forked from Minki/linux
net: dsa: Add support for Marvell 88E6352
Marvell 88E6352 is mostly compatible to MV88E6123/61/65, but requires indirect phy access. Also, its configuration registers are a bit different. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Guenter Roeck
David S. Miller
parent
a93e464a45
commit
3ad50cca39
@ -5848,6 +5848,11 @@ M: Russell King <rmk+kernel@arm.linux.org.uk>
|
||||
S: Maintained
|
||||
F: drivers/gpu/drm/armada/
|
||||
|
||||
MARVELL 88E6352 DSA support
|
||||
M: Guenter Roeck <linux@roeck-us.net>
|
||||
S: Maintained
|
||||
F: drivers/net/dsa/mv88e6352.c
|
||||
|
||||
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
|
||||
M: Mirko Lindner <mlindner@marvell.com>
|
||||
M: Stephen Hemminger <stephen@networkplumber.org>
|
||||
|
||||
@ -45,6 +45,14 @@ config NET_DSA_MV88E6171
|
||||
This enables support for the Marvell 88E6171 ethernet switch
|
||||
chip.
|
||||
|
||||
config NET_DSA_MV88E6352
|
||||
tristate "Marvell 88E6352 ethernet switch chip support"
|
||||
select NET_DSA
|
||||
select NET_DSA_MV88E6XXX
|
||||
select NET_DSA_TAG_EDSA
|
||||
---help---
|
||||
This enables support for the Marvell 88E6352 ethernet switch chip.
|
||||
|
||||
config NET_DSA_BCM_SF2
|
||||
tristate "Broadcom Starfighter 2 Ethernet switch support"
|
||||
depends on HAS_IOMEM
|
||||
|
||||
@ -7,6 +7,9 @@ endif
|
||||
ifdef CONFIG_NET_DSA_MV88E6131
|
||||
mv88e6xxx_drv-y += mv88e6131.o
|
||||
endif
|
||||
ifdef CONFIG_NET_DSA_MV88E6352
|
||||
mv88e6xxx_drv-y += mv88e6352.o
|
||||
endif
|
||||
ifdef CONFIG_NET_DSA_MV88E6171
|
||||
mv88e6xxx_drv-y += mv88e6171.o
|
||||
endif
|
||||
|
||||
464
drivers/net/dsa/mv88e6352.c
Normal file
464
drivers/net/dsa/mv88e6352.c
Normal file
@ -0,0 +1,464 @@
|
||||
/*
|
||||
* net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
|
||||
*
|
||||
* Copyright (c) 2014 Guenter Roeck
|
||||
*
|
||||
* Derived from mv88e6123_61_65.c
|
||||
* Copyright (c) 2008-2009 Marvell Semiconductor
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/phy.h>
|
||||
#include <net/dsa.h>
|
||||
#include "mv88e6xxx.h"
|
||||
|
||||
static int mv88e6352_phy_wait(struct dsa_switch *ds)
|
||||
{
|
||||
unsigned long timeout = jiffies + HZ / 10;
|
||||
|
||||
while (time_before(jiffies, timeout)) {
|
||||
int ret;
|
||||
|
||||
ret = REG_READ(REG_GLOBAL2, 0x18);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (!(ret & 0x8000))
|
||||
return 0;
|
||||
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int __mv88e6352_phy_read(struct dsa_switch *ds, int addr, int regnum)
|
||||
{
|
||||
int ret;
|
||||
|
||||
REG_WRITE(REG_GLOBAL2, 0x18, 0x9800 | (addr << 5) | regnum);
|
||||
|
||||
ret = mv88e6352_phy_wait(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return REG_READ(REG_GLOBAL2, 0x19);
|
||||
}
|
||||
|
||||
static int __mv88e6352_phy_write(struct dsa_switch *ds, int addr, int regnum,
|
||||
u16 val)
|
||||
{
|
||||
REG_WRITE(REG_GLOBAL2, 0x19, val);
|
||||
REG_WRITE(REG_GLOBAL2, 0x18, 0x9400 | (addr << 5) | regnum);
|
||||
|
||||
return mv88e6352_phy_wait(ds);
|
||||
}
|
||||
|
||||
static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
|
||||
{
|
||||
struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
|
||||
int ret;
|
||||
|
||||
if (bus == NULL)
|
||||
return NULL;
|
||||
|
||||
ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
|
||||
if (ret >= 0) {
|
||||
if (ret == 0x3521)
|
||||
return "Marvell 88E6352 (A0)";
|
||||
if (ret == 0x3522)
|
||||
return "Marvell 88E6352 (A1)";
|
||||
if ((ret & 0xfff0) == 0x3520)
|
||||
return "Marvell 88E6352";
