leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: OMAP2+: Remove legacy booting support for n8x0

Browse Source 
Now we can boot n8x with the appended device tree with:

$ ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make omap2420-n800.dtb
$ cat arch/arm/boot/zImage arch/arm/boot/dts/omap2420-n800.dtb > /tmp/zImage

Note that you need at least the following enabled:

CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y

Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2013-11-25 15:17:11 -08:00
parent fa590c9234
commit 5a87cde490
2 changed files with 0 additions and 227 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

158
arch/arm/mach-omap2/board-n8x0.c
View File

@ -21,7 +21,6 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/i2c-cbus-gpio.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/mfd/menelaus.h>
@ -33,7 +32,6 @@
#include "common.h"
#include "mmc.h"
#include "soc.h"
#include "mux.h"
#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
@ -61,58 +59,12 @@ static void board_check_revision(void)
board_caps = NOKIA_N810;
else if (of_machine_is_compatible("nokia,n810-wimax"))
board_caps = NOKIA_N810_WIMAX;
} else {
if (machine_is_nokia_n800())
board_caps = NOKIA_N800;
else if (machine_is_nokia_n810())
board_caps = NOKIA_N810;
else if (machine_is_nokia_n810_wimax())
board_caps = NOKIA_N810_WIMAX;
}
if (!board_caps)
pr_err("Unknown board\n");
}
#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
static struct i2c_cbus_platform_data n8x0_cbus_data = {
.clk_gpio = 66,
.dat_gpio = 65,
.sel_gpio = 64,
};
static struct platform_device n8x0_cbus_device = {
.name = "i2c-cbus-gpio",
.id = 3,
.dev = {
.platform_data = &n8x0_cbus_data,
},
};
static struct i2c_board_info n8x0_i2c_board_info_3[] __initdata = {
{
I2C_BOARD_INFO("retu-mfd", 0x01),
},
};
static void __init n8x0_cbus_init(void)
{
const int retu_irq_gpio = 108;
if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
return;
irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
n8x0_i2c_board_info_3[0].irq = gpio_to_irq(retu_irq_gpio);
i2c_register_board_info(3, n8x0_i2c_board_info_3,
ARRAY_SIZE(n8x0_i2c_board_info_3));
platform_device_register(&n8x0_cbus_device);
}
#else /* CONFIG_I2C_CBUS_GPIO */
static void __init n8x0_cbus_init(void)
{
}
#endif /* CONFIG_I2C_CBUS_GPIO */
#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/*
* Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
@ -598,8 +550,6 @@ static void __init n8x0_mmc_init(void)
mmc1_data.nr_slots = 2;
mmc_data[0] = &mmc1_data;
if (!of_have_populated_dt())
omap242x_init_mmc(mmc_data);
}
#else
static struct omap_mmc_platform_data mmc1_data;
@ -684,54 +634,6 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
},
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_MUX_MODE0,
.idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */
},
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
omap_serial_init_port(&bdata, NULL);
bdata.id = 1;
omap_serial_init_port(&bdata, NULL);
bdata.id = 2;
bdata.pads = serial2_pads;
bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
omap_serial_init_port(&bdata, NULL);
}
#else
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
static int __init n8x0_late_initcall(void)
{
if (!board_caps)
@ -740,8 +642,6 @@ static int __init n8x0_late_initcall(void)
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
if (!of_have_populated_dt())
n8x0_cbus_init();
return 0;
}
@ -764,61 +664,3 @@ void * __init n8x0_legacy_init(void)
return &mmc1_data;
}
static void __init n8x0_init_machine(void)
{
board_check_revision();
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
omap_register_i2c_bus(2, 400, NULL, 0);
if (board_is_n810())
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
if (!of_have_populated_dt()) {
board_serial_init();
omap_sdrc_init(NULL, NULL);
}
}
MACHINE_START(NOKIA_N800, "Nokia N800")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.init_time = omap2_sync32k_timer_init,
.restart = omap2xxx_restart,
MACHINE_END

69
arch/arm/mach-omap2/msdi.c
View File

@ -88,72 +88,3 @@ int omap_msdi_reset(struct omap_hwmod *oh)
return 0;
}
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
*mmc_controller)
{
if ((mmc_controller->slots[0].switch_pin > 0) && \
(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
if ((mmc_controller->slots[0].gpio_wp > 0) && \
(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc_cmd", 0);
omap_mux_init_signal("sdmmc_clki", 0);
omap_mux_init_signal("sdmmc_clko", 0);
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
omap_mux_init_signal("sdmmc_dat_dir1", 0);
omap_mux_init_signal("sdmmc_dat_dir2", 0);
omap_mux_init_signal("sdmmc_dat_dir3", 0);
}
/*
* Use internal loop-back in MMC/SDIO Module Input Clock
* selection
*/
if (mmc_controller->slots[0].internal_clock) {
u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24);
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
struct platform_device *pdev;
struct omap_hwmod *oh;
int id = 0;
char *oh_name = "msdi1";
char *dev_name = "mmci-omap";
if (!mmc_data[0]) {
pr_err("%s fails: Incomplete platform data\n", __func__);
return;
}
omap242x_mmc_mux(mmc_data[0]);
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
return;
}
pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
sizeof(struct omap_mmc_platform_data));
if (IS_ERR(pdev))
WARN(1, "Can'd build omap_device for %s:%s.\n",
dev_name, oh->name);
}
#endif