leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

media: dt-bindings: add bindings for i.MX7 media driver

Browse Source 
Add bindings documentation for i.MX7 media drivers.
The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit is contained in:
Rui Miguel Silva 2019-02-06 10:13:18 -05:00 committed by Mauro Carvalho Chehab
parent 67673ed550
commit 3f44193780
2 changed files with 135 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
Documentation/devicetree/bindings/media/imx7-csi.txt Normal file
View File

@ -0,0 +1,45 @@
Freescale i.MX7 CMOS Sensor Interface
=====================================
csi node
--------
This is device node for the CMOS Sensor Interface (CSI) which enables the chip
to connect directly to external CMOS image sensors.
Required properties:
- compatible : "fsl,imx7-csi";
- reg : base address and length of the register set for the device;
- interrupts : should contain CSI interrupt;
- clocks : list of clock specifiers, see
Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
- clock-names : must contain "axi", "mclk" and "dcic" entries, matching
entries in the clock property;
The device node shall contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in:
Documentation/devicetree/bindings/media/video-interfaces.txt.
In the following example a remote endpoint is a video multiplexer.
example:
csi: csi@30710000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7-csi";
reg = <0x30710000 0x10000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CSI_MCLK_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "axi", "mclk", "dcic";
port {
csi_from_csi_mux: endpoint {
remote-endpoint = <&csi_mux_to_csi>;
};
};
};

90
Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt Normal file
View File

@ -0,0 +1,90 @@
Freescale i.MX7 Mipi CSI2
=========================
mipi_csi2 node
--------------
This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
compatible with previous version of Samsung D-phy.
Required properties:
- compatible : "fsl,imx7-mipi-csi2";
- reg : base address and length of the register set for the device;
- interrupts : should contain MIPI CSIS interrupt;
- clocks : list of clock specifiers, see
Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
- clock-names : must contain "pclk", "wrap" and "phy" entries, matching
entries in the clock property;
- power-domains : a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
- reset-names : should include following entry "mrst";
- resets : a list of phandle, should contain reset entry of
reset-names;
- phy-supply : from the generic phy bindings, a phandle to a regulator that
provides power to MIPI CSIS core;
Optional properties:
- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
value when this property is not specified is 166 MHz;
- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
The device node should contain two 'port' child nodes with one child 'endpoint'
node, according to the bindings defined in:
Documentation/devicetree/bindings/ media/video-interfaces.txt.
The following are properties specific to those nodes.
port node
---------
- reg : (required) can take the values 0 or 1, where 0 shall be
related to the sink port and port 1 shall be the source
one;
endpoint node
-------------
- data-lanes : (required) an array specifying active physical MIPI-CSI2
data input lanes and their mapping to logical lanes; this
shall only be applied to port 0 (sink port), the array's
content is unused only its length is meaningful,
in this case the maximum length supported is 2;
example:
mipi_csi: mipi-csi@30750000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7-mipi-csi2";
reg = <0x30750000 0x10000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
<&clks IMX7D_MIPI_CSI_ROOT_CLK>,
<&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
clock-names = "pclk", "wrap", "phy";
clock-frequency = <166000000>;
power-domains = <&pgc_mipi_phy>;
phy-supply = <&reg_1p0d>;
resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
reset-names = "mrst";
fsl,csis-hs-settle = <3>;
port@0 {
reg = <0>;
mipi_from_sensor: endpoint {
remote-endpoint = <&ov2680_to_mipi>;
data-lanes = <1>;
};
};
port@1 {
reg = <1>;
mipi_vc0_to_csi_mux: endpoint {
remote-endpoint = <&csi_mux_from_mipi_vc0>;
};
};
};