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static int mv88e6352_switch_reset(struct dsa_switch *ds)
|
||||
{
|
||||
unsigned long timeout;
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
/* Set all ports to the disabled state. */
|
||||
for (i = 0; i < 7; i++) {
|
||||
ret = REG_READ(REG_PORT(i), 0x04);
|
||||
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
|
||||
}
|
||||
|
||||
/* Wait for transmit queues to drain. */
|
||||
usleep_range(2000, 4000);
|
||||
|
||||
/* Reset the switch. Keep PPU active (bit 14, undocumented).
|
||||
* The PPU needs to be active to support indirect phy register
|
||||
* accesses through global registers 0x18 and 0x19.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
|
||||
|
||||
/* Wait up to one second for reset to complete. */
|
||||
timeout = jiffies + 1 * HZ;
|
||||
while (time_before(jiffies, timeout)) {
|
||||
ret = REG_READ(REG_GLOBAL, 0x00);
|
||||
if ((ret & 0x8800) == 0x8800)
|
||||
break;
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
if (time_after(jiffies, timeout))
|
||||
return -ETIMEDOUT;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6352_setup_global(struct dsa_switch *ds)
|
||||
{
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
/* Discard packets with excessive collisions,
|
||||
* mask all interrupt sources, enable PPU (bit 14, undocumented).
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
|
||||
|
||||
/* Set the default address aging time to 5 minutes, and
|
||||
* enable address learn messages to be sent to all message
|
||||
* ports.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
|
||||
|
||||
/* Configure the priority mapping registers. */
|
||||
ret = mv88e6xxx_config_prio(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Configure the upstream port, and configure the upstream
|
||||
* port as the port to which ingress and egress monitor frames
|
||||
* are to be sent.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
|
||||
|
||||
/* Disable remote management for now, and set the switch's
|
||||
* DSA device number.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
|
||||
|
||||
/* Send all frames with destination addresses matching
|
||||
* 01:80:c2:00:00:2x to the CPU port.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
|
||||
|
||||
/* Send all frames with destination addresses matching
|
||||
* 01:80:c2:00:00:0x to the CPU port.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
|
||||
|
||||
/* Disable the loopback filter, disable flow control
|
||||
* messages, disable flood broadcast override, disable
|
||||
* removing of provider tags, disable ATU age violation
|
||||
* interrupts, disable tag flow control, force flow
|
||||
* control priority to the highest, and send all special
|
||||
* multicast frames to the CPU at the highest priority.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
|
||||
|
||||
/* Program the DSA routing table. */
|
||||
for (i = 0; i < 32; i++) {
|
||||
int nexthop = 0x1f;
|
||||
|
||||
if (i != ds->index && i < ds->dst->pd->nr_chips)
|
||||
nexthop = ds->pd->rtable[i] & 0x1f;
|
||||
|
||||
REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
|
||||
}
|
||||
|
||||
/* Clear all trunk masks. */
|
||||
for (i = 0; i < 8; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
|
||||
|
||||
/* Clear all trunk mappings. */
|
||||
for (i = 0; i < 16; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
|
||||
|
||||
/* Disable ingress rate limiting by resetting all ingress
|
||||
* rate limit registers to their initial state.
