This pull request contains Broadcom ARM-based SoC Device Tree changes

for 4.18, please pull the following:
 
 - Stefan provides updates to the BCM2835 RNG Device Tree binding and
   Device Tree node by adding its missing interrupt line.
 
 - Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new
   partitions syntax which allows specifying a partition parser
 
 - Rafal also updates a bunch of BCM5301X Device Tree source files to a
   more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up
   to this discussion with Greg:
   https://lkml.org/lkml/2018/4/28/179
 
 - Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094)
   and XWR-3150 V1 (similar to XWR-3100)
 
 - Stefan provides a set of updates to the BCM283x Device Tree sources to
   support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He
   adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455
   BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin
   assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the
   missing GPIOs for controlling additional peripherals now that support
   for the RPi 3 GPIO expander has landed
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJa9dQoAAoJEIfQlpxEBwcEmoIP/jlh7R8r+k1UI3JGBdskUuif
 KG5LnFpw509zPJhtb70KgUWJ8QmzT2F0m1QtAvpsINmgZe3lZW+mnkcSP1k8rg6n
 rJMz2hLb1ytVUxcoTvieUljh7F13qvME/RBp86BleVqjiAdMFw+nJb2Qgq++G8hV
 Of7gqNH1+c8OvYfdx4kr91mbnvt9EHwuYuFAgPpcQNKGMWbfL+jpVg8aQBmIpKPi
 R06YGmTzevdkCzuB5Uf/1yYYkQf00/CNP6bpI+0mq0zYH7nPj0UP5WS2NFIl47M3
 rLnQi7ayvdg0YUR8wAG+PoyPW7QIBL3znTSOQAfjKFcN9FSnp7nPOXcjNt5ZfJBY
 GNvVfy6PjRfqgrrfCfnAnJJ0bUPPB56NNv2gQWBSwjbXsvb7GgZaxBkWZfJKnsi7
 W0T4zp0xQcM8S4/salUoUeFU+sZcETmU69e4Oa+/nurCcjxgFrxFlusPA7jBFouL
 GLAH6xPEvY8Q8st8MYQYNSiJaigvIntb5eOGqdrpXHlsgKqXCJ7viwMYAH3+2csH
 46I7fZxh+56ug1YIx51ZlQwJB77sa6vTHT2KZ4eycaZPglksnHhFB52Vdzxma7Bm
 2mbkc/wbZQ4jvVQcxoLgjoGbzBJCQkIMBp84CatpM0t/yXQ2/E7yvtuQO+7f0W2/
 G9V8oj1UVHG+ja4iu+RB
 =R36h
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux into next/dt

This pull request contains Broadcom ARM-based SoC Device Tree changes
for 4.18, please pull the following:

- Stefan provides updates to the BCM2835 RNG Device Tree binding and
  Device Tree node by adding its missing interrupt line.

- Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new
  partitions syntax which allows specifying a partition parser

- Rafal also updates a bunch of BCM5301X Device Tree source files to a
  more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up
  to this discussion with Greg:
  https://lkml.org/lkml/2018/4/28/179

- Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094)
  and XWR-3150 V1 (similar to XWR-3100)

- Stefan provides a set of updates to the BCM283x Device Tree sources to
  support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He
  adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455
  BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin
  assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the
  missing GPIOs for controlling additional peripherals now that support
  for the RPi 3 GPIO expander has landed

* tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax
  ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
  ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
  ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ / MIT
  arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+
  ARM: dts: bcm2837: Add Raspberry Pi 3 B+
  dt-bindings: bcm: Add Raspberry Pi 3 B+
  ARM: dts: bcm2837: Add missing GPIOs of Expander
  ARM: dts: bcm283x: Fix PWM pin assignment
  ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax
  ARM: bcm283x: Add missing interrupt for RNG block
  dt-binding: rng: Add interrupt property for BCM2835

