leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[media] lirc_igorplugusb: remove

Browse Source 
This driver has been replaced by an rc-core driver for the same hardware.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This commit is contained in:
Sean Young 2014-10-23 17:58:23 -03:00 committed by Mauro Carvalho Chehab
parent b1c97193c6
commit 3e5907e695
3 changed files with 0 additions and 515 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/staging/media/lirc/Kconfig
View File

@ -18,12 +18,6 @@ config LIRC_BT829
help
Driver for the IR interface on BT829-based hardware
config LIRC_IGORPLUGUSB
tristate "Igor Cesko's USB IR Receiver"
depends on LIRC && USB
help
Driver for Igor Cesko's USB IR Receiver
config LIRC_IMON
tristate "Legacy SoundGraph iMON Receiver and Display"
depends on LIRC && USB

1
drivers/staging/media/lirc/Makefile
View File

@ -4,7 +4,6 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o

508
drivers/staging/media/lirc/lirc_igorplugusb.c
View File

@ -1,508 +0,0 @@
/*
* lirc_igorplugusb - USB remote support for LIRC
*
* Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware.
* See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm
*
* The device can only record bursts of up to 36 pulses/spaces.
* Works fine with RC5. Longer commands lead to device buffer overrun.
* (Maybe a better firmware or a microcontroller with more ram can help?)
*
* Version 0.1 [beta status]
*
* Copyright (C) 2004 Jan M. Hochstein
* <hochstein@algo.informatik.tu-darmstadt.de>
*
* This driver was derived from:
* Paul Miller <pmiller9@users.sourceforge.net>
* "lirc_atiusb" module
* Vladimir Dergachev <volodya@minspring.com>'s 2002
* "USB ATI Remote support" (input device)
* Adrian Dewhurst <sailor-lk@sailorfrag.net>'s 2002
* "USB StreamZap remote driver" (LIRC)
* Artur Lipowski <alipowski@kki.net.pl>'s 2002
* "lirc_dev" and "lirc_gpio" LIRC modules
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/usb.h>
#include <linux/time.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
/* module identification */
#define DRIVER_VERSION "0.2"
#define DRIVER_AUTHOR \
"Jan M. Hochstein <hochstein@algo.informatik.tu-darmstadt.de>"
#define DRIVER_DESC "Igorplug USB remote driver for LIRC"
#define DRIVER_NAME "lirc_igorplugusb"
/* One mode2 pulse/space has 4 bytes. */
#define CODE_LENGTH sizeof(int)
/* Igor's firmware cannot record bursts longer than 36. */
#define DEVICE_BUFLEN 36
/*
* Header at the beginning of the device's buffer:
* unsigned char data_length
* unsigned char data_start (!=0 means ring-buffer overrun)
* unsigned char counter (incremented by each burst)
*/
#define DEVICE_HEADERLEN 3
/* This is for the gap */
#define ADDITIONAL_LIRC_BYTES 2
/* times to poll per second */
#define SAMPLE_RATE 100
static int sample_rate = SAMPLE_RATE;
/**** Igor's USB Request Codes */
#define SET_INFRABUFFER_EMPTY 1
/**
* Params: none
* Answer: empty
*/
#define GET_INFRACODE 2
/**
* Params:
* wValue: offset to begin reading infra buffer
*
* Answer: infra data
*/
#define SET_DATAPORT_DIRECTION 3
/**
* Params:
* wValue: (byte) 1 bit for each data port pin (0=in, 1=out)
*
* Answer: empty
*/
#define GET_DATAPORT_DIRECTION 4
/**
* Params: none
*
* Answer: (byte) 1 bit for each data port pin (0=in, 1=out)
*/
#define SET_OUT_DATAPORT 5
/**
* Params:
* wValue: byte to write to output data port
*
* Answer: empty
*/
#define GET_OUT_DATAPORT 6
/**
* Params: none
*
* Answer: least significant 3 bits read from output data port
*/
#define GET_IN_DATAPORT 7
/**
* Params: none
*
* Answer: least significant 3 bits read from input data port
*/
#define READ_EEPROM 8
/**
* Params:
* wValue: offset to begin reading EEPROM
*
* Answer: EEPROM bytes
*/
#define WRITE_EEPROM 9
/**
* Params:
* wValue: offset to EEPROM byte
* wIndex: byte to write
*
* Answer: empty
*/
#define SEND_RS232 10
/**
* Params:
* wValue: byte to send
*
* Answer: empty
*/
#define RECV_RS232 11
/**
* Params: none
*
* Answer: byte received
