From 32f47179833b63de72427131169809065db6745e Mon Sep 17 00:00:00 2001
From: Aditya Pakki <pakki001@umn.edu>
Date: Mon, 18 Mar 2019 18:50:56 -0500
Subject: [PATCH 01/13] serial: mvebu-uart: Fix to avoid a potential NULL
pointer dereference
of_match_device on failure to find a matching device can return a NULL
pointer. The patch checks for such a scenrio and passes the error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/mvebu-uart.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 231f751d1ef4..7e7b1559fa36 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -810,6 +810,9 @@ static int mvebu_uart_probe(struct platform_device *pdev)
return -EINVAL;
}
+ if (!match)
+ return -ENODEV;
+
/* Assume that all UART ports have a DT alias or none has */
id = of_alias_get_id(pdev->dev.of_node, "serial");
if (!pdev->dev.of_node || id < 0)
From 3a10e3dd52e80b9a97a3346020024d17b2c272d6 Mon Sep 17 00:00:00 2001
From: Aditya Pakki <pakki001@umn.edu>
Date: Mon, 18 Mar 2019 18:44:14 -0500
Subject: [PATCH 02/13] serial: max310x: Fix to avoid potential NULL pointer
dereference
of_match_device can return a NULL pointer when matching device is not
found. This patch avoids a scenario causing NULL pointer derefernce.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/max310x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index f5bdde405627..450ba6d7996c 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1415,6 +1415,8 @@ static int max310x_spi_probe(struct spi_device *spi)
if (spi->dev.of_node) {
const struct of_device_id *of_id =
of_match_device(max310x_dt_ids, &spi->dev);
+ if (!of_id)
+ return -ENODEV;
devtype = (struct max310x_devtype *)of_id->data;
} else {
From c85be041065c0be8bc48eda4c45e0319caf1d0e5 Mon Sep 17 00:00:00 2001
From: Kangjie Lu <kjlu@umn.edu>
Date: Fri, 15 Mar 2019 12:16:06 -0500
Subject: [PATCH 03/13] tty: atmel_serial: fix a potential NULL pointer
dereference
In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
error code to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 05147fe24343..41b728d223d1 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1288,6 +1288,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_dma_len(&atmel_port->sg_rx)/2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(port->dev, "Preparing DMA cyclic failed\n");
+ goto chan_err;
+ }
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
From 6734330654dac550f12e932996b868c6d0dcb421 Mon Sep 17 00:00:00 2001
From: Kangjie Lu <kjlu@umn.edu>
Date: Thu, 14 Mar 2019 02:21:51 -0500
Subject: [PATCH 04/13] tty: mxs-auart: fix a potential NULL pointer
dereference
In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereferences.
Multiple places use port.membase.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/mxs-auart.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 27235a526cce..4c188f4079b3 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1686,6 +1686,10 @@ static int mxs_auart_probe(struct platform_device *pdev)
s->port.mapbase = r->start;
s->port.membase = ioremap(r->start, resource_size(r));
+ if (!s->port.membase) {
+ ret = -ENOMEM;
+ goto out_disable_clks;
+ }
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
s->port.fifosize = MXS_AUART_FIFO_SIZE;
From ac0cdb3d990108df795b676cd0d0e65ac34b2273 Mon Sep 17 00:00:00 2001
From: Mao Wenan <maowenan@huawei.com>
Date: Fri, 8 Mar 2019 22:08:31 +0800
Subject: [PATCH 05/13] sc16is7xx: missing unregister/delete driver on error in
sc16is7xx_init()
Add the missing uart_unregister_driver() and i2c_del_driver() before return
from sc16is7xx_init() in the error handling case.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/sc16is7xx.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 635178cf3eed..09a183dfc526 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1507,7 +1507,7 @@ static int __init sc16is7xx_init(void)
ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
- return ret;
+ goto err_i2c;
}
#endif
@@ -1515,10 +1515,18 @@ static int __init sc16is7xx_init(void)
ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
if (ret < 0) {
pr_err("failed to init sc16is7xx spi --> %d\n", ret);
- return ret;
+ goto err_spi;
}
#endif
return ret;
+
+err_spi:
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+ i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+#endif
+err_i2c:
+ uart_unregister_driver(&sc16is7xx_uart);
+ return ret;
}
module_init(sc16is7xx_init);
From c5cbc78acf693f5605d4a85b1327fa7933daf092 Mon Sep 17 00:00:00 2001
From: Nathan Chancellor <natechancellor@gmail.com>
Date: Fri, 8 Mar 2019 11:37:44 -0700
Subject: [PATCH 06/13] tty: serial: qcom_geni_serial: Initialize baud in
qcom_geni_console_setup
When building with -Wsometimes-uninitialized, Clang warns:
drivers/tty/serial/qcom_geni_serial.c:1079:6: warning: variable 'baud'
is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
It's not wrong; when options is NULL, baud has no default value. Use
9600 as that is a sane default.
