diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index 30408015d231..c034820615bb 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -53,12 +53,6 @@ config I2C_ALGO8XX tristate "MPC8xx CPM I2C interface" depends on 8xx && I2C -config I2C_ALGO_SIBYTE - tristate "SiByte SMBus interface" - depends on SIBYTE_SB1xxx_SOC && I2C - help - Supports the SiByte SOC on-chip I2C interfaces (2 channels). - config I2C_ALGO_SGI tristate "I2C SGI interfaces" depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS) diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile index 867fe1f67401..208be04a3dbd 100644 --- a/drivers/i2c/algos/Makefile +++ b/drivers/i2c/algos/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o -obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o ifeq ($(CONFIG_I2C_DEBUG_ALGO),y) diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c deleted file mode 100644 index 16d666fa16f3..000000000000 --- a/drivers/i2c/algos/i2c-algo-sibyte.c +++ /dev/null @@ -1,186 +0,0 @@ -/* ------------------------------------------------------------------------- */ -/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 2001,2002,2003 Broadcom Corporation - Copyright (C) 1995-2000 Simon G. Vogl - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki and even - Frodo Looijaard . */ - -/* Ported for SiByte SOCs by Broadcom Corporation. */ - -#include -#include -#include - -#include -#include -#include - -#include -#include - -/* ----- global defines ----------------------------------------------- */ -#define SMB_CSR(a,r) ((long)(a->reg_base + r)) - -/* ----- global variables --------------------------------------------- */ - -/* module parameters: - */ -static int bit_scan; /* have a look at what's hanging 'round */ - - -static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data * data) -{ - struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data; - int data_bytes = 0; - int error; - - while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY) - ; - - switch (size) { - case I2C_SMBUS_QUICK: - csr_out32((V_SMB_ADDR(addr) | (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) | - V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START)); - break; - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_READ) { - csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE), - SMB_CSR(adap, R_SMB_START)); - data_bytes = 1; - } else { - csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD)); - csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE), - SMB_CSR(adap, R_SMB_START)); - } - break; - case I2C_SMBUS_BYTE_DATA: - csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD)); - if (read_write == I2C_SMBUS_READ) { - csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE), - SMB_CSR(adap, R_SMB_START)); - data_bytes = 1; - } else { - csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA)); - csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE), - SMB_CSR(adap, R_SMB_START)); - } - break; - case I2C_SMBUS_WORD_DATA: - csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD)); - if (read_write == I2C_SMBUS_READ) { - csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE), - SMB_CSR(adap, R_SMB_START)); - data_bytes = 2; - } else { - csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA)); - csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA)); - csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE), - SMB_CSR(adap, R_SMB_START)); - } - break; - default: - return -1; /* XXXKW better error code? */ - } - - while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY) - ; - - error = csr_in32(SMB_CSR(adap, R_SMB_STATUS)); - if (error & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS)); - return -1; /* XXXKW better error code? */ - } - - if (data_bytes == 1) - data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff; - if (data_bytes == 2) - data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff; - - return 0; -} - -static u32 bit_func(struct i2c_adapter *adap) -{ - return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA); -} - - -/* -----exported algorithm data: ------------------------------------- */ - -static struct i2c_algorithm i2c_sibyte_algo = { - .smbus_xfer = smbus_xfer, - .functionality = bit_func, -}; - -/* - * registering functions to load algorithms at runtime - */ -int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) -{ - int i; - struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data; - - /* register new adapter to i2c module... */ - i2c_adap->algo = &i2c_sibyte_algo; - - /* Set the frequency to 100 kHz */ - csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ)); - csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL)); - - /* scan bus */ - if (bit_scan) { - union i2c_smbus_data data; - int rc; - printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n", - i2c_adap->name); - for (i = 0x00; i < 0x7f; i++) { - /* XXXKW is this a realistic probe? */ - rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0, - I2C_SMBUS_BYTE_DATA, &data); - if (!rc) { - printk("(%02x)",i); - } else - printk("."); - } - printk("\n"); - } - - return i2c_add_adapter(i2c_adap); -} - - -int i2c_sibyte_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - - -EXPORT_SYMBOL(i2c_sibyte_add_bus); -EXPORT_SYMBOL(i2c_sibyte_del_bus); - -MODULE_AUTHOR("Kip Walker, Broadcom Corp."); -MODULE_DESCRIPTION("SiByte I2C-Bus algorithm"); -module_param(bit_scan, int, 