Biggest part is the addition of the rk3288 variant of the VMARC
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes with it as the underlying Dalang carrier board is shared by both an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10). Other than that rk3288 gets its ohci node added that only works on the fixed rk3288w variant of the soc and some asorted fixes and improvements for dt-binding-check. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl8YzOAQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgY9aB/0folCAovUA97bILQR/62PspVGR1i/S2GJe sQqKuWDyBtJNM3IYNVMd/AtcrP+U0ZD4MX6TKbabs+ZuIc4EksXRroMTMm2azme1 rOrQuGSKcdhPobJOHlpbSC/QPWWi5GGGWDnwXY8T68NedeYLP/o8sOmZQtUi80R9 ueP5ZwiviwMrVzRITPb8sB89WEyRqaas2H0fc/4OjGRY/jeTKwCk9sP/JytA6gUB /GXn+uUk5WcRkekujBi1LVi4BIhm7PMW9kM1AHWAV6+2Yd8uFyG4ut9MB7SmaQt8 QfEoPpLvQicpZCVB3VFOPJ38z4YuOXsqo85u8T3ZkgpLdInoa/J9 =GUhq -----END PGP SIGNATURE----- Merge tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Biggest part is the addition of the rk3288 variant of the VMARC SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes with it as the underlying Dalang carrier board is shared by both an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10). Other than that rk3288 gets its ohci node added that only works on the fixed rk3288w variant of the soc and some asorted fixes and improvements for dt-binding-check. * tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add PCIe for RockPI N10 ARM: dts: rockchip: Add HDMI out for RockPI N8/N10 ARM: dts: rockchip: Add USB for RockPI N8/N10 ARM: dts: rockchip: Add usb host0 ohci node for rk3288 ARM: dts: rockchip: Fix VBUS on rk3288-vyasa ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support ARM: dts: rockchip: Add VMARC RK3288 SOM initial support dt-bindings: arm: rockchip: Add Rock Pi N8 binding arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac ARM: dts: rockchip: Add marvell BT irq config ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
3ed75c545d
@ -435,6 +435,12 @@ properties:
|
||||
- const: radxa,rockpi4
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Radxa ROCK Pi N8
|
||||
items:
|
||||
- const: radxa,rockpi-n8
|
||||
- const: vamrs,rk3288-vmarc-som
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Radxa ROCK Pi N10
|
||||
items:
|
||||
- const: radxa,rockpi-n10
|
||||
|
||||
@ -982,6 +982,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
||||
rk3288-popmetal.dtb \
|
||||
rk3288-r89.dtb \
|
||||
rk3288-rock2-square.dtb \
|
||||
rk3288-rock-pi-n8.dtb \
|
||||
rk3288-tinker.dtb \
|
||||
rk3288-tinker-s.dtb \
|
||||
rk3288-veyron-brain.dtb \
|
||||
|
||||
@ -67,6 +67,7 @@
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMAC2>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
@ -107,6 +107,7 @@
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMAC>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
@ -520,9 +521,9 @@
|
||||
resets = <&cru SRST_TSADC>;
|
||||
reset-names = "tsadc-apb";
|
||||
pinctrl-names = "init", "default", "sleep";
|
||||
pinctrl-0 = <&otp_gpio>;
|
||||
pinctrl-0 = <&otp_pin>;
|
||||
pinctrl-1 = <&otp_out>;
|
||||
pinctrl-2 = <&otp_gpio>;
|
||||
pinctrl-2 = <&otp_pin>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
rockchip,hw-tshut-temp = <95000>;
|
||||
status = "disabled";
|
||||
@ -1111,7 +1112,7 @@
|
||||
};
|
||||
|
||||
tsadc {
|
||||
otp_gpio: otp-gpio {
|
||||
otp_pin: otp-pin {
|
||||
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
|
||||
17
arch/arm/boot/dts/rk3288-rock-pi-n8.dts
Normal file
17
arch/arm/boot/dts/rk3288-rock-pi-n8.dts
Normal file
@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
||||
* Copyright (c) 2019 Vamrs Limited
|
||||
* Copyright (c) 2019 Amarula Solutions(India)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3288.dtsi"
|
||||
#include <arm/rockchip-radxa-dalang-carrier.dtsi>
|
||||
#include "rk3288-vmarc-som.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi N8";
|
||||
compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som",
|
||||
"rockchip,rk3288";
|
||||
};
|
||||
@ -44,10 +44,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
btmrvl: btmrvl@2 {
|
||||
compatible = "marvell,sd8897-bt";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
|
||||
marvell,wakeup-pin = /bits/ 16 <13>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
||||
&sdmmc_bus4>;
|
||||
};
|
||||
|
||||
|
||||
@ -192,7 +192,7 @@
|
||||
&sdmmc {
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
||||
&sdmmc_bus4>;
|
||||
};
|
||||
|
||||
|
||||
@ -18,8 +18,8 @@
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
&sdmmc_wp_gpio &sdmmc_bus4>;
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
||||
&sdmmc_wp_pin &sdmmc_bus4>;
|
||||
wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/delete-property/ disable-wp;
|
||||
@ -27,7 +27,7 @@
|
||||
|
||||
&pinctrl {
|
||||
sdmmc {
|
||||
sdmmc_wp_gpio: sdmmc-wp-gpio {
|
||||
sdmmc_wp_pin: sdmmc-wp-pin {
|
||||
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -114,7 +114,7 @@
|
||||
&sdmmc {
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
||||
&sdmmc_bus4>;
|
||||
};
|
||||
|
||||
|
||||
@ -105,7 +105,7 @@
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_wp_gpio: sdmmc-wp-gpio {
|
||||
sdmmc_wp_pin: sdmmc-wp-pin {
|
||||
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
@ -126,8 +126,8 @@
|
||||
|
||||
&sdmmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
&sdmmc_wp_gpio &sdmmc_bus4>;
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
||||
&sdmmc_wp_pin &sdmmc_bus4>;
|
||||
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
|
||||
@ -41,7 +41,7 @@
|
||||
};
|
||||
|
||||
/* This is where we actually hook up CD */
|
||||
sdmmc_cd_gpio: sdmmc-cd-gpio {
|
||||
sdmmc_cd_pin: sdmmc-cd-pin {
|
||||
rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -54,7 +54,7 @@
|
||||
&sdmmc {
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
||||
&sdmmc_bus4>;
|
||||
};
|
||||
|
||||
|
||||
322
arch/arm/boot/dts/rk3288-vmarc-som.dtsi
Normal file
322
arch/arm/boot/dts/rk3288-vmarc-som.dtsi
Normal file
@ -0,0 +1,322 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
||||
* Copyright (c) 2019 Vamrs Limited
|
||||
* Copyright (c) 2019 Amarula Solutions(India)
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
|
||||
/ {
|
||||
compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
|
||||
|
||||
vccio_flash: vccio-flash-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_flash";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
vqmmc-supply = <&vccio_flash>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
phy-supply = <&vcc_io>;
|
||||
snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c5>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec_c0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int &global_pwroff>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc_io>;
|
||||
vcc9-supply = <&vcc_io>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc5v0_sys>;
|
||||
vcc12-supply = <&vcc_io>;
|
||||
vddio-supply = <&vcc_io>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-ramp-delay = <6000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-name = "vcc_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_tp: LDO_REG1 {
|
||||
regulator-name = "vcc_tp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_codec: LDO_REG2 {
|
||||
regulator-name = "vcca_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-name = "vdd_10";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_wl: LDO_REG4 {
|
||||
regulator-name = "vcc_wl";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd10_lcd: LDO_REG6 {
|
||||
regulator-name = "vdd10_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG7 {
|
||||
regulator-name = "vcc_18";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc18_lcd: LDO_REG8 {
|
||||
regulator-name = "vcc18_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: SWITCH_REG1 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd: SWITCH_REG2 {
|
||||
regulator-name = "vcc_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
bb-supply = <&vcc_io>;
|
||||
flash0-supply = <&vccio_flash>;
|
||||
gpio1830-supply = <&vcc_18>;
|
||||
gpio30-supply = <&vcc_io>;
|
||||
sdcard-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
||||
bias-pull-up;
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_bus4: sdmmc-bus4 {
|
||||
rockchip,pins =
|
||||
<6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_clk: sdmmc-clk {
|
||||
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_cmd: sdmmc-cmd {
|
||||
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus_host {
|
||||
usb1_en_oc: usb1-en-oc {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus_typec {
|
||||
usb0_en_oc: usb0-en-oc {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vbus_host {
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
|
||||
};
|
||||
|
||||
&vbus_typec {
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
|
||||
};
|
||||
@ -99,8 +99,6 @@
|
||||
pinctrl-0 = <&otg_vbus_drv>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vsus_5v>;
|
||||
};
|
||||
|
||||
@ -416,6 +414,7 @@
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
vbus-supply = <&vusb1_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@ -167,6 +167,7 @@
|
||||
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMAC2>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
@ -178,6 +179,7 @@
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMAC1>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
@ -190,6 +192,7 @@
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMAC1>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
@ -574,9 +577,9 @@
|
||||
resets = <&cru SRST_TSADC>;
|
||||
reset-names = "tsadc-apb";
|
||||
pinctrl-names = "init", "default", "sleep";
|
||||
pinctrl-0 = <&otp_gpio>;
|
||||
pinctrl-0 = <&otp_pin>;
|
||||
pinctrl-1 = <&otp_out>;
|
||||
pinctrl-2 = <&otp_gpio>;
|
||||
pinctrl-2 = <&otp_pin>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
rockchip,grf = <&grf>;
|
||||
rockchip,hw-tshut-temp = <95000>;
|
||||
@ -613,7 +616,16 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* NOTE: ohci@ff520000 doesn't actually work on hardware */
|
||||
/* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
|
||||
usb_host0_ohci: usb@ff520000 {
|
||||
compatible = "generic-ohci";
|
||||
reg = <0x0 0xff520000 0x0 0x100>;
|
||||
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_USBHOST0>;
|
||||
phys = <&usbphy1>;
|
||||
phy-names = "usb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host1: usb@ff540000 {
|
||||
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
||||
@ -1929,7 +1941,7 @@
|
||||
};
|
||||
|
||||
tsadc {
|
||||
otp_gpio: otp-gpio {
|
||||