Link: https://github.com/ClangBuiltLinux/linux/issues/395
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/qcom_geni_serial.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 3bcec1c20219..35e5f9c5d5be 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1050,7 +1050,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
{
struct uart_port *uport;
struct qcom_geni_serial_port *port;
- int baud;
+ int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
From 72ff51d8dd262d1fef25baedc2ac35116435be47 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
Date: Wed, 6 Mar 2019 17:54:03 +0100
Subject: [PATCH 07/13] serial: ar933x_uart: Fix build failure with disabled
console
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Andrey has reported on OpenWrt's bug tracking system[1], that he
currently can't use ar93xx_uart as pure serial UART without console
(CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined),
because compilation ends with following error:
ar933x_uart.c: In function 'ar933x_uart_console_write':
ar933x_uart.c:550:14: error: 'struct uart_port' has no
member named 'sysrq'
So this patch moves all the code related to console handling behind
series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2152
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Andrey Batyiev <batyiev@gmail.com>
Reported-by: Andrey Batyiev <batyiev@gmail.com>
Tested-by: Andrey Batyiev <batyiev@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/ar933x_uart.c | 24 ++++++++----------------
1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index db5df3d54818..3bdd56a1021b 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -49,11 +49,6 @@ struct ar933x_uart_port {
struct clk *clk;
};
-static inline bool ar933x_uart_console_enabled(void)
-{
- return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE);
-}
-
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
int offset)
{
@@ -508,6 +503,7 @@ static const struct uart_ops ar933x_uart_ops = {
.verify_port = ar933x_uart_verify_port,
};
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
static struct ar933x_uart_port *
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
@@ -604,14 +600,7 @@ static struct console ar933x_uart_console = {
.index = -1,
.data = &ar933x_uart_driver,
};
-
-static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
-{
- if (!ar933x_uart_console_enabled())
- return;
-
- ar933x_console_ports[up->port.line] = up;
-}
+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
static struct uart_driver ar933x_uart_driver = {
.owner = THIS_MODULE,
@@ -700,7 +689,9 @@ static int ar933x_uart_probe(struct platform_device *pdev)
baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
- ar933x_uart_add_console_port(up);
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+ ar933x_console_ports[up->port.line] = up;
+#endif
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
if (ret)
@@ -749,8 +740,9 @@ static int __init ar933x_uart_init(void)
{
int ret;
- if (ar933x_uart_console_enabled())
- ar933x_uart_driver.cons = &ar933x_uart_console;
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+ ar933x_uart_driver.cons = &ar933x_uart_console;
+#endif
ret = uart_register_driver(&ar933x_uart_driver);
if (ret)
From 93bcefd4c6bad4c69dbc4edcd3fbf774b24d930d Mon Sep 17 00:00:00 2001
From: Hoan Nguyen An <na-hoan@jinso.co.jp>
Date: Mon, 18 Mar 2019 18:26:32 +0900
Subject: [PATCH 08/13] serial: sh-sci: Fix setting SCSCR_TIE while
transferring data
We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted
(if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer,
re-enable the SCSCR_TIE bit, which was done at sci_start_tx().
This is unnecessary processing, wasting CPU operation if the data transmission length is large.
And further, transmit end, FIFO empty bits disabling have also been performed in the step above.
Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/sh-sci.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 060fcd42b6d5..2d1c626312cd 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -838,19 +838,9 @@ static void sci_transmit_chars(struct uart_port *port)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
+ if (uart_circ_empty(xmit))
sci_stop_tx(port);
- } else {
- ctrl = serial_port_in(port, SCSCR);
- if (port->type != PORT_SCI) {
- serial_port_in(port, SCxSR); /* Dummy read */
- sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
- }
-
- ctrl |= SCSCR_TIE;
- serial_port_out(port, SCSCR, ctrl);
- }
}
/* On SH3, SCIF may read end-of-break as a space->mark char */
From f3040983132bf3477acd45d2452a906e67c2fec9 Mon Sep 17 00:00:00 2001
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Date: Tue, 19 Mar 2019 15:20:34 +0200
Subject: [PATCH 09/13] tty/serial: atmel: Add is_half_duplex helper
Use a helper function to check that a port needs to use half duplex
communication, replacing several occurrences of multi-line bit checking.
Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 41b728d223d1..55ca3416113f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -231,6 +231,13 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
__raw_writeb(value, port->membase + ATMEL_US_THR);
}
+static inline int atmel_uart_is_half_duplex(struct uart_port *port)
+{
+ return ((port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
+ (port->iso7816.flags & SER_ISO7816_ENABLED);
+}
+
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
@@ -608,10 +615,9 @@ static void atmel_stop_tx(struct uart_port *port)
/* Disable interrupts */
atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
- if (((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
- port->iso7816.flags & SER_ISO7816_ENABLED)
+ if (atmel_uart_is_half_duplex(port))
atmel_start_rx(port);
+
}
/*
@@ -628,9 +634,7 @@ static void atmel_start_tx(struct uart_port *port)
return;
if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
- if (((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
- port->iso7816.flags & SER_ISO7816_ENABLED)
+ if (atmel_uart_is_half_duplex(port))
atmel_stop_rx(port);
if (atmel_use_pdc_tx(port))
@@ -928,9 +932,7 @@ static void atmel_complete_tx_dma(void *arg)
*/
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
- else if (((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
- port->iso7816.flags & SER_ISO7816_ENABLED) {
+ else if (atmel_uart_is_half_duplex(port)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
@@ -1512,9 +1514,7 @@ static void atmel_tx_pdc(struct uart_port *port)
atmel_uart_writel(port, ATMEL_US_IER,
atmel_port->tx_done_mask);
} else {
- if (((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
- port->iso7816.flags & SER_ISO7816_ENABLED) {
+ if (atmel_uart_is_half_duplex(port)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
From 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f Mon Sep 17 00:00:00 2001
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Date: Tue, 19 Mar 2019 15:20:35 +0200
Subject: [PATCH 10/13] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX
is stopped
In half-duplex operation, RX should be started after TX completes.
If DMA is used, there is a case when the DMA transfer completes but the
TX FIFO is not emptied, so the RX cannot be restarted just yet.
Use a boolean variable to store this state and rearm TX interrupt mask
to be signaled again that the transfer finished. In interrupt transmit
handler this variable is used to start RX. A warning message is generated
if RX is activated before TX fifo is cleared.
Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable
RX after TX is done")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 55ca3416113f..0b4f36905321 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -166,6 +166,8 @@ struct atmel_uart_port {
unsigned int pending_status;
spinlock_t lock_suspended;
+ bool hd_start_rx; /* can start RX during half-duplex operation */
+
/* ISO7816 */
unsigned int fidi_min;
unsigned int fidi_max;
@@ -933,8 +935,13 @@ static void atmel_complete_tx_dma(void *arg)
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
else if (atmel_uart_is_half_duplex(port)) {
- /* DMA done, stop TX, start RX for RS485 */
- atmel_start_rx(port);
+ /*
+ * DMA done, re-enable TXEMPTY and signal that we can stop
+ * TX and start RX for RS485
+ */
+ atmel_port->hd_start_rx = true;
+ atmel_uart_writel(port, ATMEL_US_IER,
+ atmel_port->tx_done_mask);
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -1382,9 +1389,20 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (pending & atmel_port->tx_done_mask) {
- /* Either PDC or interrupt transmission */
atmel_uart_writel(port, ATMEL_US_IDR,
atmel_port->tx_done_mask);
+
+ /* Start RX if flag was set and FIFO is empty */
+ if (atmel_port->hd_start_rx) {
+ if (!(atmel_uart_readl(port, ATMEL_US_CSR)
+ & ATMEL_US_TXEMPTY))
+ dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n");
+
+ atmel_port->hd_start_rx = false;
+ atmel_start_rx(port);
+ return;
+ }
+
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
}
}
From 898a737c8a436b2fcd6dcb0b57775ada2f846a26 Mon Sep 17 00:00:00 2001
From: Erin Lo <erin.lo@mediatek.com>
Date: Mon, 11 Mar 2019 16:54:31 +0800
Subject: [PATCH 11/13] dt-bindings: serial: Add compatible for Mediatek MT8183
This adds dt-binding documentation of uart for Mediatek MT8183 SoC
Platform.
