diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt
index 07a250498fbb..f569db58f64a 100644
--- a/Documentation/devicetree/bindings/hwmon/jc42.txt
+++ b/Documentation/devicetree/bindings/hwmon/jc42.txt
@@ -34,6 +34,10 @@ Required properties:
 
 - reg: I2C address
 
+Optional properties:
+- smbus-timeout-disable: When set, the smbus timeout function will be disabled.
+			 This is not supported on all chips.
+
 Example:
 
 temp-sensor@1a {
diff --git a/MAINTAINERS b/MAINTAINERS
index 77d819b458a9..d4fdcb12616c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6174,7 +6174,6 @@ M:	Jean Delvare <jdelvare@suse.com>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
 W:	http://hwmon.wiki.kernel.org/
-T:	quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 5f11dc014ed6..e5234f953a6d 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -22,6 +22,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -45,6 +46,7 @@ static const unsigned short normal_i2c[] = {
 #define JC42_REG_TEMP		0x05
 #define JC42_REG_MANID		0x06
 #define JC42_REG_DEVICEID	0x07
+#define JC42_REG_SMBUS		0x22 /* NXP and Atmel, possibly others? */
 
 /* Status bits in temperature register */
 #define JC42_ALARM_CRIT_BIT	15
@@ -75,6 +77,9 @@ static const unsigned short normal_i2c[] = {
 #define GT_MANID		0x1c68	/* Giantec */
 #define GT_MANID2		0x132d	/* Giantec, 2nd mfg ID */
 
+/* SMBUS register */
+#define SMBUS_STMOUT		BIT(7)  /* SMBus time-out, active low */
+
 /* Supported chips */
 
 /* Analog Devices */
@@ -495,6 +500,22 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	data->extended = !!(cap & JC42_CAP_RANGE);
 
+	if (device_property_read_bool(dev, "smbus-timeout-disable")) {
+		int smbus;
+
+		/*
+		 * Not all chips support this register, but from a
+		 * quick read of various datasheets no chip appears
+		 * incompatible with the below attempt to disable
+		 * the timeout. And the whole thing is opt-in...
+		 */
+		smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
+		if (smbus < 0)
+			return smbus;
+		i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
+					     smbus | SMBUS_STMOUT);
+	}
+
 	config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
 	if (config < 0)
 		return config;
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 52a58b8b6e1b..a139940cd991 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -21,6 +21,7 @@
 
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -499,8 +500,8 @@ static long pmbus_reg2data_linear(struct pmbus_data *data,
 static long pmbus_reg2data_direct(struct pmbus_data *data,
 				  struct pmbus_sensor *sensor)
 {
-	long val = (s16) sensor->data;
-	long m, b, R;
+	s64 b, val = (s16)sensor->data;
+	s32 m, R;
 
 	m = data->info->m[sensor->class];
 	b = data->info->b[sensor->class];
@@ -528,11 +529,12 @@ static long pmbus_reg2data_direct(struct pmbus_data *data,
 		R--;
 	}
 	while (R < 0) {
-		val = DIV_ROUND_CLOSEST(val, 10);
+		val = div_s64(val + 5LL, 10L);  /* round closest */
 		R++;
 	}
 
-	return (val - b) / m;
+	val = div_s64(val - b, m);
+	return clamp_val(val, LONG_MIN, LONG_MAX);
 }
 
 /*
@@ -656,7 +658,8 @@ static u16 pmbus_data2reg_linear(struct pmbus_data *data,
 static u16 pmbus_data2reg_direct(struct pmbus_data *data,
 				 struct pmbus_sensor *sensor, long val)
 {
-	long m, b, R;
+	s64 b, val64 = val;
+	s32 m, R;
 
 	m = data->info->m[sensor->class];
 	b = data->info->b[sensor->class];
@@ -673,18 +676,18 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data,
 		R -= 3;		/* Adjust R and b for data in milli-units */
 		b *= 1000;
 	}
-	val = val * m + b;
+	val64 = val64 * m + b;
 
 	while (R > 0) {
-		val *= 10;
+		val64 *= 10;
 		R--;
 	}
 	while (R < 0) {
-		val = DIV_ROUND_CLOSEST(val, 10);
+		val64 = div_s64(val64 + 5LL, 10L);  /* round closest */
 		R++;
 	}
 
-	return val;
+	return (u16)clamp_val(val64, S16_MIN, S16_MAX);
 }
 
 static u16 pmbus_data2reg_vid(struct pmbus_data *data,