From cc9a3e99949af4bcaf9027fc57f824b595a5fcac Mon Sep 17 00:00:00 2001
From: Jiada Wang <jiada_wang@mentor.com>
Date: Mon, 20 May 2013 21:51:51 +0900
Subject: [PATCH 01/13] ARM i.MX6q: fix for ldb_di_sels
As pll5_video_div has been introduced to represent the clock
generated from post-divider for video.
Instead of pll5_video, pll5_video_div should be proper root clock
for ldb_di_sel.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index dda9a2bd3acb..ba2de54a39db 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -188,7 +188,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m"
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
+static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
From 37523dc5ec2fead0eb5235fd9334f0419013a1f2 Mon Sep 17 00:00:00 2001
From: Jonas Andersson <jonas@microbit.se>
Date: Thu, 23 May 2013 13:38:05 +0200
Subject: [PATCH 02/13] ARM: dts: imx: fix clocks for cspi
The CSPI controller has only one clock, but the driver spi-imx.c needs
clock "per" to calculate bitrate divisor.
Signed-off-by: Jonas Andersson <jonas@microbit.se>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/imx25.dtsi | 12 ++++++------
arch/arm/boot/dts/imx27.dtsi | 6 +++---
arch/arm/boot/dts/imx51.dtsi | 2 +-
arch/arm/boot/dts/imx53.dtsi | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index d2550e0bca24..701153992c69 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -141,8 +141,8 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x43fa4000 0x4000>;
- clocks = <&clks 62>;
- clock-names = "ipg";
+ clocks = <&clks 62>, <&clks 62>;
+ clock-names = "ipg", "per";
interrupts = <14>;
status = "disabled";
};
@@ -182,8 +182,8 @@
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50004000 0x4000>;
interrupts = <0>;
- clocks = <&clks 80>;
- clock-names = "ipg";
+ clocks = <&clks 80>, <&clks 80>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -210,8 +210,8 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50010000 0x4000>;
- clocks = <&clks 79>;
- clock-names = "ipg";
+ clocks = <&clks 79>, <&clks 79>;
+ clock-names = "ipg", "per";
interrupts = <13>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index ff4bd4873edf..75bd11386516 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -131,7 +131,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
- clocks = <&clks 53>, <&clks 0>;
+ clocks = <&clks 53>, <&clks 53>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -142,7 +142,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
- clocks = <&clks 52>, <&clks 0>;
+ clocks = <&clks 52>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -223,7 +223,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
- clocks = <&clks 51>, <&clks 0>;
+ clocks = <&clks 51>, <&clks 51>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 21bb786c5b31..53fdde69bbf4 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -631,7 +631,7 @@
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 0>;
+ clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 845982eaac22..eb83aa039b8b 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -714,7 +714,7 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 0>;
+ clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
From 2c06897e4597b1cd68ef29e4145917a751c2b4cd Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Thu, 16 May 2013 12:15:35 +0100
Subject: [PATCH 03/13] ARM: ux500: Only configure wake-up reasons on ux500
based platforms
Multiplatform calls all enabled platforms' initcalls. In the
ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn
executes some ux500 specific register reads/writes. When running on
some !ux500 platforms this ends up causing a kernel Oops. This patch
ensures the PRCMU call is only invoked when running on ux500 based
platforms.
Reported-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/cpuidle.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c
index 317a2be129fb..a45dd09daed9 100644
--- a/arch/arm/mach-ux500/cpuidle.c
+++ b/arch/arm/mach-ux500/cpuidle.c
@@ -21,6 +21,7 @@
#include <asm/proc-fns.h>
#include "db8500-regs.h"
+#include "id.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
@@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = {
int __init ux500_idle_init(void)
{
+ if (!(cpu_is_u8500_family() || cpu_is_ux540_family()))
+ return -ENODEV;
+
/* Configure wake up reasons */
prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
PRCMU_WAKEUP(ABB));
From 67b7c75e1a42f8288450203cd80a26b11dab8582 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Fri, 24 May 2013 12:22:19 +0100
Subject: [PATCH 04/13] ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3
This patch fixes a bug introduced in the v3.10 merge window.
The AB8500 External Regulator driver has recently landed upstream,
which registers each of the 3 external regulators located on the
AB8500. If these regulators are marked as 'always on', there is a
potential for power-loss. If they're not and are seemingly unused
the Regulator subsystem will attempt to disable them to save power.
