forked from Minki/linux
[ARM] 4475/2: EM-x270 board support
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Mike Rapoport
Russell King
parent
b750a09385
commit
3d50527bbf
1265
arch/arm/configs/em_x270_defconfig
Normal file
1265
arch/arm/configs/em_x270_defconfig
Normal file
File diff suppressed because it is too large
Load Diff
@ -37,6 +37,10 @@ config MACH_TRIZEPS4
|
||||
bool "Keith und Koep Trizeps4 DIMM-Module"
|
||||
select PXA27x
|
||||
|
||||
config MACH_EM_X270
|
||||
bool "CompuLab EM-x270 platform"
|
||||
select PXA27x
|
||||
|
||||
endchoice
|
||||
|
||||
if PXA_SHARPSL
|
||||
|
||||
@ -18,6 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp
|
||||
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
|
||||
obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
|
||||
obj-$(CONFIG_MACH_TOSA) += tosa.o
|
||||
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
|
||||
|
||||
# Support for blinky lights
|
||||
led-y := leds.o
|
||||
|
||||
354
arch/arm/mach-pxa/em-x270.c
Normal file
354
arch/arm/mach-pxa/em-x270.c
Normal file
@ -0,0 +1,354 @@
|
||||
/*
|
||||
* Support for CompuLab EM-x270 platform
|
||||
*
|
||||
* Copyright (C) 2007 CompuLab, Ltd.
|
||||
* Author: Mike Rapoport <mike@compulab.co.il>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/irq.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/rtc-v3020.h>
|
||||
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/pxafb.h>
|
||||
#include <asm/arch/ohci.h>
|
||||
#include <asm/arch/mmc.h>
|
||||
#include <asm/arch/bitfield.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
/* GPIO IRQ usage */
|
||||
#define EM_X270_MMC_PD (105)
|
||||
#define EM_X270_ETHIRQ IRQ_GPIO(41)
|
||||
#define EM_X270_MMC_IRQ IRQ_GPIO(13)
|
||||
|
||||
static struct resource em_x270_dm9k_resource[] = {
|
||||
[0] = {
|
||||
.start = PXA_CS2_PHYS,
|
||||
.end = PXA_CS2_PHYS + 3,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = PXA_CS2_PHYS + 8,
|
||||
.end = PXA_CS2_PHYS + 8 + 0x3f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[2] = {
|
||||
.start = EM_X270_ETHIRQ,
|
||||
.end = EM_X270_ETHIRQ,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
}
|
||||
};
|
||||
|
||||
/* for the moment we limit ourselves to 32bit IO until some
|
||||
* better IO routines can be written and tested
|
||||
*/
|
||||
static struct dm9000_plat_data em_x270_dm9k_platdata = {
|
||||
.flags = DM9000_PLATF_32BITONLY,
|
||||
};
|
||||
|
||||
/* Ethernet device */
|
||||
static struct platform_device em_x270_dm9k = {
|
||||
.name = "dm9000",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
|
||||
.resource = em_x270_dm9k_resource,
|
||||
.dev = {
|
||||
.platform_data = &em_x270_dm9k_platdata,
|
||||
}
|
||||
};
|
||||
|
||||
/* audio device */
|
||||
static struct platform_device em_x270_audio = {
|
||||
.name = "pxa2xx-ac97",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
/* WM9712 touchscreen controller. Hopefully the driver will make it to
|
||||
* the mainstream sometime */
|
||||
static struct platform_device em_x270_ts = {
|
||||
.name = "wm97xx-ts",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
/* RTC */
|
||||
static struct resource em_x270_v3020_resource[] = {
|
||||
[0] = {
|
||||
.start = PXA_CS4_PHYS,
|
||||
.end = PXA_CS4_PHYS + 3,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct v3020_platform_data em_x270_v3020_platdata = {
|
||||
.leftshift = 0,
|
||||
};
|
||||
|
||||
static struct platform_device em_x270_rtc = {