|
||||
*/
|
||||
for (i = 0; i < 7; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
|
||||
|
||||
/* Initialise cross-chip port VLAN table to reset defaults. */
|
||||
REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
|
||||
|
||||
/* Clear the priority override table. */
|
||||
for (i = 0; i < 16; i++)
|
||||
REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
|
||||
|
||||
/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
|
||||
{
|
||||
int addr = REG_PORT(p);
|
||||
u16 val;
|
||||
|
||||
/* MAC Forcing register: don't force link, speed, duplex
|
||||
* or flow control state to any particular values on physical
|
||||
* ports, but force the CPU port and all DSA ports to 1000 Mb/s
|
||||
* full duplex.
|
||||
*/
|
||||
if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
|
||||
REG_WRITE(addr, 0x01, 0x003e);
|
||||
else
|
||||
REG_WRITE(addr, 0x01, 0x0003);
|
||||
|
||||
/* Do not limit the period of time that this port can be
|
||||
* paused for by the remote end or the period of time that
|
||||
* this port can pause the remote end.
|
||||
*/
|
||||
REG_WRITE(addr, 0x02, 0x0000);
|
||||
|
||||
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
|
||||
* disable Header mode, enable IGMP/MLD snooping, disable VLAN
|
||||
* tunneling, determine priority by looking at 802.1p and IP
|
||||
* priority fields (IP prio has precedence), and set STP state
|
||||
* to Forwarding.
|
||||
*
|
||||
* If this is the CPU link, use DSA or EDSA tagging depending
|
||||
* on which tagging mode was configured.
|
||||
*
|
||||
* If this is a link to another switch, use DSA tagging mode.
|
||||
*
|
||||
* If this is the upstream port for this switch, enable
|
||||
* forwarding of unknown unicasts and multicasts.
|
||||
*/
|
||||
val = 0x0433;
|
||||
if (dsa_is_cpu_port(ds, p)) {
|
||||
if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
|
||||
val |= 0x3300;
|
||||
else
|
||||
val |= 0x0100;
|
||||
}
|
||||
if (ds->dsa_port_mask & (1 << p))
|
||||
val |= 0x0100;
|
||||
if (p == dsa_upstream_port(ds))
|
||||
val |= 0x000c;
|
||||
REG_WRITE(addr, 0x04, val);
|
||||
|
||||
/* Port Control 1: disable trunking. Also, if this is the
|
||||
* CPU port, enable learn messages to be sent to this port.
|
||||
*/
|
||||
REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
|
||||
|
||||
/* Port based VLAN map: give each port its own address
|
||||
* database, allow the CPU port to talk to each of the 'real'
|
||||
* ports, and allow each of the 'real' ports to only talk to
|
||||
* the upstream port.
|
||||
*/
|
||||
val = (p & 0xf) << 12;
|
||||
if (dsa_is_cpu_port(ds, p))
|
||||
val |= ds->phys_port_mask;
|
||||
else
|
||||
val |= 1 << dsa_upstream_port(ds);
|
||||
REG_WRITE(addr, 0x06, val);
|
||||
|
||||
/* Default VLAN ID and priority: don't set a default VLAN
|
||||
* ID, and set the default packet priority to zero.
|
||||
*/
|
||||
REG_WRITE(addr, 0x07, 0x0000);
|
||||
|
||||
/* Port Control 2: don't force a good FCS, set the maximum
|
||||
* frame size to 10240 bytes, don't let the switch add or
|
||||
* strip 802.1q tags, don't discard tagged or untagged frames
|
||||
* on this port, do a destination address lookup on all
|
||||
* received packets as usual, disable ARP mirroring and don't
|
||||
* send a copy of all transmitted/received frames on this port
|
||||
* to the CPU.