This causes an issue for AUX1, AUX2 and AUX3 as they obtain their
power from EXT3. So we're specifying that here to prevent EXT3 from
being powered down.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/board-mop500-regulators.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 33c353bc1c4a..d6b7c8556fa1 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
/* supplies to the display/camera */
[AB8500_LDO_AUX1] = {
+ .supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-DISPLAY",
.min_uV = 2800000,
@@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
},
/* supplies to the on-board eMMC */
[AB8500_LDO_AUX2] = {
+ .supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-eMMC1",
.min_uV = 1100000,
@@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
},
/* supply for VAUX3, supplies to SDcard slots */
[AB8500_LDO_AUX3] = {
+ .supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-MMC-SD",
.min_uV = 1100000,
From e89b4058096569c999fa599370162022a5a2b3d2 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Tue, 21 May 2013 19:41:48 +0200
Subject: [PATCH 05/13] ARM: Kirkwood: TS219: Fix crash by double PCIe
instantiation
When creating the DT based boards-ts219.c the none DT ts219-setup.c
was used as a template. This includes a lateinit() call to initialize
the PCIe bus. The code makes use of machine_is_ts219() which is never
true on DT, so a FIXME was added and the code left as is. This was
unproblematic until b73690c8f8b5d: "ARM: Kirkwood: Support basic
hotplug for PCI-E" which changes the way the PCIe bus is
initialized. The non-DT ts219-setup.c now crashes during boot. The
lateinit() call in the DT boards-ts219.c is being called,
machine_is_ts219() is true and so the PCIe is initialized a second
time.
This patch removes the useless, and now clearly dangerous, code from
boards-ts219.c, making ts219-setup.c work again.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.9.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-kirkwood/board-ts219.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187c7ee1..4695d5f35fc9 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void)
pm_power_off = qnap_tsx1x_power_off;
}
-
-/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
From b60b61d41220c8d34e2c62a748bc78bc5d40585e Mon Sep 17 00:00:00 2001
From: Nadav Haklai <nadavh@marvell.com>
Date: Thu, 23 May 2013 10:54:02 +0200
Subject: [PATCH 06/13] ARM: mvebu: Fix bug in coherency fabric low level init
function
When adding CPU to the SMP group and enabling the coherency on this
CPU we must protect the register access.
The previous implementation claims to be atomic but doesn't provide
any protection against parallel access to the coherency fabric control
and configuration registers.
This patch fixes this by using the ldrex and strex mechanism.
This method should be used in all accesses to those registers.
[gregory.clement@free-electrons.com: fixed the commit's topic]
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-mvebu/coherency_ll.S | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 53e8391192cd..5476669ba905 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -32,15 +32,21 @@ ENTRY(ll_set_cpu_coherent)
/* Add CPU to SMP group - Atomic */
add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
- ldr r2, [r3]
+1:
+ ldrex r2, [r3]
orr r2, r2, r1
- str r2, [r3]
+ strex r0, r2, [r3]
+ cmp r0, #0
+ bne 1b
/* Enable coherency on CPU - Atomic */
- add r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET
- ldr r2, [r3]
+ add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET
+1:
+ ldrex r2, [r3]
orr r2, r2, r1
- str r2, [r3]
+ strex r0, r2, [r3]
+ cmp r0, #0
+ bne 1b
dsb
From 13731d862cf5219216533a3b0de052cee4cc5038 Mon Sep 17 00:00:00 2001
From: Jongsung Kim <neidhard.kim@lge.com>
Date: Wed, 29 May 2013 22:07:39 -0600
Subject: [PATCH 07/13] ARM: bcm2835: override the HW UART periphid
Stephen Warren reported the recent commit 78506f2 (add support for
extended FIFO-size of PL011-r1p5) breaks the serial port on the
BCM2835 ARM SoC.
A UART compatible with the ARM PL011-r1p5 should have 32-deep FIFOs.
The BCM2835 UART just looks like an ARM PL011-r1p5, but has 16-deep
FIFOs just like PL011-r1p4 or earlier revisions. As a workaround for
this compatibility issue, this patch overrides the HW UART periphid
register values with the actually compatible UART periphid 0x00241011
(r1p3 or r1p4).
