ARM: shmobile: armadillo800eva: enable camera

This patch enable camera support on CON1

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This commit is contained in:
Kuninori Morimoto 2012-06-12 02:40:07 -07:00 committed by Rafael J. Wysocki
parent 910c14d0b8
commit 3760e79450
2 changed files with 120 additions and 1 deletions

View File

@ -86,6 +86,16 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
# CONFIG_RC_CORE is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9T112=y
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_HDMI=y

View File

@ -37,13 +37,16 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7740.h>
#include <media/mt9t112.h>
#include <media/sh_mobile_ceu.h>
#include <media/soc_camera.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/r8a7740.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mobile_hdmi.h>
@ -630,6 +633,87 @@ static struct platform_device sh_mmcif_device = {
.resource = sh_mmcif_resources,
};
/* Camera */
static int mt9t111_power(struct device *dev, int mode)
{
struct clk *mclk = clk_get(NULL, "video1");
if (IS_ERR(mclk)) {
dev_err(dev, "can't get video1 clock\n");
return -EINVAL;
}
if (mode) {
/* video1 (= CON1 camera) expect 24MHz */
clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
clk_enable(mclk);
gpio_direction_output(GPIO_PORT158, 1);
} else {
gpio_direction_output(GPIO_PORT158, 0);
clk_disable(mclk);
}
clk_put(mclk);
return 0;
}
static struct i2c_board_info i2c_camera_mt9t111 = {
I2C_BOARD_INFO("mt9t112", 0x3d),
};
static struct mt9t112_camera_info mt9t111_info = {
.divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 },
};
static struct soc_camera_link mt9t111_link = {
.i2c_adapter_id = 0,
.bus_id = 0,
.board_info = &i2c_camera_mt9t111,
.power = mt9t111_power,
.priv = &mt9t111_info,
};
static struct platform_device camera_device = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &mt9t111_link,
},
};
/* CEU0 */
static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
.flags = SH_CEU_FLAG_LOWER_8BIT,
};
static struct resource ceu0_resources[] = {
[0] = {
.name = "CEU",
.start = 0xfe910000,
.end = 0xfe91009f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x0500),
.flags = IORESOURCE_IRQ,
},
[2] = {
/* place holder for contiguous memory */
},
};
static struct platform_device ceu0_device = {
.name = "sh_mobile_ceu",
.id = 0,
.num_resources = ARRAY_SIZE(ceu0_resources),
.resource = ceu0_resources,
.dev = {
.platform_data = &sh_mobile_ceu0_info,
.coherent_dma_mask = 0xffffffff,
},
};
/* I2C */
static struct i2c_board_info i2c0_devices[] = {
{
@ -649,6 +733,8 @@ static struct platform_device *eva_devices[] __initdata = {
&sh_mmcif_device,
&hdmi_device,
&hdmi_lcdc_device,
&camera_device,
&ceu0_device,
};
static void __init eva_clock_init(void)
@ -807,6 +893,29 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL);
gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL);
/* CEU0 */
gpio_request(GPIO_FN_VIO0_D7, NULL);
gpio_request(GPIO_FN_VIO0_D6, NULL);
gpio_request(GPIO_FN_VIO0_D5, NULL);
gpio_request(GPIO_FN_VIO0_D4, NULL);
gpio_request(GPIO_FN_VIO0_D3, NULL);
gpio_request(GPIO_FN_VIO0_D2, NULL);
gpio_request(GPIO_FN_VIO0_D1, NULL);
gpio_request(GPIO_FN_VIO0_D0, NULL);
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
gpio_request(GPIO_FN_VIO0_VD, NULL);
gpio_request(GPIO_FN_VIO0_FIELD, NULL);
gpio_request(GPIO_FN_VIO_CKO, NULL);
/* CON1/CON15 Camera */
gpio_request(GPIO_PORT173, NULL); /* STANDBY */
gpio_request(GPIO_PORT172, NULL); /* RST */
gpio_request(GPIO_PORT158, NULL); /* CAM_PON */
gpio_direction_output(GPIO_PORT173, 0);
gpio_direction_output(GPIO_PORT172, 1);
gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */
/*
* CAUTION
*