Char/Misc driver fixes for 4.20-rc4

Here are some small char/misc driver fixes for issues that have been
 reported.
 
 Nothing major, highlights include:
 	- gnss sync write fixes
 	- uio oops fix
 	- nvmem fixes
 	- other minor fixes and some documentation/maintainers updates
 
 Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW/ZqSw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yks8gCgm0Amv9/GLpE7qZqe/Az2S7t7pm4An2NHYfS1
 /vrBi80OCiSLGakl/zs2
 =MYVD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for issues that have been
  reported.

  Nothing major, highlights include:

   - gnss sync write fixes

   - uio oops fix

   - nvmem fixes

   - other minor fixes and some documentation/maintainers updates

  Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/security-bugs: Postpone fix publication in exceptional cases
  MAINTAINERS: Add Sasha as a stable branch maintainer
  gnss: sirf: fix synchronous write timeout
  gnss: serial: fix synchronous write timeout
  uio: Fix an Oops on load
  test_firmware: fix error return getting clobbered
  nvmem: core: fix regression in of_nvmem_cell_get()
  misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data
  drivers/misc/sgi-gru: fix Spectre v1 vulnerability
  Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up
  slimbus: ngd: remove unnecessary check

Documentation/admin-guide/security-bugs.rst

@@ -32,16 +32,17 @@ Disclosure and embargoed information
 The security list is not a disclosure channel.  For that, see Coordination
 below.
 
-Once a robust fix has been developed, our preference is to release the
-fix in a timely fashion, treating it no differently than any of the other
-thousands of changes and fixes the Linux kernel project releases every
-month.
+Once a robust fix has been developed, the release process starts.  Fixes
+for publicly known bugs are released immediately.
 
-However, at the request of the reporter, we will postpone releasing the
-fix for up to 5 business days after the date of the report or after the
-embargo has lifted; whichever comes first.  The only exception to that
-rule is if the bug is publicly known, in which case the preference is to
-release the fix as soon as it's available.
+Although our preference is to release fixes for publicly undisclosed bugs
+as soon as they become available, this may be postponed at the request of
+the reporter or an affected party for up to 7 calendar days from the start
+of the release process, with an exceptional extension to 14 calendar days
+if it is agreed that the criticality of the bug requires more time.  The
+only valid reason for deferring the publication of a fix is to accommodate
+the logistics of QA and large scale rollouts which require release
+coordination.
 
 Whilst embargoed information may be shared with trusted individuals in
 order to develop a fix, such information will not be published alongside

MAINTAINERS

@@ -14085,6 +14085,7 @@ F:	Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Sasha Levin <sashal@kernel.org>
 L:	stable@vger.kernel.org
 S:	Supported
 F:	Documentation/process/stable-kernel-rules.rst

drivers/gnss/serial.c

@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/sched.h>
 #include <linux/serdev.h>
 #include <linux/slab.h>
 
@@ -63,7 +64,7 @@ static int gnss_serial_write_raw(struct gnss_device *gdev,
 	int ret;
 
 	/* write is only buffered synchronously */
-	ret = serdev_device_write(serdev, buf, count, 0);
+	ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT);
 	if (ret < 0)
 		return ret;
 

drivers/gnss/sirf.c

@@ -16,6 +16,7 @@
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/sched.h>
 #include <linux/serdev.h>
 #include <linux/slab.h>
 #include <linux/wait.h>
@@ -83,7 +84,7 @@ static int sirf_write_raw(struct gnss_device *gdev, const unsigned char *buf,
 	int ret;
 
 	/* write is only buffered synchronously */
-	ret = serdev_device_write(serdev, buf, count, 0);
+	ret = serdev_device_write(serdev, buf, count, MAX_SCHEDULE_TIMEOUT);
 	if (ret < 0)
 		return ret;
 

drivers/hv/hv_kvp.c

@@ -353,6 +353,9 @@ static void process_ib_ipinfo(void *in_msg, void *out_msg, int op)
 
 		out->body.kvp_ip_val.dhcp_enabled = in->kvp_ip_val.dhcp_enabled;
 
+		/* fallthrough */
+
+	case KVP_OP_GET_IP_INFO:
 		utf16s_to_utf8s((wchar_t *)in->kvp_ip_val.adapter_id,
 				MAX_ADAPTER_ID_SIZE,
 				UTF16_LITTLE_ENDIAN,
@@ -405,7 +408,11 @@ kvp_send_key(struct work_struct *dummy)
 		process_ib_ipinfo(in_msg, message, KVP_OP_SET_IP_INFO);
 		break;
 	case KVP_OP_GET_IP_INFO:
-		/* We only need to pass on message->kvp_hdr.operation.  */
+		/*
+		 * We only need to pass on the info of operation, adapter_id
+		 * and addr_family to the userland kvp daemon.
+		 */
+		process_ib_ipinfo(in_msg, message, KVP_OP_GET_IP_INFO);
 		break;
 	case KVP_OP_SET:
 		switch (in_msg->body.kvp_set.data.value_type) {
@@ -446,9 +453,9 @@ kvp_send_key(struct work_struct *dummy)
 
 		}
 
-		break;
-
-	case KVP_OP_GET:
+		/*
+		 * The key is always a string - utf16 encoding.
+		 */
 		message->body.kvp_set.data.key_size =
 			utf16s_to_utf8s(
 			(wchar_t *)in_msg->body.kvp_set.data.key,
@@ -456,6 +463,17 @@ kvp_send_key(struct work_struct *dummy)
 			UTF16_LITTLE_ENDIAN,
 			message->body.kvp_set.data.key,
 			HV_KVP_EXCHANGE_MAX_KEY_SIZE - 1) + 1;
+
+		break;
+
+	case KVP_OP_GET:
+		message->body.kvp_get.data.key_size =
+			utf16s_to_utf8s(
+			(wchar_t *)in_msg->body.kvp_get.data.key,
+			in_msg->body.kvp_get.data.key_size,
+			UTF16_LITTLE_ENDIAN,
+			message->body.kvp_get.data.key,
+			HV_KVP_EXCHANGE_MAX_KEY_SIZE - 1) + 1;
 		break;
 
 	case KVP_OP_DELETE:

drivers/misc/atmel-ssc.c

@@ -132,7 +132,7 @@ static const struct of_device_id atmel_ssc_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, atmel_ssc_dt_ids);
 #endif
 
