Merge branches 'for-next/acpi', 'for-next/boot', 'for-next/bpf', 'for-next/cpuinfo', 'for-next/fpsimd', 'for-next/misc', 'for-next/mm', 'for-next/pci', 'for-next/perf', 'for-next/ptrauth', 'for-next/sdei', 'for-next/selftests', 'for-next/stacktrace', 'for-next/svm', 'for-next/topology', 'for-next/tpyos' and 'for-next/vdso' into for-next/core

Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
  ACPI/IORT: Remove the unused inline functions
  ACPI/IORT: Drop the unused @ops of iort_add_device_replay()

Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
  Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
  arm64/relocate_kernel: remove redundant code

Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
  arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM

Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
  arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions

Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
  arm64/sve: Implement a helper to load SVE registers from FPSIMD state
  arm64/sve: Implement a helper to flush SVE registers
  arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
  arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
  arm64/signal: Update the comment in preserve_sve_context
  arm64/fpsimd: Update documentation of do_sve_acc

Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
  arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
  arm64: mm: Fix missing-prototypes in pageattr.c
  arm64/fpsimd: Fix missing-prototypes in fpsimd.c
  arm64: hibernate: Remove unused including <linux/version.h>
  arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
  arm64: Remove the unused include statements
  arm64: get rid of TEXT_OFFSET
  arm64: traps: Add str of description to panic() in die()

Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
  arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
  arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
  arm64/mm: Unify CONT_PMD_SHIFT
  arm64/mm: Unify CONT_PTE_SHIFT
  arm64/mm: Remove CONT_RANGE_OFFSET
  arm64/mm: Enable THP migration
  arm64/mm: Change THP helpers to comply with generic MM semantics
  arm64/mm/ptdump: Add address markers for BPF regions

Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
  arm64: Enable PCI write-combine resources under sysfs

Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
  perf: arm-cmn: Fix conversion specifiers for node type
  perf: arm-cmn: Fix unsigned comparison to less than zero
  arm_pmu: arm64: Use NMIs for PMU
  arm_pmu: Introduce pmu_irq_ops
  KVM: arm64: pmu: Make overflow handler NMI safe
  arm64: perf: Defer irq_work to IPI_IRQ_WORK
  arm64: perf: Remove PMU locking
  arm64: perf: Avoid PMXEV* indirection
  arm64: perf: Add missing ISB in armv8pmu_enable_counter()
  perf: Add Arm CMN-600 PMU driver
  perf: Add Arm CMN-600 DT binding
  arm64: perf: Add support caps under sysfs
  drivers/perf: thunderx2_pmu: Fix memory resource error handling
  drivers/perf: xgene_pmu: Fix uninitialized resource struct
  perf: arm_dsu: Support DSU ACPI devices
  arm64: perf: Remove unnecessary event_idx check
  drivers/perf: hisi: Add missing include of linux/module.h
  arm64: perf: Add general hardware LLC events for PMUv3

Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
  arm64: kprobe: clarify the comment of steppable hint instructions
  arm64: kprobe: disable probe of fault prone ptrauth instruction
  arm64: cpufeature: Modify address authentication cpufeature to exact
  arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
  arm64: traps: Allow force_signal_inject to pass esr error code
  arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions

Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
  firmware: arm_sdei: Remove _sdei_event_unregister()
  firmware: arm_sdei: Remove _sdei_event_register()
  firmware: arm_sdei: Introduce sdei_do_local_call()
  firmware: arm_sdei: Cleanup on cross call function
  firmware: arm_sdei: Remove while loop in sdei_event_unregister()
  firmware: arm_sdei: Remove while loop in sdei_event_register()
  firmware: arm_sdei: Remove redundant error message in sdei_probe()
  firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
  firmware: arm_sdei: Unregister driver on error in sdei_init()
  firmware: arm_sdei: Avoid nested statements in sdei_init()
  firmware: arm_sdei: Retrieve event number from event instance
  firmware: arm_sdei: Common block for failing path in sdei_event_create()
  firmware: arm_sdei: Remove sdei_is_err()

Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
  selftests: arm64: Add build and documentation for FP tests
  selftests: arm64: Add wrapper scripts for stress tests
  selftests: arm64: Add utility to set SVE vector lengths
  selftests: arm64: Add stress tests for FPSMID and SVE context switching
  selftests: arm64: Add test for the SVE ptrace interface
  selftests: arm64: Test case for enumeration of SVE vector lengths
  kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
  kselftests/arm64: add PAuth test for whether exec() changes keys
  kselftests/arm64: add nop checks for PAuth tests
  kselftests/arm64: add a basic Pointer Authentication test

Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
  arm64: Move console stack display code to stacktrace.c
  arm64: stacktrace: Convert to ARCH_STACKWALK
  arm64: stacktrace: Make stack walk callback consistent with generic code
  stacktrace: Remove reliable argument from arch_stack_walk() callback

Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
  arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
  arm64: mm: Pin down ASIDs for sharing mm with devices

Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
  arm64: topology: Stop using MPIDR for topology information

Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
  arm64/numa: Fix a typo in comment of arm64_numa_init
  arm64: fix some spelling mistakes in the comments by codespell

vDSO cleanups.
(Will Deacon)
* for-next/vdso:
  arm64: vdso: Fix unusual formatting in *setup_additional_pages()
  arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards

Documentation/admin-guide/perf/arm-cmn.rst

@@ -0,0 +1,65 @@
+=============================
+Arm Coherent Mesh Network PMU
+=============================
+
+CMN-600 is a configurable mesh interconnect consisting of a rectangular
+grid of crosspoints (XPs), with each crosspoint supporting up to two
+device ports to which various AMBA CHI agents are attached.
+
+CMN implements a distributed PMU design as part of its debug and trace
+functionality. This consists of a local monitor (DTM) at every XP, which
+counts up to 4 event signals from the connected device nodes and/or the
+XP itself. Overflow from these local counters is accumulated in up to 8
+global counters implemented by the main controller (DTC), which provides
+overall PMU control and interrupts for global counter overflow.
+
+PMU events
+----------
+
+The PMU driver registers a single PMU device for the whole interconnect,
+see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link
+more than one CMN together via external CCIX links - in this situation,
+each mesh counts its own events entirely independently, and additional
+PMU devices will be named arm_cmn_{1..n}.
+
+Most events are specified in a format based directly on the TRM
+definitions - "type" selects the respective node type, and "eventid" the
+event number. Some events require an additional occupancy ID, which is
+specified by "occupid".
+
+* Since RN-D nodes do not have any distinct events from RN-I nodes, they
+  are treated as the same type (0xa), and the common event templates are
+  named "rnid_*".
+
+* The cycle counter is treated as a synthetic event belonging to the DTC
+  node ("type" == 0x3, "eventid" is ignored).
+
+* XP events also encode the port and channel in the "eventid" field, to
+  match the underlying pmu_event0_id encoding for the pmu_event_sel
+  register. The event templates are named with prefixes to cover all
+  permutations.
+
+By default each event provides an aggregate count over all nodes of the
+given type. To target a specific node, "bynodeid" must be set to 1 and
+"nodeid" to the appropriate value derived from the CMN configuration
+(as defined in the "Node ID Mapping" section of the TRM).
+
+Watchpoints
+-----------
+
+The PMU can also count watchpoint events to monitor specific flit
+traffic. Watchpoints are treated as a synthetic event type, and like PMU
+events can be global or targeted with a particular XP's "nodeid" value.
+Since the watchpoint direction is otherwise implicit in the underlying
+register selection, separate events are provided for flit uploads and
+downloads.
+
+The flit match value and mask are passed in config1 and config2 ("val"
+and "mask" respectively). "wp_dev_sel", "wp_chn_sel", "wp_grp" and
+"wp_exclusive" are specified per the TRM definitions for dtm_wp_config0.
+Where a watchpoint needs to match fields from both match groups on the
+REQ or SNP channel, it can be specified as two events - one for each
+group - with the same nonzero "combine" value. The count for such a
+pair of combined events will be attributed to the primary match.
+Watchpoint events with a "combine" value of 0 are considered independent
+and will count individually.

Documentation/admin-guide/perf/index.rst

@@ -12,6 +12,7 @@ Performance monitor support
    qcom_l2_pmu
    qcom_l3_pmu
    arm-ccn
+   arm-cmn
    xgene-pmu
    arm_dsu_pmu
    thunderx2-pmu

Documentation/devicetree/bindings/perf/arm,cmn.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,cmn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CMN (Coherent Mesh Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    const: arm,cmn-600
+
+  reg:
+    items:
+      - description: Physical address of the base (PERIPHBASE) and
+          size (up to 64MB) of the configuration address space.
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    items:
+      - description: Overflow interrupt for DTC0
+      - description: Overflow interrupt for DTC1
+      - description: Overflow interrupt for DTC2
+      - description: Overflow interrupt for DTC3
+    description: One interrupt for each DTC domain implemented must
+      be specified, in order. DTC0 is always present.
+
+  arm,root-node:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset from PERIPHBASE of the configuration
+      discovery node (see TRM definition of ROOTNODEBASE).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - arm,root-node
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmu@50000000 {
+        compatible = "arm,cmn-600";
+        reg = <0x50000000 0x4000000>;
+        /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        arm,root-node = <0x104000>;
+    };
+...

Documentation/virt/kvm/arm/hyp-abi.rst

@@ -54,9 +54,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
     x3 = x1's value when entering the next payload (arm64)
     x4 = x2's value when entering the next payload (arm64)
 
-  Mask all exceptions, disable the MMU, move the arguments into place
-  (arm64 only), and jump to the restart address while at HYP/EL2. This
-  hypercall is not expected to return to its caller.
+  Mask all exceptions, disable the MMU, clear I+D bits, move the arguments
+  into place (arm64 only), and jump to the restart address while at HYP/EL2.
+  This hypercall is not expected to return to its caller.
 
 Any other value of r0/x0 triggers a hypervisor-specific handling,
 which is not documented here.