|
||||
.name = "v3020",
|
||||
.num_resources = ARRAY_SIZE(em_x270_v3020_resource),
|
||||
.resource = em_x270_v3020_resource,
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &em_x270_v3020_platdata,
|
||||
}
|
||||
};
|
||||
|
||||
/* NAND flash */
|
||||
#define GPIO_NAND_CS (11)
|
||||
#define GPIO_NAND_RB (56)
|
||||
|
||||
static inline void nand_cs_on(void)
|
||||
{
|
||||
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
|
||||
}
|
||||
|
||||
static void nand_cs_off(void)
|
||||
{
|
||||
dsb();
|
||||
|
||||
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
|
||||
}
|
||||
|
||||
/* hardware specific access to control-lines */
|
||||
static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
|
||||
unsigned int ctrl)
|
||||
{
|
||||
struct nand_chip *this = mtd->priv;
|
||||
unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
|
||||
|
||||
dsb();
|
||||
|
||||
if (ctrl & NAND_CTRL_CHANGE) {
|
||||
if (ctrl & NAND_ALE)
|
||||
nandaddr |= (1 << 3);
|
||||
else
|
||||
nandaddr &= ~(1 << 3);
|
||||
if (ctrl & NAND_CLE)
|
||||
nandaddr |= (1 << 2);
|
||||
else
|
||||
nandaddr &= ~(1 << 2);
|
||||
if (ctrl & NAND_NCE)
|
||||
nand_cs_on();
|
||||
else
|
||||
nand_cs_off();
|
||||
}
|
||||
|
||||
dsb();
|
||||
this->IO_ADDR_W = (void __iomem *)nandaddr;
|
||||
if (dat != NAND_CMD_NONE)
|
||||
writel(dat, this->IO_ADDR_W);
|
||||
|
||||
dsb();
|
||||
}
|
||||
|
||||
/* read device ready pin */
|
||||
static int em_x270_nand_device_ready(struct mtd_info *mtd)
|
||||
{
|
||||
dsb();
|
||||
|
||||
return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
|
||||
}
|
||||
|
||||
static struct mtd_partition em_x270_partition_info[] = {
|
||||
[0] = {
|
||||
.name = "em_x270-0",
|
||||
.offset = 0,
|
||||
.size = SZ_4M,
|
||||
},
|
||||
[1] = {
|
||||
.name = "em_x270-1",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL
|
||||
},
|
||||
};
|
||||
|
||||
static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
|
||||
|
||||
struct platform_nand_data em_x270_nand_platdata = {
|
||||
.chip = {
|
||||
.nr_chips = 1,
|
||||
.chip_offset = 0,
|
||||
.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
|
||||
.partitions = em_x270_partition_info,
|
||||
.chip_delay = 20,
|
||||
.part_probe_types = em_x270_part_probes,
|
||||
},
|
||||
.ctrl = {
|
||||
.hwcontrol = 0,
|
||||
.dev_ready = em_x270_nand_device_ready,
|
||||
.select_chip = 0,
|
||||
.cmd_ctrl = em_x270_nand_cmd_ctl,
|
||||
},
|
||||
};
|
||||
|
||||
static struct resource em_x270_nand_resource[] = {
|
||||
[0] = {
|
||||
.start = PXA_CS1_PHYS,
|
||||
.end = PXA_CS1_PHYS + 12,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device em_x270_nand = {
|
||||
.name = "gen_nand",
|
||||
.num_resources = ARRAY_SIZE(em_x270_nand_resource),
|
||||
.resource = em_x270_nand_resource,
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &em_x270_nand_platdata,
|
||||
}
|
||||
};
|
||||
|
||||
/* platform devices */
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&em_x270_dm9k,
|
||||
&em_x270_audio,
|
||||
&em_x270_ts,
|
||||
&em_x270_rtc,
|
||||
&em_x270_nand,
|
||||
};
|
||||
|
||||
|
||||
/* PXA27x OHCI controller setup */
|
||||
static int em_x270_ohci_init(struct device *dev)
|
||||
{
|
||||
/* Set the Power Control Polarity Low */
|
||||
UHCHR = (UHCHR | UHCHR_PCPL) &
|
||||
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
|
||||
|
||||
/* enable port 2 transiever */
|
||||
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