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/serial/mtk-uart.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 742cb470595b..bcfb13194f16 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -16,6 +16,7 @@ Required properties:
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
* "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
From 3ec8002951ea173e24b466df1ea98c56b7920e63 Mon Sep 17 00:00:00 2001
From: Wentao Wang <witallwang@gmail.com>
Date: Wed, 20 Mar 2019 15:30:39 +0000
Subject: [PATCH 12/13] Disable kgdboc failed by echo space to
/sys/module/kgdboc/parameters/kgdboc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such
device” error.
This is caused by function "configure_kgdboc" who init err to ENODEV
when the config is empty (legal input) the code go out with ENODEV
returned.
Fixes: 2dd453168643 ("kgdboc: Fix restrict error")
Signed-off-by: Wentao Wang <witallwang@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/kgdboc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 6fb312e7af71..bfe5e9e034ec 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -148,8 +148,10 @@ static int configure_kgdboc(void)
char *cptr = config;
struct console *cons;
- if (!strlen(config) || isspace(config[0]))
+ if (!strlen(config) || isspace(config[0])) {
+ err = 0;
goto noconfig;
+ }
kgdboc_io_ops.is_console = 0;
kgdb_tty_driver = NULL;
From f4e68d58cf2b20a581759bbc7228052534652673 Mon Sep 17 00:00:00 2001
From: Fabien Dessenne <fabien.dessenne@st.com>
Date: Thu, 21 Mar 2019 16:43:26 +0100
Subject: [PATCH 13/13] tty: fix NULL pointer issue when tty_port ops is not
set
Unlike 'client_ops' which is initialized to 'default_client_ops', the
port operations 'ops' may be left to NULL.
Check the 'ops' value before checking the 'ops->x' value.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/tty_port.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 044c3cbdcfa4..a9e12b3bc31d 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -325,7 +325,7 @@ static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty)
if (tty && C_HUPCL(tty))
tty_port_lower_dtr_rts(port);
- if (port->ops->shutdown)
+ if (port->ops && port->ops->shutdown)
port->ops->shutdown(port);
}
out:
@@ -398,7 +398,7 @@ EXPORT_SYMBOL_GPL(tty_port_tty_wakeup);
*/
int tty_port_carrier_raised(struct tty_port *port)
{
- if (port->ops->carrier_raised == NULL)
+ if (!port->ops || !port->ops->carrier_raised)
return 1;
return port->ops->carrier_raised(port);
}
@@ -414,7 +414,7 @@ EXPORT_SYMBOL(tty_port_carrier_raised);
*/
void tty_port_raise_dtr_rts(struct tty_port *port)
{
- if (port->ops->dtr_rts)
+ if (port->ops && port->ops->dtr_rts)
port->ops->dtr_rts(port, 1);
}
EXPORT_SYMBOL(tty_port_raise_dtr_rts);
@@ -429,7 +429,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts);
*/
void tty_port_lower_dtr_rts(struct tty_port *port)
{
- if (port->ops->dtr_rts)
+ if (port->ops && port->ops->dtr_rts)
port->ops->dtr_rts(port, 0);
}
EXPORT_SYMBOL(tty_port_lower_dtr_rts);
@@ -684,7 +684,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty,
if (!tty_port_initialized(port)) {
clear_bit(TTY_IO_ERROR, &tty->flags);
- if (port->ops->activate) {
+ if (port->ops && port->ops->activate) {
int retval = port->ops->activate(port, tty);
if (retval) {
mutex_unlock(&port->mutex);