forked from Minki/linux
ixp4xx: base support for Arcom Vulcan
This patch adds some basic support for the Arcom Vulcan (ixp425 based). Supported devices include: - XR16L551 serial ports - External watchdog - Flash - SRAM - 1-wire id Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
This commit is contained in:
Marc Zyngier
Krzysztof Hałasa
parent
e40152ee1e
commit
4d9be47f3d
@ -140,6 +140,14 @@ config MACH_FSG
|
||||
FSG-3 device. For more information on this platform,
|
||||
see http://www.nslu2-linux.org/wiki/FSG3/HomePage
|
||||
|
||||
config MACH_ARCOM_VULCAN
|
||||
bool
|
||||
prompt "Arcom/Eurotech Vulcan"
|
||||
select PCI
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support Arcom's
|
||||
Vulcan board.
|
||||
|
||||
#
|
||||
# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
|
||||
#
|
||||
|
||||
@ -31,6 +31,7 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
||||
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
|
||||
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
|
||||
obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
|
||||
obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
|
||||
|
||||
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
||||
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
|
||||
|
||||
246
arch/arm/mach-ixp4xx/vulcan-setup.c
Normal file
246
arch/arm/mach-ixp4xx/vulcan-setup.c
Normal file
@ -0,0 +1,246 @@
|
||||
/*
|
||||
* arch/arm/mach-ixp4xx/vulcan-setup.c
|
||||
*
|
||||
* Arcom/Eurotech Vulcan board-setup
|
||||
*
|
||||
* Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
|
||||
*
|
||||
* based on fsg-setup.c:
|
||||
* Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
|
||||
*/
|
||||
|
||||
#include <linux/if_ether.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/w1-gpio.h>
|
||||
#include <linux/mtd/plat-ram.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/flash.h>
|
||||
|
||||
static struct flash_platform_data vulcan_flash_data = {
|
||||
.map_name = "cfi_probe",
|
||||
.width = 2,
|
||||
};
|
||||
|
||||
static struct resource vulcan_flash_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device vulcan_flash = {
|
||||
.name = "IXP4XX-Flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &vulcan_flash_data,
|
||||
},
|
||||
.resource = &vulcan_flash_resource,
|
||||
.num_resources = 1,
|
||||
};
|
||||
|
||||
static struct platdata_mtd_ram vulcan_sram_data = {
|
||||
.mapname = "Vulcan SRAM",
|
||||
.bankwidth = 1,
|
||||
};
|
||||
|
||||
static struct resource vulcan_sram_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device vulcan_sram = {
|
||||
.name = "mtd-ram",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &vulcan_sram_data,
|
||||
},
|
||||
.resource = &vulcan_sram_resource,
|
||||
.num_resources = 1,
|
||||
};
|
||||
|
||||
static struct resource vulcan_uart_resources[] = {
|
||||
[0] = {
|
||||
.start = IXP4XX_UART1_BASE_PHYS,
|
||||
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = IXP4XX_UART2_BASE_PHYS,
|
||||
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[2] = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct plat_serial8250_port vulcan_uart_data[] = {
|
||||
[0] = {
|
||||
.mapbase = IXP4XX_UART1_BASE_PHYS,
|
||||
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
|
||||
.irq = IRQ_IXP4XX_UART1,
|
||||
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = IXP4XX_UART_XTAL,
|
||||
},
|
||||
[1] = {
|
||||
.mapbase = IXP4XX_UART2_BASE_PHYS,
|
||||
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
||||
.irq = IRQ_IXP4XX_UART2,
|
||||
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = IXP4XX_UART_XTAL,
|
||||
},
|
||||
[2] = {
|
||||
.irq = IXP4XX_GPIO_IRQ(4),
|
||||
.irqflags = IRQF_TRIGGER_LOW,
|
||||
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.uartclk = 1843200,
|
||||
},
|
||||
[3] = {
|
||||
.irq = IXP4XX_GPIO_IRQ(4),
|
||||
.irqflags = IRQF_TRIGGER_LOW,
|
||||
.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.uartclk = 1843200,
|
||||
},
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct platform_device vulcan_uart = {
|
||||
.name = "serial8250",
|
||||
.id = PLAT8250_DEV_PLATFORM,
|
||||
.dev = {
|
