liquidio: CN23XX register setup

Adds support for initializing cn23xx device registers
related to mac, input/output and pf global config.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Raghu Vatsavayi 2016-08-31 11:03:26 -07:00 committed by David S. Miller
parent 72c0091293
commit 3451b97cce
4 changed files with 316 additions and 8 deletions

View File

@ -214,6 +214,36 @@ void cn23xx_dump_pf_initialized_regs(struct octeon_device *oct)
CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_PKT_CNT_INT)));
}
static void cn23xx_enable_error_reporting(struct octeon_device *oct)
{
u32 regval;
u32 uncorrectable_err_mask, corrtable_err_status;
pci_read_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, &regval);
if (regval & CN23XX_CONFIG_PCIE_DEVCTL_MASK) {
uncorrectable_err_mask = 0;
corrtable_err_status = 0;
pci_read_config_dword(oct->pci_dev,
CN23XX_CONFIG_PCIE_UNCORRECT_ERR_MASK,
&uncorrectable_err_mask);
pci_read_config_dword(oct->pci_dev,
CN23XX_CONFIG_PCIE_CORRECT_ERR_STATUS,
&corrtable_err_status);
dev_err(&oct->pci_dev->dev, "PCI-E Fatal error detected;\n"
"\tdev_ctl_status_reg = 0x%08x\n"
"\tuncorrectable_error_mask_reg = 0x%08x\n"
"\tcorrectable_error_status_reg = 0x%08x\n",
regval, uncorrectable_err_mask,
corrtable_err_status);
}
regval |= 0xf; /* Enable Link error reporting */
dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: Enabling PCI-E error reporting..\n",
oct->octeon_id);
pci_write_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, regval);
}
static u32 cn23xx_coprocessor_clock(struct octeon_device *oct)
{
/* Bits 29:24 of RST_BOOT[PNR_MUL] holds the ref.clock MULTIPLIER
@ -224,6 +254,234 @@ static u32 cn23xx_coprocessor_clock(struct octeon_device *oct)
return (((lio_pci_readq(oct, CN23XX_RST_BOOT) >> 24) & 0x3f) * 50);
}
u32 cn23xx_pf_get_oq_ticks(struct octeon_device *oct, u32 time_intr_in_us)
{
/* This gives the SLI clock per microsec */
u32 oqticks_per_us = cn23xx_coprocessor_clock(oct);
oct->pfvf_hsword.coproc_tics_per_us = oqticks_per_us;
/* This gives the clock cycles per millisecond */
oqticks_per_us *= 1000;
/* This gives the oq ticks (1024 core clock cycles) per millisecond */
oqticks_per_us /= 1024;
/* time_intr is in microseconds. The next 2 steps gives the oq ticks
* corressponding to time_intr.
*/
oqticks_per_us *= time_intr_in_us;
oqticks_per_us /= 1000;
return oqticks_per_us;
}
static void cn23xx_setup_global_mac_regs(struct octeon_device *oct)
{
u64 reg_val;
u16 mac_no = oct->pcie_port;
u16 pf_num = oct->pf_num;
/* programming SRN and TRS for each MAC(0..3) */
dev_dbg(&oct->pci_dev->dev, "%s:Using pcie port %d\n",
__func__, mac_no);
/* By default, mapping all 64 IOQs to a single MACs */
reg_val =
octeon_read_csr64(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num));
if (oct->rev_id == OCTEON_CN23XX_REV_1_1) {
/* setting SRN <6:0> */
reg_val = pf_num * CN23XX_MAX_RINGS_PER_PF_PASS_1_1;
} else {
/* setting SRN <6:0> */
reg_val = pf_num * CN23XX_MAX_RINGS_PER_PF;
}
/* setting TRS <23:16> */
reg_val = reg_val |
(oct->sriov_info.trs << CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS);
/* write these settings to MAC register */
octeon_write_csr64(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num),
reg_val);
dev_dbg(&oct->pci_dev->dev, "SLI_PKT_MAC(%d)_PF(%d)_RINFO : 0x%016llx\n",
mac_no, pf_num, (u64)octeon_read_csr64
(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num)));
}
static int cn23xx_pf_setup_global_input_regs(struct octeon_device *oct)
{
u32 q_no, ern, srn;
u64 pf_num;
u64 intr_threshold, reg_val;
struct octeon_instr_queue *iq;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
pf_num = oct->pf_num;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->sriov_info.num_pf_rings;
/** Set the MAC_NUM and PVF_NUM in IQ_PKT_CONTROL reg
* for all queues.Only PF can set these bits.
* bits 29:30 indicate the MAC num.
* bits 32:47 indicate the PVF num.
*/
