leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

scsi: ufs: Fix a race condition between error handler and runtime PM ops

Browse Source 
The current IRQ handler blocks SCSI requests before scheduling eh_work,
when error handler calls pm_runtime_get_sync, if ufshcd_suspend/resume
sends a SCSI cmd, most likely the SSU cmd, since SCSI requests are blocked,
pm_runtime_get_sync() will never return because ufshcd_suspend/resume is
blocked by the SCSI cmd.

 - In queuecommand path, hba->ufshcd_state check and ufshcd_send_command
   should stay under the same spin lock. This is to make sure that no more
   commands leak into doorbell after hba->ufshcd_state is changed.

 - Don't block SCSI requests before error handler starts to run, let error
   handler block SCSI requests when it is ready to start error recovery.

 - Don't let SCSI layer keep requeuing the SCSI cmds sent from HBA runtime
   PM ops, let them pass or fail them. Let them pass if eh_work is
   scheduled due to non-fatal errors. Fail them if eh_work is scheduled due
   to fatal errors, otherwise the cmds may eventually time out since UFS is
   in bad state, which gets error handler blocked for too long. If we fail
   the SCSI cmds sent from HBA runtime PM ops, HBA runtime PM ops fails
   too, but it does not hurt since error handler can recover HBA runtime PM
   error.

Link: https://lore.kernel.org/r/1596975355-39813-9-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Can Guo 2020-08-09 05:15:54 -07:00 committed by Martin K. Petersen
parent c3be8d1ee1
commit 5586dd8ea2
1 changed files with 51 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
drivers/scsi/ufs/ufshcd.c
View File

@ -126,7 +126,8 @@ enum {
UFSHCD_STATE_RESET,
UFSHCD_STATE_ERROR,
UFSHCD_STATE_OPERATIONAL,
UFSHCD_STATE_EH_SCHEDULED,
UFSHCD_STATE_EH_SCHEDULED_FATAL,
UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
};
/* UFSHCD error handling flags */
@ -2515,34 +2516,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
if (!down_read_trylock(&hba->clk_scaling_lock))
return SCSI_MLQUEUE_HOST_BUSY;
spin_lock_irqsave(hba->host->host_lock, flags);
switch (hba->ufshcd_state) {
case UFSHCD_STATE_OPERATIONAL:
break;
case UFSHCD_STATE_EH_SCHEDULED:
case UFSHCD_STATE_RESET:
err = SCSI_MLQUEUE_HOST_BUSY;
goto out_unlock;
case UFSHCD_STATE_ERROR:
set_host_byte(cmd, DID_ERROR);
cmd->scsi_done(cmd);
goto out_unlock;
default:
dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n",
__func__, hba->ufshcd_state);
set_host_byte(cmd, DID_BAD_TARGET);
cmd->scsi_done(cmd);
goto out_unlock;
}
/* if error handling is in progress, don't issue commands */
if (ufshcd_eh_in_progress(hba)) {
set_host_byte(cmd, DID_ERROR);
cmd->scsi_done(cmd);
goto out_unlock;
}
spin_unlock_irqrestore(hba->host->host_lock, flags);
hba->req_abort_count = 0;
err = ufshcd_hold(hba, true);
@ -2578,11 +2551,51 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
/* Make sure descriptors are ready before ringing the doorbell */
wmb();
/* issue command to the controller */
spin_lock_irqsave(hba->host->host_lock, flags);
switch (hba->ufshcd_state) {
case UFSHCD_STATE_OPERATIONAL:
case UFSHCD_STATE_EH_SCHEDULED_NON_FATAL:
break;
case UFSHCD_STATE_EH_SCHEDULED_FATAL:
/*
* pm_runtime_get_sync() is used at error handling preparation
* stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's
* PM ops, it can never be finished if we let SCSI layer keep
* retrying it, which gets err handler stuck forever. Neither
* can we let the scsi cmd pass through, because UFS is in bad
* state, the scsi cmd may eventually time out, which will get
* err handler blocked for too long. So, just fail the scsi cmd
* sent from PM ops, err handler can recover PM error anyways.
*/
if (hba->pm_op_in_progress) {
hba->force_reset = true;
set_host_byte(cmd, DID_BAD_TARGET);
goto out_compl_cmd;
}
fallthrough;
case UFSHCD_STATE_RESET:
err = SCSI_MLQUEUE_HOST_BUSY;
goto out_compl_cmd;
case UFSHCD_STATE_ERROR:
set_host_byte(cmd, DID_ERROR);
goto out_compl_cmd;
default:
dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n",
__func__, hba->ufshcd_state);
set_host_byte(cmd, DID_BAD_TARGET);
goto out_compl_cmd;
}
ufshcd_send_command(hba, tag);
out_unlock:
spin_unlock_irqrestore(hba->host->host_lock, flags);
goto out;
out_compl_cmd:
scsi_dma_unmap(lrbp->cmd);
lrbp->cmd = NULL;
spin_unlock_irqrestore(hba->host->host_lock, flags);
ufshcd_release(hba);
if (!err)
cmd->scsi_done(cmd);
out:
up_read(&hba->clk_scaling_lock);
return err;
@ -5552,9 +5565,12 @@ static inline void ufshcd_schedule_eh_work(struct ufs_hba *hba)
{
/* handle fatal errors only when link is not in error state */
if (hba->ufshcd_state != UFSHCD_STATE_ERROR) {
hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED;
if (queue_work(hba->eh_wq, &hba->eh_work))
ufshcd_scsi_block_requests(hba);
if (hba->force_reset || ufshcd_is_link_broken(hba) ||
ufshcd_is_saved_err_fatal(hba))
hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL;
else
hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL;
queue_work(hba->eh_wq, &hba->eh_work);
}
}
@ -5664,6 +5680,7 @@ static void ufshcd_err_handler(struct work_struct *work)
spin_unlock_irqrestore(hba->host->host_lock, flags);
ufshcd_err_handling_prepare(hba);
spin_lock_irqsave(hba->host->host_lock, flags);
ufshcd_scsi_block_requests(hba);
/*
* A full reset and restore might have happened after preparation
* is finished, double check whether we should stop.