0); -MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus"); -MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index fa503ed9f86d..f516eb7a23f7 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -1,6 +1,7 @@ /* * Copyright (C) 2004 Steven J. Hill * Copyright (C) 2001,2002,2003 Broadcom Corporation + * Copyright (C) 1995-2000 Simon G. Vogl * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -17,11 +18,162 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include #include -#include +#include +#include +#include #include #include + +struct i2c_algo_sibyte_data { + void *data; /* private data */ + int bus; /* which bus */ + void *reg_base; /* CSR base */ +}; + +/* ----- global defines ----------------------------------------------- */ +#define SMB_CSR(a,r) ((long)(a->reg_base + r)) + +/* ----- global variables --------------------------------------------- */ + +/* module parameters: + */ +static int bit_scan; /* have a look at what's hanging 'round */ +module_param(bit_scan, int, 0); +MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus"); + + +static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data; + int data_bytes = 0; + int error; + + while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY) + ; + + switch (size) { + case I2C_SMBUS_QUICK: + csr_out32((V_SMB_ADDR(addr) | + (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) | + V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START)); + break; + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_READ) { + csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE), + SMB_CSR(adap, R_SMB_START)); + data_bytes = 1; + } else { + csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD)); + csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE), + SMB_CSR(adap, R_SMB_START)); + } + break; + case I2C_SMBUS_BYTE_DATA: + csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD)); + if (read_write == I2C_SMBUS_READ) { + csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE), + SMB_CSR(adap, R_SMB_START)); + data_bytes = 1; + } else { + csr_out32(V_SMB_LB(data->byte), + SMB_CSR(adap, R_SMB_DATA)); + csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE), + SMB_CSR(adap, R_SMB_START)); + } + break; + case I2C_SMBUS_WORD_DATA: + csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD)); + if (read_write == I2C_SMBUS_READ) { + csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE), + SMB_CSR(adap, R_SMB_START)); + data_bytes = 2; + } else { + csr_out32(V_SMB_LB(data->word & 0xff), + SMB_CSR(adap, R_SMB_DATA)); + csr_out32(V_SMB_MB(data->word >> 8), + SMB_CSR(adap, R_SMB_DATA)); + csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE), + SMB_CSR(adap, R_SMB_START)); + } + break; + default: + return -1; /* XXXKW better error code? */ + } + + while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY) + ; + + error = csr_in32(SMB_CSR(adap, R_SMB_STATUS)); + if (error & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS)); + return -1; /* XXXKW better error code? */ + } + + if (data_bytes == 1) + data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff; + if (data_bytes == 2) + data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff; + + return 0; +} + +static u32 bit_func(struct i2c_adapter *adap) +{ + return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA); +} + + +/* -----exported algorithm data: ------------------------------------- */ + +static struct i2c_algorithm i2c_sibyte_algo = { + .smbus_xfer = smbus_xfer, + .functionality = bit_func, +}; + +/* + * registering functions to load algorithms at runtime + */ +int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) +{ + int i; + struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data; + + /* register new adapter to i2c module... */ + i2c_adap->algo = &i2c_sibyte_algo; + + /* Set the frequency to 100 kHz */ + csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ)); + csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL)); + + /* scan bus */ + if (bit_scan) { + union i2c_smbus_data data; + int rc; + printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n", + i2c_adap->name); + for (i = 0x00; i < 0x7f; i++) { + /* XXXKW is this a realistic probe? */ + rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE_DATA, &data); + if (!rc) { + printk("(%02x)",i); + } else + printk("."); + } + printk("\n"); + } + + return i2c_add_adapter(i2c_adap); +} + + static struct i2c_algo_sibyte_data sibyte_board_data[2] = { { NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) }, { NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) } @@ -58,8 +210,8 @@ static int __init i2c_sibyte_init(void) static void __exit i2c_sibyte_exit(void) { - i2c_sibyte_del_bus(&sibyte_board_adapter[0]); - i2c_sibyte_del_bus(&sibyte_board_adapter[1]); + i2c_del_bus(&sibyte_board_adapter[0]); + i2c_del_bus(&sibyte_board_adapter[1]); } module_init(i2c_sibyte_init); diff --git a/include/linux/i2c-algo-sibyte.h b/include/linux/i2c-algo-sibyte.h deleted file mode 100644 index 03914ded8614..000000000000 --- a/include/linux/i2c-algo-sibyte.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2001,2002,2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef I2C_ALGO_SIBYTE_H -#define I2C_ALGO_SIBYTE_H 1 - -#include - -struct i2c_algo_sibyte_data { - void *data; /* private data */ - int bus; /* which bus */ - void *reg_base; /* CSR base */ -}; - -int i2c_sibyte_add_bus(struct i2c_adapter *, int speed); -int i2c_sibyte_del_bus(struct i2c_adapter *); - -#endif /* I2C_ALGO_SIBYTE_H */