From 347c8d83cd9f546a8357e1ab12fa6867707975d8 Mon Sep 17 00:00:00 2001 From: "Dasgupta, Romit" Date: Thu, 6 Nov 2008 15:46:18 +0530 Subject: [PATCH] [netdrvr] smc911x: fix for driver resume (and compilation warning) I am trying out suspend, resume on an OMAP3 based board. What I see during resume is that the SMC911x driver resume routing gets stuck after trying to transmit the packet out of the controller. Some debug messages below: --> smc911x_drv_resume eth0: --> smc911x_reset eth0: smc911x_reset timeout waiting for PM restore eth0: --> smc911x_enable eth0: --> smc911x_phy_configure() eth0: --> smc911x_phy_reset() eth0: phy caps=0x782d eth0: phy advertised caps=0x0de1 eth0: --> smc911x_phy_check_media smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 eth0: link down Restarting tasks ... eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt nfs: server 172.24.190.217 not responding, still trying nfs: server 172.24.190.217 not responding, still trying The following change makes it work fine: (The change within smc911x_drv_probe function was to get rid of a compilation warning). Signed-off-by: Romit Dasgupta Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05b..1f26ab0e7986 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } }