forked from Minki/linux
tty-usb-safe-serial: Coding style
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Alan Cox
Linus Torvalds
parent
a30fa793f3
commit
43c8f435b2
@ -13,24 +13,25 @@
|
||||
* Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
|
||||
*/
|
||||
|
||||
/*
|
||||
* The encapsultaion is designed to overcome difficulties with some USB hardware.
|
||||
/*
|
||||
* The encapsultaion is designed to overcome difficulties with some USB
|
||||
* hardware.
|
||||
*
|
||||
* While the USB protocol has a CRC over the data while in transit, i.e. while
|
||||
* being carried over the bus, there is no end to end protection. If the hardware
|
||||
* has any problems getting the data into or out of the USB transmit and receive
|
||||
* FIFO's then data can be lost.
|
||||
* being carried over the bus, there is no end to end protection. If the
|
||||
* hardware has any problems getting the data into or out of the USB transmit
|
||||
* and receive FIFO's then data can be lost.
|
||||
*
|
||||
* This protocol adds a two byte trailer to each USB packet to specify the number
|
||||
* of bytes of valid data and a 10 bit CRC that will allow the receiver to verify
|
||||
* that the entire USB packet was received without error.
|
||||
* This protocol adds a two byte trailer to each USB packet to specify the
|
||||
* number of bytes of valid data and a 10 bit CRC that will allow the receiver
|
||||
* to verify that the entire USB packet was received without error.
|
||||
*
|
||||
* Because in this case the sender and receiver are the class and function drivers
|
||||
* there is now end to end protection.
|
||||
* Because in this case the sender and receiver are the class and function
|
||||
* drivers there is now end to end protection.
|
||||
*
|
||||
* There is an additional option that can be used to force all transmitted packets
|
||||
* to be padded to the maximum packet size. This provides a work around for some
|
||||
* devices which have problems with small USB packets.
|
||||
* There is an additional option that can be used to force all transmitted
|
||||
* packets to be padded to the maximum packet size. This provides a work
|
||||
* around for some devices which have problems with small USB packets.
|
||||
*
|
||||
* Assuming a packetsize of N:
|
||||
*
|
||||
@ -44,11 +45,12 @@
|
||||
* | Data Length | 10 bit CRC |
|
||||
* + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 +
|
||||
*
|
||||
* The 10 bit CRC is computed across the sent data, followed by the trailer with
|
||||
* the length set and the CRC set to zero. The CRC is then OR'd into the trailer.
|
||||
* The 10 bit CRC is computed across the sent data, followed by the trailer
|
||||
* with the length set and the CRC set to zero. The CRC is then OR'd into
|
||||
* the trailer.
|
||||
*
|
||||
* When received a 10 bit CRC is computed over the entire frame including the trailer
|
||||
* and should be equal to zero.
|
||||
* When received a 10 bit CRC is computed over the entire frame including
|
||||
* the trailer and should be equal to zero.
|
||||
*
|
||||
* Two module parameters are used to control the encapsulation, if both are
|
||||
* turned of the module works as a simple serial device with NO
|
||||
@ -69,7 +71,7 @@
|
||||
#include <linux/tty_flip.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <asm/uaccess.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/usb/serial.h>
|
||||
|
||||
@ -86,12 +88,12 @@ static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
|
||||
#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
|
||||
#define DRIVER_DESC "USB Safe Encapsulated Serial"
|
||||
|
||||
MODULE_AUTHOR (DRIVER_AUTHOR);
|
||||
MODULE_DESCRIPTION (DRIVER_DESC);
|
||||
MODULE_AUTHOR(DRIVER_AUTHOR);
|
||||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
static __u16 vendor; // no default
|
||||
static __u16 product; // no default
|
||||
static __u16 vendor; /* no default */
|
||||
static __u16 product; /* no default */
|
||||
module_param(vendor, ushort, 0);
|
||||
MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
|
||||
module_param(product, ushort, 0);
|
||||
@ -122,30 +124,31 @@ MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off");
|
||||
#define LINEO_SAFESERIAL_CRC_PADDED 0x02
|
||||
|
||||
|
||||
#define MY_USB_DEVICE(vend,prod,dc,ic,isc) \
|
||||
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS | \
|
||||
USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
|
||||
.idVendor = (vend), \
|
||||
.idProduct = (prod),\
|
||||
.bDeviceClass = (dc),\
|
||||
.bInterfaceClass = (ic), \
|
||||
.bInterfaceSubClass = (isc),
|
||||
#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \
|
||||
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
|
||||
USB_DEVICE_ID_MATCH_DEV_CLASS | \
|
||||
USB_DEVICE_ID_MATCH_INT_CLASS | \
|
||||
USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
|
||||
.idVendor = (vend), \
|
||||
.idProduct = (prod),\
|
||||
.bDeviceClass = (dc),\
|
||||
.bInterfaceClass = (ic), \
|
||||
.bInterfaceSubClass = (isc),
|
||||
|
||||
static struct usb_device_id id_table[] = {
|
||||
{MY_USB_DEVICE (0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Itsy
|
||||
{MY_USB_DEVICE (0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Calypso
|
||||
{MY_USB_DEVICE (0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Iris
|
||||
{MY_USB_DEVICE (0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
|
||||
{MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
|
||||
{MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
|
||||
{MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Sharp tmp
|
||||
// extra null entry for module
|
||||
// vendor/produc parameters
|
||||
{MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
|
||||
{} // terminating entry
|
||||
{MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Itsy */
|
||||
{MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Calypso */
|
||||
{MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Iris */
|
||||
{MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */
|
||||
{MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */
|
||||
{MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */
|
||||
{MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Sharp tmp */
|
||||
/* extra null entry for module vendor/produc parameters */
|
||||
{MY_USB_DEVICE(0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
|
||||
{} /* terminating entry */
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE (usb, id_table);
|
||||
MODULE_DEVICE_TABLE(usb, id_table);
|
||||
|
||||
static struct usb_driver safe_driver = {
|
||||
.name = "safe_serial",
|
||||
@ -156,29 +159,45 @@ static struct usb_driver safe_driver = {
|
||||
};
|
||||
|
||||
static const __u16 crc10_table[256] = {
|
||||
0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
|
||||
0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
|
||||
0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
|
||||
0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac, 0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
|
||||
0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b, 0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
|
||||
0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a, 0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
|
||||
0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259, 0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
|
||||
0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268, 0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
|
||||
0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377, 0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
|
||||
0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346, 0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
|
||||
0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315, 0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
|
||||
0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324, 0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
|
||||
0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3, 0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
|
||||
0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382, 0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
|
||||
0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1, 0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
|
||||
0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0, 0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
|
||||
0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
|
||||
0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
|
||||
0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce,
|
||||
0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
|
||||
0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d,
|
||||
0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
|
||||
0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac,
|
||||
0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
|
||||
0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b,
|
||||
0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
|
||||
0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a,
|
||||
0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
|
||||
0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259,
|
||||
0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
|
||||
0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268,
|
||||
0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
|
||||
0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377,
|
||||
0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
|
||||
0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346,
|
||||
0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
|
||||
0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315,
|
||||
0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
|
||||
0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324,
|
||||
0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
|
||||
0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3,
|
||||
0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
|
||||
0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382,
|
||||
0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
|
||||
0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1,
|
||||
0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
|
||||
0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0,
|
||||
0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
|
||||
};
|
||||
|
||||
#define CRC10_INITFCS 0x000 // Initial FCS value
|
||||
#define CRC10_GOODFCS 0x000 // Good final FCS value
|
||||
#define CRC10_FCS(fcs, c) ( (((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
|
||||
#define CRC10_INITFCS 0x000 /* Initial FCS value */
|
||||
#define CRC10_GOODFCS 0x000 /* Good final FCS value */
|
||||
#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
|
||||
|
||||
/**
|
||||
/**
|
||||
* fcs_compute10 - memcpy and calculate 10 bit CRC across buffer
|
||||
* @sp: pointer to buffer
|
||||
* @len: number of bytes
|
||||
@ -187,13 +206,13 @@ static const __u16 crc10_table[256] = {
|
||||
* Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
|
||||
* new 10 bit FCS.
|
||||
*/
|
||||
static __u16 __inline__ fcs_compute10 (unsigned char *sp, int len, __u16 fcs)
|
||||
static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
|
||||
{
|
||||
for (; len-- > 0; fcs = CRC10_FCS (fcs, *sp++));
|
||||
for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
|
||||
return fcs;
|
||||
}
|
||||
|
||||
static void safe_read_bulk_callback (struct urb *urb)
|
||||
static void safe_read_bulk_callback(struct urb *urb)
|
||||
{
|
||||
struct usb_serial_port *port = urb->context;
|
||||
unsigned char *data = urb->transfer_buffer;
|
||||
@ -201,7 +220,7 @@ static void safe_read_bulk_callback (struct urb *urb)
|
||||
int result;
|
||||
int status = urb->status;
|
||||
|
||||
dbg ("%s", __func__);
|
||||
dbg("%s", __func__);
|
||||
|
||||
if (status) {
|
||||
dbg("%s - nonzero read bulk status received: %d",
|
||||
@ -209,50 +228,55 @@ static void safe_read_bulk_callback (struct urb *urb)
|
||||
return;
|
||||
}
|
||||
|
||||
dbg ("safe_read_bulk_callback length: %d", port->read_urb->actual_length);
|
||||
dbg("safe_read_bulk_callback length: %d",
|
||||
port->read_urb->actual_length);
|
||||
#ifdef ECHO_RCV
|
||||
{
|
||||
int i;
|
||||
unsigned char *cp = port->read_urb->transfer_buffer;
|
||||
for (i = 0; i < port->read_urb->actual_length; i++) {
|
||||
if ((i % 32) == 0) {
|
||||
printk ("\nru[%02x] ", i);
|
||||
}
|
||||
printk ("%02x ", *cp++);
|
||||
if ((i % 32) == 0)
|
||||
printk("\nru[%02x] ", i);
|
||||
printk("%02x ", *cp++);
|
||||
}
|
||||
printk ("\n");
|
||||
printk("\n");
|
||||
}
|
||||
#endif
|
||||
if (safe) {
|
||||
__u16 fcs;
|
||||
if (!(fcs = fcs_compute10 (data, length, CRC10_INITFCS))) {
|
||||
fcs = fcs_compute10(data, length, CRC10_INITFCS);
|
||||
if (!fcs) {
|
||||
int actual_length = data[length - 2] >> 2;
|
||||
if (actual_length <= (length - 2)) {
|
||||
info ("%s - actual: %d", __func__, actual_length);
|
||||
tty_insert_flip_string(port->port.tty, data, actual_length);
|
||||
tty_flip_buffer_push (port->port.tty);
|
||||
info("%s - actual: %d", __func__,
|
||||
actual_length);
|
||||
tty_insert_flip_string(port->port.tty,
|
||||
data, actual_length);
|
||||
tty_flip_buffer_push(port->port.tty);
|
||||
} else {
|
||||
err ("%s - inconsistent lengths %d:%d", __func__,
|
||||
actual_length, length);
|
||||
err("%s - inconsistent lengths %d:%d",
|
||||
__func__, actual_length, length);
|
||||
}
|
||||
} else {
|
||||
err ("%s - bad CRC %x", __func__, fcs);
|
||||
err("%s - bad CRC %x", __func__, fcs);
|
||||
}
|
||||
} else {
|
||||
tty_insert_flip_string(port->port.tty, data, length);
|
||||
tty_flip_buffer_push (port->port.tty);
|
||||
tty_flip_buffer_push(port->port.tty);
|
||||
}
|
||||
|
||||
/* Continue trying to always read */
|
||||
usb_fill_bulk_urb (urb, port->serial->dev,
|
||||
usb_rcvbulkpipe (port->serial->dev, port->bulk_in_endpointAddress),
|
||||
urb->transfer_buffer, urb->transfer_buffer_length,
|
||||
safe_read_bulk_callback, port);
|
||||
usb_fill_bulk_urb(urb, port->serial->dev,
|
||||
usb_rcvbulkpipe(port->serial->dev,
|
||||
port->bulk_in_endpointAddress),
|
||||
urb->transfer_buffer, urb->transfer_buffer_length,
|
||||
safe_read_bulk_callback, port);
|
||||
|
||||
if ((result = usb_submit_urb (urb, GFP_ATOMIC))) {
|
||||
err ("%s - failed resubmitting read urb, error %d", __func__, result);
|
||||
result = usb_submit_urb(urb, GFP_ATOMIC);
|
||||
if (result)
|
||||
err("%s - failed resubmitting read urb, error %d",
|
||||
__func__, result);
|
||||
/* FIXME: Need a mechanism to retry later if this happens */
|
||||
}
|
||||
}
|
||||
|
||||
static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
|
||||
@ -263,23 +287,23 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
|
||||
int i;
|
||||
int packet_length;
|
||||
|
||||
dbg ("safe_write port: %p %d urb: %p count: %d", port, port->number, port->write_urb,
|
||||
count);
|
||||
dbg("safe_write port: %p %d urb: %p count: %d",
|
||||
port, port->number, port->write_urb, count);
|
||||
|
||||
if (!port->write_urb) {
|
||||
dbg ("%s - write urb NULL", __func__);
|
||||
dbg("%s - write urb NULL", __func__);
|
||||
return 0;
|
||||
}
|
||||
|
||||
dbg ("safe_write write_urb: %d transfer_buffer_length",
|
||||
dbg("safe_write write_urb: %d transfer_buffer_length",
|
||||
port->write_urb->transfer_buffer_length);
|
||||
|
||||
if (!port->write_urb->transfer_buffer_length) {
|
||||
dbg ("%s - write urb transfer_buffer_length zero", __func__);
|
||||
dbg("%s - write urb transfer_buffer_length zero", __func__);
|
||||
return 0;
|
||||
}
|
||||
if (count == 0) {
|
||||
dbg ("%s - write request of 0 bytes", __func__);
|
||||
dbg("%s - write request of 0 bytes", __func__);
|
||||
return 0;
|
||||
}
|
||||
spin_lock_bh(&port->lock);
|
||||
@ -291,63 +315,64 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
|
||||
port->write_urb_busy = 1;
|
||||
spin_unlock_bh(&port->lock);
|
||||
|
||||
packet_length = port->bulk_out_size; // get max packetsize
|
||||
packet_length = port->bulk_out_size; /* get max packetsize */
|
||||
|
||||
i = packet_length - (safe ? 2 : 0); // get bytes to send
|
||||
i = packet_length - (safe ? 2 : 0); /* get bytes to send */
|
||||
count = (count > i) ? i : count;
|
||||
|
||||
|
||||
// get the data into the transfer buffer
|
||||
/* get the data into the transfer buffer */
|
||||
data = port->write_urb->transfer_buffer;
|
||||
memset (data, '0', packet_length);
|
||||
memset(data, '0', packet_length);
|
||||
|
||||
memcpy (data, buf, count);
|
||||
memcpy(data, buf, count);
|
||||
|
||||
if (safe) {
|
||||
__u16 fcs;
|
||||
|
||||
// pad if necessary
|
||||
if (!padded) {
|
||||
/* pad if necessary */
|
||||
if (!padded)
|
||||
packet_length = count + 2;
|
||||
}
|
||||
// set count
|
||||
/* set count */
|
||||
data[packet_length - 2] = count << 2;
|
||||
data[packet_length - 1] = 0;
|
||||
|
||||
// compute fcs and insert into trailer
|
||||
fcs = fcs_compute10 (data, packet_length, CRC10_INITFCS);
|
||||
/* compute fcs and insert into trailer */
|
||||
fcs = fcs_compute10(data, packet_length, CRC10_INITFCS);
|
||||
data[packet_length - 2] |= fcs >> 8;
|
||||
data[packet_length - 1] |= fcs & 0xff;
|
||||
|
||||
// set length to send
|
||||
/* set length to send */
|
||||
port->write_urb->transfer_buffer_length = packet_length;
|
||||
} else {
|
||||
port->write_urb->transfer_buffer_length = count;
|
||||
}
|
||||
|
||||
usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
|
||||
usb_serial_debug_data(debug, &port->dev, __func__, count,
|
||||
port->write_urb->transfer_buffer);
|
||||
#ifdef ECHO_TX
|
||||
{
|
||||
int i;
|
||||
unsigned char *cp = port->write_urb->transfer_buffer;
|
||||
for (i = 0; i < port->write_urb->transfer_buffer_length; i++) {