*/
#define SET_RS232_BAUD 12
/**
* Params:
* wValue: byte to write to UART bit rate register (UBRR)
*
* Answer: empty
*/
#define GET_RS232_BAUD 13
/**
* Params: none
*
* Answer: byte read from UART bit rate register (UBRR)
*/
/* data structure for each usb remote */
struct igorplug {
/* usb */
struct usb_device *usbdev;
int devnum;
unsigned char *buf_in;
unsigned int len_in;
int in_space;
struct timeval last_time;
dma_addr_t dma_in;
/* lirc */
struct lirc_driver *d;
/* handle sending (init strings) */
int send_flags;
};
static int unregister_from_lirc(struct igorplug *ir)
{
struct lirc_driver *d;
int devnum;
devnum = ir->devnum;
d = ir->d;
if (!d) {
dev_err(&ir->usbdev->dev,
"%s: called with NULL lirc driver struct!\n", __func__);
return -EINVAL;
}
dev_dbg(&ir->usbdev->dev, "calling lirc_unregister_driver\n");
lirc_unregister_driver(d->minor);
return devnum;
}
static int set_use_inc(void *data)
{
struct igorplug *ir = data;
if (!ir) {
printk(DRIVER_NAME "[?]: set_use_inc called with no context\n");
return -EIO;
}
dev_dbg(&ir->usbdev->dev, "set use inc\n");
if (!ir->usbdev)
return -ENODEV;
return 0;
}
static void set_use_dec(void *data)
{
struct igorplug *ir = data;
if (!ir) {
printk(DRIVER_NAME "[?]: set_use_dec called with no context\n");
return;
}
dev_dbg(&ir->usbdev->dev, "set use dec\n");
}
static void send_fragment(struct igorplug *ir, struct lirc_buffer *buf,
int i, int max)
{
int code;
/* MODE2: pulse/space (PULSE_BIT) in 1us units */
while (i < max) {
/* 1 Igor-tick = 85.333333 us */
code = (unsigned int)ir->buf_in[i] * 85 +
(unsigned int)ir->buf_in[i] / 3;
ir->last_time.tv_usec += code;
if (ir->in_space)
code |= PULSE_BIT;
lirc_buffer_write(buf, (unsigned char *)&code);
/* 1 chunk = CODE_LENGTH bytes */
ir->in_space ^= 1;
++i;
}
}
/**
* Called in user context.
* return 0 if data was added to the buffer and
* -ENODATA if none was available. This should add some number of bits
* evenly divisible by code_length to the buffer
*/
static int igorplugusb_remote_poll(void *data, struct lirc_buffer *buf)
{
int ret;
struct igorplug *ir = (struct igorplug *)data;
if (!ir || !ir->usbdev) /* Has the device been removed? */
return -ENODEV;
memset(ir->buf_in, 0, ir->len_in);
ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
GET_INFRACODE, USB_TYPE_VENDOR | USB_DIR_IN,
0/* offset */, /*unused*/0,
ir->buf_in, ir->len_in,
/*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
if (ret > 0) {
int code, timediff;
struct timeval now;
/* ACK packet has 1 byte --> ignore */
if (ret < DEVICE_HEADERLEN)
return -ENODATA;
dev_dbg(&ir->usbdev->dev, "Got %d bytes. Header: %*ph\n",
ret, 3, ir->buf_in);
do_gettimeofday(&now);
timediff = now.tv_sec - ir->last_time.tv_sec;
if (timediff + 1 > PULSE_MASK / 1000000)
timediff = PULSE_MASK;
else {
timediff *= 1000000;
timediff += now.tv_usec - ir->last_time.tv_usec;
}
ir->last_time.tv_sec = now.tv_sec;
ir->last_time.tv_usec = now.tv_usec;
/* create leading gap */
code = timediff;
lirc_buffer_write(buf, (unsigned char *)&code);
ir->in_space = 1; /* next comes a pulse */
if (ir->buf_in[2] == 0)
send_fragment(ir, buf, DEVICE_HEADERLEN, ret);
else {
dev_warn(&ir->usbdev->dev,
"[%d]: Device buffer overrun.\n", ir->devnum);
/* HHHNNNNNNNNNNNOOOOOOOO H = header
<---[2]---> N = newer
<---------ret--------> O = older */
ir->buf_in[2] %= ret - DEVICE_HEADERLEN; /* sanitize */
/* keep even-ness to not desync pulse/pause */
send_fragment(ir, buf, DEVICE_HEADERLEN +
ir->buf_in[2] - (ir->buf_in[2] & 1), ret);
send_fragment(ir, buf, DEVICE_HEADERLEN,
DEVICE_HEADERLEN + ir->buf_in[2]);
}
ret = usb_control_msg(
ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
/*unused*/0, /*unused*/0,
/*dummy*/ir->buf_in, /*dummy*/ir->len_in,
/*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
if (ret < 0)
printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n",
ir->devnum, ret);
return 0;
} else if (ret < 0)
printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n",
