_get_rate(gpio->clk); + if (!rate) + return -ENOTSUPP; + + n = rate * usecs; + r = do_div(n, 1000000); + + if (n >= U32_MAX) + return -ERANGE; + + /* At least as long as the requested time */ + *cycles = n + (!!r); + + return 0; +} + +/* Call under gpio->lock */ +static int register_allocated_timer(struct aspeed_gpio *gpio, + unsigned int offset, unsigned int timer) +{ + if (WARN(gpio->offset_timer[offset] != 0, + "Offset %d already allocated timer %d\n", + offset, gpio->offset_timer[offset])) + return -EINVAL; + + if (WARN(gpio->timer_users[timer] == UINT_MAX, + "Timer user count would overflow\n")) + return -EPERM; + + gpio->offset_timer[offset] = timer; + gpio->timer_users[timer]++; + + return 0; +} + +/* Call under gpio->lock */ +static int unregister_allocated_timer(struct aspeed_gpio *gpio, + unsigned int offset) +{ + if (WARN(gpio->offset_timer[offset] == 0, + "No timer allocated to offset %d\n", offset)) + return -EINVAL; + + if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0, + "No users recorded for timer %d\n", + gpio->offset_timer[offset])) + return -EINVAL; + + gpio->timer_users[gpio->offset_timer[offset]]--; + gpio->offset_timer[offset] = 0; + + return 0; +} + +/* Call under gpio->lock */ +static inline bool timer_allocation_registered(struct aspeed_gpio *gpio, + unsigned int offset) +{ + return gpio->offset_timer[offset] > 0; +} + +/* Call under gpio->lock */ +static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset, + unsigned int timer) +{ + const struct aspeed_gpio_bank *bank = to_bank(offset); + const u32 mask = GPIO_BIT(offset); + void __iomem *addr; + u32 val; + + addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1); + val = ioread32(addr); + iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr); + + addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2); + val = ioread32(addr); + iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr); +} + +static int enable_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned long usecs) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + u32 requested_cycles; + unsigned long flags; + int rc; + int i; + + rc = usecs_to_cycles(gpio, usecs, &requested_cycles); + if (rc < 0) { + dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n", + usecs, clk_get_rate(gpio->clk), rc); + return rc; + } + + spin_lock_irqsave(&gpio->lock, flags); + + if (timer_allocation_registered(gpio, offset)) { + rc = unregister_allocated_timer(gpio, offset); + if (rc < 0) + goto out; + } + + /* Try to find a timer already configured for the debounce period */ + for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) { + u32 cycles; + + cycles = ioread32(gpio->base + debounce_timers[i]); + if (requested_cycles == cycles) + break; + } + + if (i == ARRAY_SIZE(debounce_timers)) { + int j; + + /* + * As there are no timers configured for the requested debounce + * period, find an unused timer instead + */ + for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) { + if (gpio->timer_users[j] == 0) + break; + } + + if (j == ARRAY_SIZE(gpio->timer_users)) { + dev_warn(chip->parent, + "Debounce timers exhausted, cannot debounce for period %luus\n", + usecs); + + rc = -EPERM; + + /* + * We already adjusted the accounting to remove @offset + * as a user of its previous timer, so also configure + * the hardware so @offset has timers disabled for + * consistency. + */ + configure_timer(gpio, offset, 0); + goto out; + } + + i = j; + + iowrite32(requested_cycles, gpio->base + debounce_timers[i]); + } + + if (WARN(i == 0, "Cannot register index of disabled timer\n")) { + rc = -EINVAL; + goto out; + } + + register_allocated_timer(gpio, offset, i); + configure_timer(gpio, offset, i); + +out: + spin_unlock_irqrestore(&gpio->lock, flags); + + return rc; +} + +static int disable_debounce(struct gpio_chip *chip, unsigned int offset) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + unsigned long flags; + int rc; + + spin_lock_irqsave(&gpio->lock, flags); + + rc = unregister_allocated_timer(gpio, offset); + if (!rc) + configure_timer(gpio, offset, 0); + + spin_unlock_irqrestore(&gpio->lock, flags); + + return rc; +} + +static int set_debounce(struct gpio_chip *chip, unsigned int offset, + unsigned long usecs) +{ + struct aspeed_gpio *gpio = gpiochip_get_data(chip); + + if (!have_debounce(gpio, offset)) + return -ENOTSUPP; + + if (usecs) + return enable_debounce(chip, offset, usecs); + + return disable_debounce(chip, offset); +} + +static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + unsigned long param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + if (param == PIN_CONFIG_INPUT_DEBOUNCE) + return set_debounce(chip, offset, arg); + else if (param == PIN_CONFIG_BIAS_DISABLE || + param == PIN_CONFIG_BIAS_PULL_DOWN || + param == PIN_CONFIG_DRIVE_STRENGTH) + return pinctrl_gpio_set_config(offset, config); + + return -ENOTSUPP; +} + /* * Any banks not specified in a struct aspeed_bank_props array are assumed to * have the properties: @@ -565,8 +824,16 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) if (!gpio_id) return -EINVAL; + gpio->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(gpio->clk)) { + dev_warn(&pdev->dev, + "No HPLL clock phandle provided, debouncing disabled\n"); + gpio->clk = NULL; + } + gpio->config = gpio_id->data; + gpio->chip.parent = &pdev->dev; gpio->chip.ngpio = gpio->config->nr_gpios; gpio->chip.parent = &pdev->dev; gpio->chip.direction_input = aspeed_gpio_dir_in; @@ -576,6 +843,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) gpio->chip.free = aspeed_gpio_free; gpio->chip.get = aspeed_gpio_get; gpio->chip.set = aspeed_gpio_set; + gpio->chip.set_config = aspeed_gpio_set_config; gpio->chip.label = dev_name(&pdev->dev); gpio->chip.base = -1; gpio->chip.irq_need_valid_mask = true; @@ -584,6 +852,9 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) if (rc < 0) return rc; + gpio->offset_timer = + devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL); + return aspeed_gpio_setup_irqs(gpio, pdev); }