|
||||
*/
|
||||
REG_WRITE(addr, 0x08, 0x2080);
|
||||
|
||||
/* Egress rate control: disable egress rate control. */
|
||||
REG_WRITE(addr, 0x09, 0x0001);
|
||||
|
||||
/* Egress rate control 2: disable egress rate control. */
|
||||
REG_WRITE(addr, 0x0a, 0x0000);
|
||||
|
||||
/* Port Association Vector: when learning source addresses
|
||||
* of packets, add the address to the address database using
|
||||
* a port bitmap that has only the bit for this port set and
|
||||
* the other bits clear.
|
||||
*/
|
||||
REG_WRITE(addr, 0x0b, 1 << p);
|
||||
|
||||
/* Port ATU control: disable limiting the number of address
|
||||
* database entries that this port is allowed to use.
|
||||
*/
|
||||
REG_WRITE(addr, 0x0c, 0x0000);
|
||||
|
||||
/* Priority Override: disable DA, SA and VTU priority override. */
|
||||
REG_WRITE(addr, 0x0d, 0x0000);
|
||||
|
||||
/* Port Ethertype: use the Ethertype DSA Ethertype value. */
|
||||
REG_WRITE(addr, 0x0f, ETH_P_EDSA);
|
||||
|
||||
/* Tag Remap: use an identity 802.1p prio -> switch prio
|
||||
* mapping.
|
||||
*/
|
||||
REG_WRITE(addr, 0x18, 0x3210);
|
||||
|
||||
/* Tag Remap 2: use an identity 802.1p prio -> switch prio
|
||||
* mapping.
|
||||
*/
|
||||
REG_WRITE(addr, 0x19, 0x7654);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6352_setup(struct dsa_switch *ds)
|
||||
{
|
||||
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
mutex_init(&ps->smi_mutex);
|
||||
mutex_init(&ps->stats_mutex);
|
||||
mutex_init(&ps->phy_mutex);
|
||||
|
||||
ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
|
||||
|
||||
ret = mv88e6352_switch_reset(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* @@@ initialise vtu and atu */
|
||||
|
||||
ret = mv88e6352_setup_global(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < 7; i++) {
|
||||
ret = mv88e6352_setup_port(ds, i);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6352_port_to_phy_addr(int port)
|
||||
{
|
||||
if (port >= 0 && port <= 4)
|
||||
return port;
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int
|
||||
mv88e6352_phy_read(struct dsa_switch *ds, int port, int regnum)
|
||||
{
|
||||
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
|
||||
int addr = mv88e6352_port_to_phy_addr(port);
|
||||
int ret;
|
||||
|
||||
if (addr < 0)
|
||||
return addr;
|
||||
|
||||
mutex_lock(&ps->phy_mutex);
|
||||
ret = __mv88e6352_phy_read(ds, addr, regnum);
|
||||
mutex_unlock(&ps->phy_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int
|
||||
mv88e6352_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
|
||||
{
|
||||
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
|
||||
int addr = mv88e6352_port_to_phy_addr(port);
|
||||
int ret;
|
||||
|
||||
if (addr < 0)
|
||||
return addr;
|
||||
|
||||
mutex_lock(&ps->phy_mutex);
|
||||
ret = __mv88e6352_phy_write(ds, addr, regnum, val);
|
||||
mutex_unlock(&ps->phy_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct mv88e6xxx_hw_stat mv88e6352_hw_stats[] = {
|
||||
{ "in_good_octets", 8, 0x00, },
|
||||
{ "in_bad_octets", 4, 0x02, },
|
||||
{ "in_unicast", 4, 0x04, },
|
||||
{ "in_broadcasts", 4, 0x06, },
|
||||
{ "in_multicasts", 4, 0x07, },
|
||||
{ "in_pause", 4, 0x16, },
|
||||
{ "in_undersize", 4, 0x18, },
|
||||
{ "in_fragments", 4, 0x19, },
|
||||