|
||||
if ((i % 32) == 0) {
|
||||
printk ("\nsu[%02x] ", i);
|
||||
}
|
||||
printk ("%02x ", *cp++);
|
||||
if ((i % 32) == 0)
|
||||
printk("\nsu[%02x] ", i);
|
||||
printk("%02x ", *cp++);
|
||||
}
|
||||
printk ("\n");
|
||||
printk("\n");
|
||||
}
|
||||
#endif
|
||||
port->write_urb->dev = port->serial->dev;
|
||||
if ((result = usb_submit_urb (port->write_urb, GFP_KERNEL))) {
|
||||
result = usb_submit_urb(port->write_urb, GFP_KERNEL);
|
||||
if (result) {
|
||||
port->write_urb_busy = 0;
|
||||
err ("%s - failed submitting write urb, error %d", __func__, result);
|
||||
err("%s - failed submitting write urb, error %d",
|
||||
__func__, result);
|
||||
return 0;
|
||||
}
|
||||
dbg ("%s urb: %p submitted", __func__, port->write_urb);
|
||||
dbg("%s urb: %p submitted", __func__, port->write_urb);
|
||||
|
||||
return (count);
|
||||
return count;
|
||||
}
|
||||
|
||||
static int safe_write_room(struct tty_struct *tty)
|
||||
@ -356,21 +381,19 @@ static int safe_write_room(struct tty_struct *tty)
|
||||
int room = 0; /* Default: no room */
|
||||
unsigned long flags;
|
||||
|
||||
dbg ("%s", __func__);
|
||||
dbg("%s", __func__);
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
if (port->write_urb_busy)
|
||||
room = port->bulk_out_size - (safe ? 2 : 0);
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
|
||||
if (room) {
|
||||
dbg ("safe_write_room returns %d", room);
|
||||
}
|
||||
|
||||
if (room)
|
||||
dbg("safe_write_room returns %d", room);
|
||||
return room;
|
||||
}
|
||||
|
||||
static int safe_startup (struct usb_serial *serial)
|
||||
static int safe_startup(struct usb_serial *serial)
|
||||
{
|
||||
switch (serial->interface->cur_altsetting->desc.bInterfaceProtocol) {
|
||||
case LINEO_SAFESERIAL_CRC:
|
||||
@ -398,17 +421,18 @@ static struct usb_serial_driver safe_device = {
|
||||
.attach = safe_startup,
|
||||
};
|
||||
|
||||
static int __init safe_init (void)
|
||||
static int __init safe_init(void)
|
||||
{
|
||||
int i, retval;
|
||||
|
||||
info (DRIVER_VERSION " " DRIVER_AUTHOR);
|
||||
info (DRIVER_DESC);
|
||||
info ("vendor: %x product: %x safe: %d padded: %d\n", vendor, product, safe, padded);
|
||||
info(DRIVER_VERSION " " DRIVER_AUTHOR);
|
||||
info(DRIVER_DESC);
|
||||
info("vendor: %x product: %x safe: %d padded: %d\n",
|
||||
vendor, product, safe, padded);
|
||||
|
||||
// if we have vendor / product parameters patch them into id list
|
||||
/* if we have vendor / product parameters patch them into id list */
|
||||
if (vendor || product) {
|
||||
info ("vendor: %x product: %x\n", vendor, product);
|
||||
info("vendor: %x product: %x\n", vendor, product);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(id_table); i++) {
|
||||
if (!id_table[i].idVendor && !id_table[i].idProduct) {
|
||||
@ -433,11 +457,11 @@ failed_usb_serial_register:
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void __exit safe_exit (void)
|
||||
static void __exit safe_exit(void)
|
||||
{
|
||||
usb_deregister (&safe_driver);
|
||||
usb_serial_deregister (&safe_device);
|
||||
usb_deregister(&safe_driver);
|
||||
usb_serial_deregister(&safe_device);
|
||||
}
|
||||
|
||||
module_init (safe_init);
|
||||
module_exit (safe_exit);
|
||||
module_init(safe_init);
|
||||
module_exit(safe_exit);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user