otp_pin: otp-pin {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
|
||||
@ -45,6 +45,7 @@
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
@ -56,6 +57,7 @@
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
@ -68,6 +70,7 @@
|
||||
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMA2>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
|
||||
@ -8,36 +8,66 @@
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vbus_host: vbus-host {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_en_oc>;
|
||||
regulator-name = "vbus_host"; /* HOST-5V */
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vbus_typec: vbus-typec {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_en_oc>;
|
||||
regulator-name = "vbus_typec";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <140>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
hym8563: hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
@ -52,10 +82,8 @@
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
@ -71,11 +99,18 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins =
|
||||
<4 RK_PD6 0 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -97,6 +97,7 @@
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
arm,pl330-broken-no-flushp;
|
||||
arm,pl330-periph-burst;
|
||||
clocks = <&cru ACLK_DMAC>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
@ -351,9 +352,9 @@
|
||||
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
|
||||
clock-names = "tsadc", "apb_pclk";
|
||||
pinctrl-names = "init", "default", "sleep";
|
||||
pinctrl-0 = <&otp_gpio>;
|
||||
pinctrl-0 = <&otp_pin>;
|
||||
pinctrl-1 = <&otp_out>;
|
||||
pinctrl-2 = <&otp_gpio>;
|
||||
pinctrl-2 = <&otp_pin>;
|
||||
resets = <&cru SRST_TSADC>;
|
||||
reset-names = "tsadc-apb";
|
||||
rockchip,hw-tshut-temp = <120000>;
|
||||
@ -728,7 +729,7 @@
|
||||
<0 RK_PC6 3 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
i2c2m1_gpio: i2c2m1-gpio {
|
||||
i2c2m1_pins: i2c2m1-pins {
|
||||
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
@ -740,7 +741,7 @@
|
||||
<1 RK_PD4 2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
i2c2m05v_gpio: i2c2m05v-gpio {
|
||||
i2c2m05v_pins: i2c2m05v-pins {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
@ -867,7 +868,7 @@
|
||||
rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
otp_gpio: otp-gpio {
|
||||
otp_pin: otp-pin {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
@ -886,7 +887,7 @@
|
||||
rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
uart0_rts_gpio: uart0-rts-gpio {
|
||||
uart0_rts_pin: uart0-rts-pin {
|
||||
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -8,11 +8,15 @@
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include "rk3399pro-vmarc-som.dtsi"
|
||||
#include <arm/rockchip-radxa-dalang-carrier.dtsi>
|
||||
#include "rk3399pro-vmarc-som.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK Pi N10";
|
||||
compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
|
||||
"rockchip,rk3399pro";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
};
|
||||
|
||||
@ -12,30 +12,16 @@
|
||||
/ {
|
||||
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
vcc3v3_pcie: vcc-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pwr>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -61,23 +47,20 @@
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <180>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
i2c-scl-rising-time-ns = <180>;
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
@ -171,7 +154,8 @@
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -206,7 +190,8 @@
|
||||
regulator-min-microvolt = <1850000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1850000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -297,11 +282,88 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
i2c-scl-rising-time-ns = <140>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
hym8563: hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
bt656-supply = <&vcca_1v8>;
|
||||
sdmmc-supply = <&vccio_sd>;
|
||||
gpio1830-supply = <&vccio_3v0>;
|
||||
sdmmc-supply = <&vccio_sd>;
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
max-link-speed = <2>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-0 = <&pcie_clkreqnb_cpm>;
|
||||
pinctrl-names = "default";
|
||||
vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */
|
||||
vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_pwr: pcie-pwr {
|
||||
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus_host {
|
||||
usb1_en_oc: usb1-en-oc {
|
||||
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus_typec {
|
||||
usb0_en_oc: usb0-en-oc {
|
||||
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
@ -317,17 +379,79 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
&sdmmc {
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
max-frequency = <150000000>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 RK_PC2 0 &pcfg_pull_up>;
|
||||
};
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
phy-supply = <&vbus_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vbus_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vbus_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vbus_host {
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_en_oc>;
|
||||
};
|
||||
|
||||
&vbus_typec {
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_en_oc>;
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user