{ "in_oversize", 4, 0x1a, },
|
||||
{ "in_jabber", 4, 0x1b, },
|
||||
{ "in_rx_error", 4, 0x1c, },
|
||||
{ "in_fcs_error", 4, 0x1d, },
|
||||
{ "out_octets", 8, 0x0e, },
|
||||
{ "out_unicast", 4, 0x10, },
|
||||
{ "out_broadcasts", 4, 0x13, },
|
||||
{ "out_multicasts", 4, 0x12, },
|
||||
{ "out_pause", 4, 0x15, },
|
||||
{ "excessive", 4, 0x11, },
|
||||
{ "collisions", 4, 0x1e, },
|
||||
{ "deferred", 4, 0x05, },
|
||||
{ "single", 4, 0x14, },
|
||||
{ "multiple", 4, 0x17, },
|
||||
{ "out_fcs_error", 4, 0x03, },
|
||||
{ "late", 4, 0x1f, },
|
||||
{ "hist_64bytes", 4, 0x08, },
|
||||
{ "hist_65_127bytes", 4, 0x09, },
|
||||
{ "hist_128_255bytes", 4, 0x0a, },
|
||||
{ "hist_256_511bytes", 4, 0x0b, },
|
||||
{ "hist_512_1023bytes", 4, 0x0c, },
|
||||
{ "hist_1024_max_bytes", 4, 0x0d, },
|
||||
};
|
||||
|
||||
static void
|
||||
mv88e6352_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
|
||||
{
|
||||
mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6352_hw_stats),
|
||||
mv88e6352_hw_stats, port, data);
|
||||
}
|
||||
|
||||
static void
|
||||
mv88e6352_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
|
||||
{
|
||||
mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6352_hw_stats),
|
||||
mv88e6352_hw_stats, port, data);
|
||||
}
|
||||
|
||||
static int mv88e6352_get_sset_count(struct dsa_switch *ds)
|
||||
{
|
||||
return ARRAY_SIZE(mv88e6352_hw_stats);
|
||||
}
|
||||
|
||||
struct dsa_switch_driver mv88e6352_switch_driver = {
|
||||
.tag_protocol = DSA_TAG_PROTO_EDSA,
|
||||
.priv_size = sizeof(struct mv88e6xxx_priv_state),
|
||||
.probe = mv88e6352_probe,
|
||||
.setup = mv88e6352_setup,
|
||||
.set_addr = mv88e6xxx_set_addr_indirect,
|
||||
.phy_read = mv88e6352_phy_read,
|
||||
.phy_write = mv88e6352_phy_write,
|
||||
.poll_link = mv88e6xxx_poll_link,
|
||||
.get_strings = mv88e6352_get_strings,
|
||||
.get_ethtool_stats = mv88e6352_get_ethtool_stats,
|
||||
.get_sset_count = mv88e6352_get_sset_count,
|
||||
};
|
||||
|
||||
MODULE_ALIAS("platform:mv88e6352");
|
||||
@ -507,6 +507,9 @@ static int __init mv88e6xxx_init(void)
|
||||
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
|
||||
register_switch_driver(&mv88e6123_61_65_switch_driver);
|
||||
#endif
|
||||
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
|
||||
register_switch_driver(&mv88e6352_switch_driver);
|
||||
#endif
|
||||
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
|
||||
register_switch_driver(&mv88e6171_switch_driver);
|
||||
#endif
|
||||
|
||||
@ -37,6 +37,12 @@ struct mv88e6xxx_priv_state {
|
||||
*/
|
||||
struct mutex stats_mutex;
|
||||
|
||||
/* This mutex serializes phy access for chips with
|
||||
* indirect phy addressing. It is unused for chips
|
||||
* with direct phy access.
|
||||
*/
|
||||
struct mutex phy_mutex;
|
||||
|
||||
int id; /* switch product id */
|
||||
};
|
||||
|
||||
@ -70,6 +76,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
|
||||
|
||||
extern struct dsa_switch_driver mv88e6131_switch_driver;
|
||||
extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
|
||||
extern struct dsa_switch_driver mv88e6352_switch_driver;
|
||||
extern struct dsa_switch_driver mv88e6171_switch_driver;
|
||||
|
||||
#define REG_READ(addr, reg) \
|
||||
|
||||
Loading…
Reference in New Issue
Block a user