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -34,6 +34,10 @@ Raspberry Pi 3 Model B
 Required root node properties:
 compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
 
+Raspberry Pi 3 Model B+
+Required root node properties:
+compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+
 Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";

Documentation/devicetree/bindings/rng/brcm,bcm2835.txt

@@ -14,11 +14,16 @@ Optional properties:
 - clocks : phandle to clock-controller plus clock-specifier pair
 - clock-names : "ipsec" as a clock name
 
+Optional properties:
+
+- interrupts: specify the interrupt for the RNG block
+
 Example:
 
 rng {
-        compatible = "brcm,bcm2835-rng";
-        reg = <0x7e104000 0x10>;
+	compatible = "brcm,bcm2835-rng";
+	reg = <0x7e104000 0x10>;
+	interrupts = <2 29>;
 };
 
 rng@18033000 {

arch/arm/boot/dts/Makefile

@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
 	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -102,8 +103,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-dlink-dir-885l.dtb \
 	bcm47094-linksys-panamera.dtb \
 	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
 	bcm47094-luxul-xbr-4500.dtb \
 	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \

arch/arm/boot/dts/bcm2835-rpi-a-plus.dts

@@ -101,6 +101,12 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-a.dts

@@ -96,6 +96,12 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-b-plus.dts

@@ -103,6 +103,12 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts

@@ -96,6 +96,12 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -91,6 +91,12 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -83,12 +83,6 @@
 	bus-width = <4>;
 };
 
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
 &usb {
 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
 };

arch/arm/boot/dts/bcm2836-rpi-2-b.dts

@@ -41,6 +41,12 @@
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -20,9 +20,14 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &firmware {
@@ -42,6 +47,16 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
@@ -51,6 +66,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -63,11 +79,19 @@
 
 /* SDHCI is used to control the SDIO for wireless */
 &sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio34>;
 	status = "okay";
 	bus-width = <4>;
 	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
 
 /* SDHOST is used to drive the SD card */

arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi

@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/bcm283x.dtsi

@@ -136,6 +136,7 @@
 		rng@7e104000 {
 			compatible = "brcm,bcm2835-rng";
 			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
 		};
 
 		mailbox: mailbox@7e00b880 {

arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-AC56U
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-AC68U
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-1750DHP
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Luxul XWC-1000
  *
  * Copyright 2014 Luxul Inc.
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -26,9 +25,15 @@
 
 	nand: nand@18028000 {
 		nandcs@0 {
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "ubi";
+					reg = <0x00000000 0x08000000>;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Netgear R6300 V2
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X arm platform code.
  * DTS for SmartRG SR400ac
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-N18U
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-600DHP2
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-900DHP
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-AC87U
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WXR-1900DHP
  *
  * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4709-linksys-ea9200.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4709-netgear-r7000.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Netgear R7000
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for D-Link DIR-885L
  *
  * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
@@ -37,9 +26,15 @@
 
 	nand: nand@18028000 {
 		nandcs@0 {
-			partition@0 {
-				label = "firmware";
-				reg = <0x00000000 0x08000000>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts

@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts

@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power	{
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb3	{
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};

arch/arm/boot/dts/bcm47094-netgear-r8500.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;

arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom Northstar NAND.
  *
  * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
- *
- * Licensed under the ISC license.
  */
 
 #include "bcm5301x-nand-cs0.dtsi"

arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 #include "bcm5301x-nand-cs0.dtsi"

arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X Nand chip defaults.
  *
@@ -5,8 +6,6 @@
  * and uses 8 bit ECC.
  *
  * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include "bcm5301x-nand-cs0.dtsi"

arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom Northstar NAND.
  *
  * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 / {

arch/arm64/boot/dts/broadcom/Makefile

@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
+			      bcm2837-rpi-3-b-plus.dtb
 
 subdir-y	+= northstar2
 subdir-y	+= stingray

arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts

@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-3-b-plus.dts"