leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: dts: imx7d-sdb: add rev-a board support

Browse Source 
Current imx7d-sdb.dts has some incorrect settings about
Rev-A and Rev-B boards, some of the settings are based on
Rev-A board but some are based on Rev-B board, clean up it
by adding i.MX7D SDB Rev-A board support, make default
imx7d-sdb.dts for Rev-B board as usual, and introduce
imx7d-sdb-reva.dts for Rev-A board. Below are the affected
differences of Rev-A and Rev-B board:

                Rev-A           Rev-B
USB_OTG2_PWR:   UART3_CTS_B     GPIO1_IO07
ENET_EN_B:      None            GPIO1_IO04
TP_INT_B:       EPDC_DATA13     EPDC_BDR1

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Anson Huang 2018-11-20 01:35:34 +00:00 committed by Shawn Guo
parent 4d8aa0097d
commit 3f343ec3ea
3 changed files with 67 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/boot/dts/Makefile
View File

@ -574,6 +574,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-pico-pi.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \
imx7d-sdb-reva.dtb \
imx7d-sdb-sht11.dtb \
imx7s-colibri-eval-v3.dtb \
imx7s-warp.dtb

40
arch/arm/boot/dts/imx7d-sdb-reva.dts Normal file
View File

@ -0,0 +1,40 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Copyright (C) 2015 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx7d-sdb.dts"
/ {
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
};
};
&fec2 {
/delete-property/phy-supply;
};
&iomuxc {
imx7d-sdb {
pinctrl_tsc2046_pendown: tsc2046_pendown {
fsl,pins = <
MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
>;
};
pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
>;
};
};
};

28
arch/arm/boot/dts/imx7d-sdb.dts
View File

@ -72,9 +72,11 @@
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@ -115,6 +117,16 @@
gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
reg_fec2_3v3: regulator-fec2-3v3 {
compatible = "regulator-fixed";
regulator-name = "fec2-3v3";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000 0>;
@ -211,6 +223,7 @@
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
phy-supply = <&reg_fec2_3v3>;
fsl,magic-packet;
status = "okay";
};
@ -492,6 +505,12 @@
>;
};
pinctrl_enet2_reg: enet2reggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
@ -514,7 +533,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
>;
};
@ -736,4 +754,10 @@
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30
>;
};
pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
>;
};
};