forked from Minki/linux
net: stmmac: Fix race between stmmac_drv_probe and stmmac_open
There is currently a small window during which the network device registered by
stmmac can be made visible, yet all resources, including and clock and MDIO bus
have not had a chance to be set up, this can lead to the following error to
occur:
[ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized):
stmmac_dvr_probe: warning: cannot get CSR clock
[ 473.919382] stmmaceth 0000:01:00.0: no reset control found
[ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42
[ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported
[ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported
[ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported
[ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized):
Enable RX Mitigation via HW Watchdog Timer
[ 473.921395] libphy: PHY stmmac-1:00 not found
[ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY
[ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to
PHY (error: -19)
[ 473.959710] libphy: stmmac: probed
[ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL
(stmmac-1:00) active
[ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL
(stmmac-1:01)
[ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL
(stmmac-1:02)
[ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL
(stmmac-1:03)
Fix this by making sure that register_netdev() is the last thing being done,
which guarantees that the clock and the MDIO bus are available.
Fixes: 4bfcbd7abc
("stmmac: Move the mdio_register/_unregister in probe/remove")
Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
8f18e4d03e
commit
5701659004
@ -3339,13 +3339,6 @@ int stmmac_dvr_probe(struct device *device,
|
||||
|
||||
spin_lock_init(&priv->lock);
|
||||
|
||||
ret = register_netdev(ndev);
|
||||
if (ret) {
|
||||
netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
|
||||
__func__, ret);
|
||||
goto error_netdev_register;
|
||||
}
|
||||
|
||||
/* If a specific clk_csr value is passed from the platform
|
||||
* this means that the CSR Clock Range selection cannot be
|
||||
* changed at run-time and it is fixed. Viceversa the driver'll try to
|
||||
@ -3372,11 +3365,14 @@ int stmmac_dvr_probe(struct device *device,
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
ret = register_netdev(ndev);
|
||||
if (ret)
|
||||
netdev_err(priv->dev, "%s: ERROR %i registering the device\n",
|
||||
__func__, ret);
|
||||
|
||||
return ret;
|
||||
|
||||
error_mdio_register:
|
||||
unregister_netdev(ndev);
|
||||
error_netdev_register:
|
||||
netif_napi_del(&priv->napi);
|
||||
error_hw_init:
|
||||
clk_disable_unprepare(priv->pclk);
|
||||
|
Loading…
Reference in New Issue
Block a user