ir->devnum, ret);
return -ENODATA;
}
static int igorplugusb_remote_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev;
struct usb_host_interface *idesc = NULL;
struct usb_endpoint_descriptor *ep;
struct igorplug *ir = NULL;
struct lirc_driver *driver = NULL;
int devnum, pipe, maxp;
char buf[63], name[128] = "";
int ret;
dev_dbg(&intf->dev, "%s: usb probe called.\n", __func__);
dev = interface_to_usbdev(intf);
idesc = intf->cur_altsetting;
if (idesc->desc.bNumEndpoints != 1)
return -ENODEV;
ep = &idesc->endpoint->desc;
if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
!= USB_DIR_IN)
|| (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_CONTROL)
return -ENODEV;
pipe = usb_rcvctrlpipe(dev, ep->bEndpointAddress);
devnum = dev->devnum;
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
dev_dbg(&intf->dev, "%s: bytes_in_key=%zu maxp=%d\n",
__func__, CODE_LENGTH, maxp);
ir = devm_kzalloc(&intf->dev, sizeof(*ir), GFP_KERNEL);
if (!ir)
return -ENOMEM;
driver = devm_kzalloc(&intf->dev, sizeof(*driver), GFP_KERNEL);
if (!driver)
return -ENOMEM;
ir->buf_in = usb_alloc_coherent(dev, DEVICE_BUFLEN + DEVICE_HEADERLEN,
GFP_ATOMIC, &ir->dma_in);
if (!ir->buf_in)
return -ENOMEM;
strcpy(driver->name, DRIVER_NAME " ");
driver->minor = -1;
driver->code_length = CODE_LENGTH * 8; /* in bits */
driver->features = LIRC_CAN_REC_MODE2;
driver->data = ir;
driver->chunk_size = CODE_LENGTH;
driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES;
driver->set_use_inc = &set_use_inc;
driver->set_use_dec = &set_use_dec;
driver->sample_rate = sample_rate; /* per second */
driver->add_to_buf = &igorplugusb_remote_poll;
driver->dev = &intf->dev;
driver->owner = THIS_MODULE;
ret = lirc_register_driver(driver);
if (ret < 0) {
usb_free_coherent(dev, DEVICE_BUFLEN + DEVICE_HEADERLEN,
ir->buf_in, ir->dma_in);
return ret;
}
driver->minor = ret;
ir->d = driver;
ir->devnum = devnum;
ir->usbdev = dev;
ir->len_in = DEVICE_BUFLEN + DEVICE_HEADERLEN;
ir->in_space = 1; /* First mode2 event is a space. */
do_gettimeofday(&ir->last_time);
if (dev->descriptor.iManufacturer
&& usb_string(dev, dev->descriptor.iManufacturer,
buf, sizeof(buf)) > 0)
strlcpy(name, buf, sizeof(name));
if (dev->descriptor.iProduct
&& usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0)
snprintf(name + strlen(name), sizeof(name) - strlen(name),
" %s", buf);
printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
dev->bus->busnum, devnum);
/* clear device buffer */
ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
/*unused*/0, /*unused*/0,
/*dummy*/ir->buf_in, /*dummy*/ir->len_in,
/*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
if (ret < 0)
printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n",
devnum, ret);
usb_set_intfdata(intf, ir);
return 0;
}
static void igorplugusb_remote_disconnect(struct usb_interface *intf)
{
struct usb_device *usbdev = interface_to_usbdev(intf);
struct igorplug *ir = usb_get_intfdata(intf);
struct device *dev = &intf->dev;
int devnum;
usb_set_intfdata(intf, NULL);
if (!ir || !ir->d)
return;
ir->usbdev = NULL;
usb_free_coherent(usbdev, ir->len_in, ir->buf_in, ir->dma_in);
devnum = unregister_from_lirc(ir);
dev_info(dev, DRIVER_NAME "[%d]: %s done\n", devnum, __func__);
}
static struct usb_device_id igorplugusb_remote_id_table[] = {
/* Igor Plug USB (Atmel's Manufact. ID) */
{ USB_DEVICE(0x03eb, 0x0002) },
/* Fit PC2 Infrared Adapter */
{ USB_DEVICE(0x03eb, 0x21fe) },
/* Terminating entry */
{ }
};
static struct usb_driver igorplugusb_remote_driver = {
.name = DRIVER_NAME,
.probe = igorplugusb_remote_probe,
.disconnect = igorplugusb_remote_disconnect,
.id_table = igorplugusb_remote_id_table
};
module_usb_driver(igorplugusb_remote_driver);
#include <linux/vermagic.h>
MODULE_INFO(vermagic, VERMAGIC_STRING);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, igorplugusb_remote_id_table);
module_param(sample_rate, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)");