-static inline const struct atmel_ssc_platform_data * __init
+static inline const struct atmel_ssc_platform_data *
 	atmel_ssc_get_driver_data(struct platform_device *pdev)
 {
 	if (pdev->dev.of_node) {

drivers/misc/sgi-gru/grukdump.c

@@ -27,6 +27,9 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <asm/uv/uv_hub.h>
+
+#include <linux/nospec.h>
+
 #include "gru.h"
 #include "grutables.h"
 #include "gruhandles.h"
@@ -196,6 +199,7 @@ int gru_dump_chiplet_request(unsigned long arg)
 	/* Currently, only dump by gid is implemented */
 	if (req.gid >= gru_max_gids)
 		return -EINVAL;
+	req.gid = array_index_nospec(req.gid, gru_max_gids);
 
 	gru = GID_TO_GRU(req.gid);
 	ubuf = req.buf;

drivers/nvmem/core.c

@@ -44,6 +44,7 @@ struct nvmem_cell {
 	int			bytes;
 	int			bit_offset;
 	int			nbits;
+	struct device_node	*np;
 	struct nvmem_device	*nvmem;
 	struct list_head	node;
 };
@@ -298,6 +299,7 @@ static void nvmem_cell_drop(struct nvmem_cell *cell)
 	mutex_lock(&nvmem_mutex);
 	list_del(&cell->node);
 	mutex_unlock(&nvmem_mutex);
+	of_node_put(cell->np);
 	kfree(cell->name);
 	kfree(cell);
 }
@@ -530,6 +532,7 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
 			return -ENOMEM;
 
 		cell->nvmem = nvmem;
+		cell->np = of_node_get(child);
 		cell->offset = be32_to_cpup(addr++);
 		cell->bytes = be32_to_cpup(addr);
 		cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
@@ -960,14 +963,13 @@ out:
 
 #if IS_ENABLED(CONFIG_OF)
 static struct nvmem_cell *
-nvmem_find_cell_by_index(struct nvmem_device *nvmem, int index)
+nvmem_find_cell_by_node(struct nvmem_device *nvmem, struct device_node *np)
 {
 	struct nvmem_cell *cell = NULL;
-	int i = 0;
 
 	mutex_lock(&nvmem_mutex);
 	list_for_each_entry(cell, &nvmem->cells, node) {
-		if (index == i++)
+		if (np == cell->np)
 			break;
 	}
 	mutex_unlock(&nvmem_mutex);
@@ -1011,7 +1013,7 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id)
 	if (IS_ERR(nvmem))
 		return ERR_CAST(nvmem);
 
-	cell = nvmem_find_cell_by_index(nvmem, index);
+	cell = nvmem_find_cell_by_node(nvmem, cell_np);
 	if (!cell) {
 		__nvmem_device_put(nvmem);
 		return ERR_PTR(-ENOENT);

drivers/slimbus/qcom-ngd-ctrl.c

@@ -777,9 +777,6 @@ static int qcom_slim_ngd_xfer_msg(struct slim_controller *sctrl,
 	u8 la = txn->la;
 	bool usr_msg = false;
 
-	if (txn->mc & SLIM_MSG_CLK_PAUSE_SEQ_FLG)
-		return -EPROTONOSUPPORT;
-
 	if (txn->mt == SLIM_MSG_MT_CORE &&
 		(txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION &&
 		 txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW))

drivers/slimbus/slimbus.h

@@ -61,12 +61,6 @@
 #define SLIM_MSG_MC_NEXT_REMOVE_CHANNEL          0x58
 #define SLIM_MSG_MC_RECONFIGURE_NOW              0x5F
 
-/*
- * Clock pause flag to indicate that the reconfig message
- * corresponds to clock pause sequence
- */
-#define SLIM_MSG_CLK_PAUSE_SEQ_FLG		(1U << 8)
-
 /* Clock pause values per SLIMbus spec */
 #define SLIM_CLK_FAST				0
 #define SLIM_CLK_CONST_PHASE			1

drivers/uio/uio.c

@@ -961,6 +961,8 @@ int __uio_register_device(struct module *owner,
 	if (ret)
 		goto err_uio_dev_add_attributes;
 
+	info->uio_dev = idev;
+
 	if (info->irq && (info->irq != UIO_IRQ_CUSTOM)) {
 		/*
 		 * Note that we deliberately don't use devm_request_irq
@@ -972,11 +974,12 @@ int __uio_register_device(struct module *owner,
 		 */
 		ret = request_irq(info->irq, uio_interrupt,
 				  info->irq_flags, info->name, idev);
-		if (ret)
+		if (ret) {
+			info->uio_dev = NULL;
 			goto err_request_irq;
+		}
 	}
 
-	info->uio_dev = idev;
 	return 0;
 
 err_request_irq:

lib/test_firmware.c

@@ -837,6 +837,7 @@ static ssize_t read_firmware_show(struct device *dev,
 	if (req->fw->size > PAGE_SIZE) {
 		pr_err("Testing interface must use PAGE_SIZE firmware for now\n");
 		rc = -EINVAL;
+		goto out;
 	}
 	memcpy(buf, req->fw->data, req->fw->size);