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/boot/dts/bcm2835.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index f0052dccf9a8..1e12aeff403b 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -44,6 +44,7 @@
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
clock-frequency = <3000000>;
+ arm,primecell-periphid = <0x00241011>;
};
gpio: gpio {
From a08b9bc586a7810cdebbc316d5cbaed56a2a04a9 Mon Sep 17 00:00:00 2001
From: Anson Huang <b20788@freescale.com>
Date: Fri, 31 May 2013 17:01:54 -0400
Subject: [PATCH 08/13] ARM: imx: clk-imx6q: AXI clock select index is
incorrect
The AXI clock mux should be as below:
00: periph;
01: pll2_pfd2_396m;
10: periph;
11: pll3_pfd1_540m;
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ba2de54a39db..4e3148ce852d 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -181,7 +181,7 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy",
static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
-static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
From b5f83e9b069f4bf19214ca6130947806a2b853fa Mon Sep 17 00:00:00 2001
From: Markus Pargmann <mpa@pengutronix.de>
Date: Tue, 28 May 2013 17:00:57 +0200
Subject: [PATCH 09/13] ARM: mxs: icoll: Fix interrupts gpio bank 0
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The mxs interrupt controller does not support polling for interrupts,
but the driver still does it, which is a relict from
pre-MULTI_IRQ_HANDLER times.
The existing code assumes that 0x7f means no interrupt, but this value
is an actually valid irq number, namely gpio bank 0's irq. This results
in the driver not detecting when irq 0x7f is active which makes the
machine effectively dead lock.
This patch removes the interrupt poll loop and allows usage of gpio0
interrupt without an infinite loop.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
drivers/irqchip/irq-mxs.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 29889bbdcc6d..63b3d4eb0ef7 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -76,16 +76,10 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
{
u32 irqnr;
- do {
- irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
- if (irqnr != 0x7f) {
- __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
- irqnr = irq_find_mapping(icoll_domain, irqnr);
- handle_IRQ(irqnr, regs);
- continue;
- }
- break;
- } while (1);
+ irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
+ __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+ irqnr = irq_find_mapping(icoll_domain, irqnr);
+ handle_IRQ(irqnr, regs);
}
static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
From 350753bf2bd1267f471e89829d68c35b9abf4930 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 21 May 2013 12:39:31 +0200
Subject: [PATCH 10/13] sh-pfc: r8a7779: Don't group USB OVC and PENC pins
The USB_OVCn pins are alternate options for USB over-current detection
when using a 3.3V USB interface. As they're not mandatory they can be
used independently of the USB PENC pins. Don't group the USB_OVCn and
PENC pins to avoid conflicts when the USB_OVCn pins are used by another
function.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 45 ++++++++++++++++++++++------
1 file changed, 36 insertions(+), 9 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
index 791a6719d8a9..8cd90e7e945a 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c
@@ -2357,27 +2357,48 @@ static const unsigned int sdhi3_wp_mux[] = {
};
/* - USB0 ------------------------------------------------------------------- */
static const unsigned int usb0_pins[] = {
- /* OVC */
- 150, 154,
+ /* PENC */
+ 154,
};
static const unsigned int usb0_mux[] = {
- USB_OVC0_MARK, USB_PENC0_MARK,
+ USB_PENC0_MARK,
+};
+static const unsigned int usb0_ovc_pins[] = {
+ /* USB_OVC */
+ 150
+};
+static const unsigned int usb0_ovc_mux[] = {
+ USB_OVC0_MARK,
};
/* - USB1 ------------------------------------------------------------------- */
static const unsigned int usb1_pins[] = {
- /* OVC */
- 152, 155,
+ /* PENC */
+ 155,
};
static const unsigned int usb1_mux[] = {
- USB_OVC1_MARK, USB_PENC1_MARK,
+ USB_PENC1_MARK,
+};
+static const unsigned int usb1_ovc_pins[] = {
+ /* USB_OVC */
+ 152,
+};
+static const unsigned int usb1_ovc_mux[] = {
+ USB_OVC1_MARK,
};
/* - USB2 ------------------------------------------------------------------- */
static const unsigned int usb2_pins[] = {
- /* OVC, PENC */
- 125, 156,
+ /* PENC */
+ 156,
};
static const unsigned int usb2_mux[] = {
- USB_OVC2_MARK, USB_PENC2_MARK,
+ USB_PENC2_MARK,
+};
+static const unsigned int usb2_ovc_pins[] = {
+ /* USB_OVC */
+ 125,
+};
+static const unsigned int usb2_ovc_mux[] = {
+ USB_OVC2_MARK,
};
static const struct sh_pfc_pin_group pinmux_groups[] = {
@@ -2501,8 +2522,11 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(sdhi3_cd),
SH_PFC_PIN_GROUP(sdhi3_wp),
SH_PFC_PIN_GROUP(usb0),
+ SH_PFC_PIN_GROUP(usb0_ovc),
SH_PFC_PIN_GROUP(usb1),
+ SH_PFC_PIN_GROUP(usb1_ovc),
SH_PFC_PIN_GROUP(usb2),
+ SH_PFC_PIN_GROUP(usb2_ovc),
};
static const char * const du0_groups[] = {
@@ -2683,14 +2707,17 @@ static const char * const sdhi3_groups[] = {
static const char * const usb0_groups[] = {
"usb0",
+ "usb0_ovc",
};
static const char * const usb1_groups[] = {
"usb1",
+ "usb1_ovc",
};
static const char * const usb2_groups[] = {
"usb2",
+ "usb2_ovc",
};
static const struct sh_pfc_function pinmux_functions[] = {
From 5600a8485603b240790005b9b58de4c4f6ada69d Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Wed, 22 May 2013 19:47:05 +0900
Subject: [PATCH 11/13] ARM: shmobile: sh73a0: Update CMT clockevent rating to
80
Update the CMT clockevent rating from 125 to 80.