||||
.platform_data = vulcan_uart_data,
|
||||
},
|
||||
.resource = vulcan_uart_resources,
|
||||
.num_resources = ARRAY_SIZE(vulcan_uart_resources),
|
||||
};
|
||||
|
||||
static struct eth_plat_info vulcan_plat_eth[] = {
|
||||
[0] = {
|
||||
.phy = 0,
|
||||
.rxq = 3,
|
||||
.txreadyq = 20,
|
||||
},
|
||||
[1] = {
|
||||
.phy = 1,
|
||||
.rxq = 4,
|
||||
.txreadyq = 21,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device vulcan_eth[] = {
|
||||
[0] = {
|
||||
.name = "ixp4xx_eth",
|
||||
.id = IXP4XX_ETH_NPEB,
|
||||
.dev = {
|
||||
.platform_data = &vulcan_plat_eth[0],
|
||||
},
|
||||
},
|
||||
[1] = {
|
||||
.name = "ixp4xx_eth",
|
||||
.id = IXP4XX_ETH_NPEC,
|
||||
.dev = {
|
||||
.platform_data = &vulcan_plat_eth[1],
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
static struct resource vulcan_max6369_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device vulcan_max6369 = {
|
||||
.name = "max6369_wdt",
|
||||
.id = -1,
|
||||
.resource = &vulcan_max6369_resource,
|
||||
.num_resources = 1,
|
||||
};
|
||||
|
||||
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
|
||||
.pin = 14,
|
||||
};
|
||||
|
||||
static struct platform_device vulcan_w1_gpio = {
|
||||
.name = "w1-gpio",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &vulcan_w1_gpio_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device *vulcan_devices[] __initdata = {
|
||||
&vulcan_uart,
|
||||
&vulcan_flash,
|
||||
&vulcan_sram,
|
||||
&vulcan_max6369,
|
||||
&vulcan_eth[0],
|
||||
&vulcan_eth[1],
|
||||
&vulcan_w1_gpio,
|
||||
};
|
||||
|
||||
static void __init vulcan_init(void)
|
||||
{
|
||||
ixp4xx_sys_init();
|
||||
|
||||
/* Flash is spread over both CS0 and CS1 */
|
||||
vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
||||
vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
||||
*IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN |
|
||||
IXP4XX_EXP_BUS_STROBE_T(3) |
|
||||
IXP4XX_EXP_BUS_SIZE(0xF) |
|
||||
IXP4XX_EXP_BUS_BYTE_RD16 |
|
||||
IXP4XX_EXP_BUS_WR_EN;
|
||||
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
||||
|
||||
/* SRAM on CS2, (256kB, 8bit, writable) */
|
||||
vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2);
|
||||
vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1;
|
||||
*IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN |
|
||||
IXP4XX_EXP_BUS_STROBE_T(1) |
|
||||
IXP4XX_EXP_BUS_HOLD_T(2) |
|
||||
IXP4XX_EXP_BUS_SIZE(9) |
|
||||
IXP4XX_EXP_BUS_SPLT_EN |
|
||||
IXP4XX_EXP_BUS_WR_EN |
|
||||
IXP4XX_EXP_BUS_BYTE_EN;
|
||||
|
||||
/* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */
|
||||
vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3);
|
||||
vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1;
|
||||
vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start;
|
||||
vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8;
|
||||
*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
|
||||
IXP4XX_EXP_BUS_STROBE_T(3) |
|
||||
IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)|
|
||||
IXP4XX_EXP_BUS_WR_EN |
|
||||
IXP4XX_EXP_BUS_BYTE_EN;
|
||||
|
||||
/* GPIOS on CS4 (512 bytes, 8bits, writable) */
|
||||
*IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN |
|
||||
IXP4XX_EXP_BUS_WR_EN |
|
||||
IXP4XX_EXP_BUS_BYTE_EN;
|
||||
|
||||
/* max6369 on CS5 (512 bytes, 8bits, writable) */
|
||||
vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5);
|
||||
vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5);
|
||||
*IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN |
|
||||
IXP4XX_EXP_BUS_WR_EN |
|
||||
IXP4XX_EXP_BUS_BYTE_EN;
|
||||
|
||||
platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices));
|
||||
}
|
||||
|
||||
MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
|
||||
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
|
||||
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
||||
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
||||
.map_io = ixp4xx_map_io,
|
||||
.init_irq = ixp4xx_init_irq,
|
||||
.timer = &ixp4xx_timer,
|
||||
.boot_params = 0x0100,
|
||||
.init_machine = vulcan_init,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue
Block a user