|
||||
.port_mode = PMM_PERPORT_MODE,
|
||||
.init = em_x270_ohci_init,
|
||||
};
|
||||
|
||||
|
||||
static int em_x270_mci_init(struct device *dev,
|
||||
irq_handler_t em_x270_detect_int,
|
||||
void *data)
|
||||
{
|
||||
int err;
|
||||
|
||||
/* setup GPIO for PXA27x MMC controller */
|
||||
pxa_gpio_mode(GPIO32_MMCCLK_MD);
|
||||
pxa_gpio_mode(GPIO112_MMCCMD_MD);
|
||||
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
|
||||
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
|
||||
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
|
||||
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
|
||||
|
||||
/* EM-X270 uses GPIO13 as SD power enable */
|
||||
pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
|
||||
|
||||
err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
|
||||
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
|
||||
"MMC card detect", data);
|
||||
if (err) {
|
||||
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
|
||||
__FUNCTION__, err);
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
|
||||
{
|
||||
/*
|
||||
FIXME: current hardware implementation does not allow to
|
||||
enable/disable MMC power. This will be fixed in next HW releases,
|
||||
and we'll need to add implmentation here.
|
||||
*/
|
||||
return;
|
||||
}
|
||||
|
||||
static void em_x270_mci_exit(struct device *dev, void *data)
|
||||
{
|
||||
free_irq(EM_X270_MMC_IRQ, data);
|
||||
}
|
||||
|
||||
static struct pxamci_platform_data em_x270_mci_platform_data = {
|
||||
.ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
|
||||
.init = em_x270_mci_init,
|
||||
.setpower = em_x270_mci_setpower,
|
||||
.exit = em_x270_mci_exit,
|
||||
};
|
||||
|
||||
/* LCD 480x640 */
|
||||
static struct pxafb_mode_info em_x270_lcd_mode = {
|
||||
.pixclock = 50000,
|
||||
.bpp = 16,
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.hsync_len = 8,
|
||||
.vsync_len = 2,
|
||||
.left_margin = 8,
|
||||
.upper_margin = 0,
|
||||
.right_margin = 24,
|
||||
.lower_margin = 4,
|
||||
.cmap_greyscale = 0,
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info em_x270_lcd = {
|
||||
.modes = &em_x270_lcd_mode,
|
||||
.num_modes = 1,
|
||||
.cmap_inverse = 0,
|
||||
.cmap_static = 0,
|
||||
.lccr0 = LCCR0_PAS,
|
||||
.lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
|
||||
};
|
||||
|
||||
static void __init em_x270_init(void)
|
||||
{
|
||||
/* setup LCD */
|
||||
set_pxa_fb_info(&em_x270_lcd);
|
||||
|
||||
/* register EM-X270 platform devices */
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
|
||||
/* set MCI and OHCI platform parameters */
|
||||
pxa_set_mci_info(&em_x270_mci_platform_data);
|
||||
pxa_set_ohci_info(&em_x270_ohci_platform_data);
|
||||
|
||||
/* setup STUART GPIOs */
|
||||
pxa_gpio_mode(GPIO46_STRXD_MD);
|
||||
pxa_gpio_mode(GPIO47_STTXD_MD);
|
||||
|
||||
/* setup BTUART GPIOs */
|
||||
pxa_gpio_mode(GPIO42_BTRXD_MD);
|
||||
pxa_gpio_mode(GPIO43_BTTXD_MD);
|
||||
pxa_gpio_mode(GPIO44_BTCTS_MD);
|
||||
pxa_gpio_mode(GPIO45_BTRTS_MD);
|
||||
|
||||
/* Setup interrupt for dm9000 */
|
||||
set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
|
||||
}
|
||||
|
||||
MACHINE_START(EM_X270, "Compulab EM-x270")
|
||||
.boot_params = 0xa0000100,
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa27x_init_irq,
|
||||
.timer = &pxa_timer,
|
||||
.init_machine = em_x270_init,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue
Block a user