This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1
introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp:
Avoid dummy clockevent being preferred over real").
The patch noted above reduces the rating of dummy clockevent from 400 to 100.
This patch reduces the rating of CMT so that it is once again less than that
of the dummy clockevent.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/setup-sh73a0.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index fdf3894b1cc3..9696f3646864 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clockevent_rating = 125,
+ .clockevent_rating = 80,
.clocksource_rating = 125,
};
From 437d8ac510b90610da814ae25a7b79aaf3b4910f Mon Sep 17 00:00:00 2001
From: Tushar Behera <tushar.behera@linaro.org>
Date: Tue, 4 Jun 2013 09:49:10 +0530
Subject: [PATCH 12/13] ARM: EXYNOS: uncompress - print debug messages if
DEBUG_LL is defined
Printing low-level debug messages make an assumption that the specified
UART port has been preconfigured by the bootloader. Incorrectly
specified UART port results in system getting stalled while printing the
message "Uncompressing Linux... done, booting the kernel"
This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since
the UART port might different for different board, it is not possible to
specify it correctly for every board that use a common defconfig file.
Calling this print subroutine only when DEBUG_LL fixes the problem. By
disabling DEBUG_LL in default config file, we would be able to boot
multiple boards with different default UART ports.
With this current approach, we miss the print "Uncompressing Linux...
done, booting the kernel." when DEBUG_LL is not defined.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/plat-samsung/include/plat/uncompress.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 438b24846e7f..02b66d723d1a 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -66,6 +66,9 @@ uart_rd(unsigned int reg)
static void putc(int ch)
{
+ if (!config_enabled(CONFIG_DEBUG_LL))
+ return;
+
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
int level;
@@ -118,7 +121,12 @@ static void arch_decomp_error(const char *x)
#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
static inline void arch_enable_uart_fifo(void)
{
- u32 fifocon = uart_rd(S3C2410_UFCON);
+ u32 fifocon;
+
+ if (!config_enabled(CONFIG_DEBUG_LL))
+ return;
+
+ fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
fifocon |= S3C2410_UFCON_RESETBOTH;
From 9c1fcdccc7ce5611ec1edf45dbbe51b10e333bd3 Mon Sep 17 00:00:00 2001
From: Doug Anderson <dianders@chromium.org>
Date: Wed, 5 Jun 2013 13:56:33 -0700
Subject: [PATCH 13/13] ARM: exynos: add debug_ll_io_init() call in
exynos_init_io()
If the early MMU mapping of the UART happens to get booted out of the
TLB between the start of paging_init() and when we finally re-add the
UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
we've got early_printk enabled. Avoid this hang by calling
debug_ll_io_init() early.
Without this patch, you can reliably reproduce a hang when early
printk is enabled by adding flush_tlb_all() at the start of
exynos_init_io(). After this patch the hang goes away.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/mach-exynos/common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 027c9e7f0d13..f7e504b7874d 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -386,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
void __init exynos_init_io(struct map_desc *mach_desc, int size)
{
+ debug_ll_io_init();
+
#ifdef CONFIG_OF
if (initial_boot_params)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);