USB: ohci-nxp: Support for LPC32xx

This patch adds support for the LPC32xx to ohci-nxp

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Roland Stigge 2012-03-12 22:54:51 +01:00 committed by Greg Kroah-Hartman
parent 286431048b
commit 53dc25ada6
2 changed files with 104 additions and 30 deletions

View File

@ -1050,7 +1050,7 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_at91_driver
#endif
#ifdef CONFIG_ARCH_PNX4008
#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX)
#include "ohci-nxp.c"
#define PLATFORM_DRIVER usb_hcd_nxp_driver
#endif

View File

@ -3,6 +3,7 @@
*
* Currently supported OHCI host devices:
* - Philips PNX4008
* - NXP LPC32xx
*
* Authors: Dmitry Chigirev <source@mvista.com>
* Vitaly Wool <vitalywool@gmail.com>
@ -23,20 +24,24 @@
#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <mach/platform.h>
#include <mach/irqs.h>
#include <asm/gpio.h>
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
#define USB_CONFIG_BASE 0x31020000
#define PWRMAN_BASE 0x40004000
#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
#define USB_HOST_NEED_CLK_EN (1 << 21)
#define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4)
#define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8)
#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4)
#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8)
/* USB_OTG_CLK_CTRL bit defines */
#define AHB_M_CLOCK_ON (1 << 4)
@ -45,7 +50,7 @@
#define DEV_CLOCK_ON (1 << 1)
#define HOST_CLOCK_ON (1 << 0)
#define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110)
#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110)
/* USB_OTG_STAT_CONTROL bit defines */
#define TRANSPARENT_I2C_EN (1 << 7)
@ -99,6 +104,15 @@
#define ISP1301_I2C_INTERRUPT_RISING 0xE
#define ISP1301_I2C_REG_CLEAR_ADDR 1
/* On LPC32xx, those are undefined */
#ifndef start_int_set_falling_edge
#define start_int_set_falling_edge(irq)
#define start_int_set_rising_edge(irq)
#define start_int_ack(irq)
#define start_int_mask(irq)
#define start_int_umask(irq)
#endif
static struct i2c_driver isp1301_driver;
static struct i2c_client *isp1301_i2c_client;
@ -144,7 +158,7 @@ static void i2c_write(u8 buf, u8 subaddr)
i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2);
}
static void isp1301_configure(void)
static void isp1301_configure_pnx4008(void)
{
/* PNX4008 only supports DAT_SE0 USB mode */
/* PNX4008 R2A requires setting the MAX603 to output 3.6V */
@ -167,7 +181,63 @@ static void isp1301_configure(void)
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR);
i2c_write(0xFF,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR);
}
static void isp1301_configure_lpc32xx(void)
{
/* LPC32XX only supports DAT_SE0 USB mode */
/* This sequence is important */
/* Disable transparent UART mode first */
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
MC1_UART_EN);
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
~MC1_SPEED_REG);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_2,
(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_OTG_CONTROL_1,
(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
i2c_smbus_write_byte_data(isp1301_i2c_client,
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
(OTG1_DM_PULLUP | OTG1_DP_PULLUP));
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
~0);
i2c_smbus_write_byte_data(isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
/* Enable usb_need_clk clock after transceiver is initialized */
__raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL);
printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
}
static void isp1301_configure(void)
{
if (machine_is_pnx4008())
isp1301_configure_pnx4008();
else
isp1301_configure_lpc32xx();
}
static inline void isp1301_vbus_on(void)
@ -258,39 +328,43 @@ static const struct hc_driver ohci_nxp_hc_driver = {
static void nxp_set_usb_bits(void)
{
start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
start_int_ack(SE_USB_OTG_ATX_INT_N);
start_int_umask(SE_USB_OTG_ATX_INT_N);
if (machine_is_pnx4008()) {
start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
start_int_ack(SE_USB_OTG_ATX_INT_N);
start_int_umask(SE_USB_OTG_ATX_INT_N);
start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
start_int_ack(SE_USB_OTG_TIMER_INT);
start_int_umask(SE_USB_OTG_TIMER_INT);
start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
start_int_ack(SE_USB_OTG_TIMER_INT);
start_int_umask(SE_USB_OTG_TIMER_INT);
start_int_set_rising_edge(SE_USB_I2C_INT);
start_int_ack(SE_USB_I2C_INT);
start_int_umask(SE_USB_I2C_INT);
start_int_set_rising_edge(SE_USB_I2C_INT);
start_int_ack(SE_USB_I2C_INT);
start_int_umask(SE_USB_I2C_INT);
start_int_set_rising_edge(SE_USB_INT);
start_int_ack(SE_USB_INT);
start_int_umask(SE_USB_INT);
start_int_set_rising_edge(SE_USB_INT);
start_int_ack(SE_USB_INT);
start_int_umask(SE_USB_INT);
start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
start_int_ack(SE_USB_NEED_CLK_INT);
start_int_umask(SE_USB_NEED_CLK_INT);
start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
start_int_ack(SE_USB_NEED_CLK_INT);
start_int_umask(SE_USB_NEED_CLK_INT);
start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
start_int_ack(SE_USB_AHB_NEED_CLK_INT);
start_int_umask(SE_USB_AHB_NEED_CLK_INT);
start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
start_int_ack(SE_USB_AHB_NEED_CLK_INT);
start_int_umask(SE_USB_AHB_NEED_CLK_INT);
}
}
static void nxp_unset_usb_bits(void)
{
start_int_mask(SE_USB_OTG_ATX_INT_N);
start_int_mask(SE_USB_OTG_TIMER_INT);
start_int_mask(SE_USB_I2C_INT);
start_int_mask(SE_USB_INT);
start_int_mask(SE_USB_NEED_CLK_INT);
start_int_mask(SE_USB_AHB_NEED_CLK_INT);
if (machine_is_pnx4008()) {
start_int_mask(SE_USB_OTG_ATX_INT_N);
start_int_mask(SE_USB_OTG_TIMER_INT);
start_int_mask(SE_USB_I2C_INT);
start_int_mask(SE_USB_INT);
start_int_mask(SE_USB_NEED_CLK_INT);
start_int_mask(SE_USB_AHB_NEED_CLK_INT);
}
}
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)