for (q_no = 0; q_no < ern; q_no++) {
reg_val = oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS;
reg_val |= pf_num << CN23XX_PKT_INPUT_CTL_PF_NUM_POS;
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
reg_val);
}
/* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for
* pf queues
*/
for (q_no = srn; q_no < ern; q_no++) {
void __iomem *inst_cnt_reg;
iq = oct->instr_queue[q_no];
if (iq)
inst_cnt_reg = iq->inst_cnt_reg;
else
inst_cnt_reg = (u8 *)oct->mmio[0].hw_addr +
CN23XX_SLI_IQ_INSTR_COUNT64(q_no);
reg_val =
octeon_read_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no));
reg_val |= CN23XX_PKT_INPUT_CTL_MASK;
octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no),
reg_val);
/* Set WMARK level for triggering PI_INT */
/* intr_threshold = CN23XX_DEF_IQ_INTR_THRESHOLD & */
intr_threshold = CFG_GET_IQ_INTR_PKT(cn23xx->conf) &
CN23XX_PKT_IN_DONE_WMARK_MASK;
writeq((readq(inst_cnt_reg) &
~(CN23XX_PKT_IN_DONE_WMARK_MASK <<
CN23XX_PKT_IN_DONE_WMARK_BIT_POS)) |
(intr_threshold << CN23XX_PKT_IN_DONE_WMARK_BIT_POS),
inst_cnt_reg);
}
return 0;
}
static void cn23xx_pf_setup_global_output_regs(struct octeon_device *oct)
{
u32 reg_val;
u32 q_no, ern, srn;
u64 time_threshold;
struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip;
srn = oct->sriov_info.pf_srn;
ern = srn + oct->sriov_info.num_pf_rings;
if (CFG_GET_IS_SLI_BP_ON(cn23xx->conf)) {
octeon_write_csr64(oct, CN23XX_SLI_OQ_WMARK, 32);
} else {
/** Set Output queue watermark to 0 to disable backpressure */
octeon_write_csr64(oct, CN23XX_SLI_OQ_WMARK, 0);
}
for (q_no = srn; q_no < ern; q_no++) {
reg_val = octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no));
/* set IPTR & DPTR */
reg_val |=
(CN23XX_PKT_OUTPUT_CTL_IPTR | CN23XX_PKT_OUTPUT_CTL_DPTR);
/* reset BMODE */
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_BMODE);
/* No Relaxed Ordering, No Snoop, 64-bit Byte swap
* for Output Queue ScatterList
* reset ROR_P, NSR_P
*/
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ROR_P);
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_NSR_P);
#ifdef __LITTLE_ENDIAN_BITFIELD
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ES_P);
#else
reg_val |= (CN23XX_PKT_OUTPUT_CTL_ES_P);
#endif
/* No Relaxed Ordering, No Snoop, 64-bit Byte swap
* for Output Queue Data
* reset ROR, NSR
*/
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ROR);
reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_NSR);
/* set the ES bit */
reg_val |= (CN23XX_PKT_OUTPUT_CTL_ES);
/* write all the selected settings */
octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no), reg_val);
/* Enabling these interrupt in oct->fn_list.enable_interrupt()
* routine which called after IOQ init.
* Set up interrupt packet and time thresholds
* for all the OQs
*/
time_threshold = cn23xx_pf_get_oq_ticks(
oct, (u32)CFG_GET_OQ_INTR_TIME(cn23xx->conf));
octeon_write_csr64(oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(q_no),
(CFG_GET_OQ_INTR_PKT(cn23xx->conf) |
(time_threshold << 32)));
}
/** Setting the water mark level for pko back pressure **/
writeq(0x40, (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_WMARK);
/** Disabling setting OQs in reset when ring has no dorebells
* enabling this will cause of head of line blocking
*/
/* Do it only for pass1.1. and pass1.2 */
if ((oct->rev_id == OCTEON_CN23XX_REV_1_0) ||
(oct->rev_id == OCTEON_CN23XX_REV_1_1))
writeq(readq((u8 *)oct->mmio[0].hw_addr +
CN23XX_SLI_GBL_CONTROL) | 0x2,
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_GBL_CONTROL);
/** Enable channel-level backpressure */
if (oct->pf_num)
writeq(0xffffffffffffffffULL,
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OUT_BP_EN2_W1S);
else
writeq(0xffffffffffffffffULL,
(u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OUT_BP_EN_W1S);
}
static int cn23xx_setup_pf_device_regs(struct octeon_device *oct)
{
cn23xx_enable_error_reporting(oct);
/* program the MAC(0..3)_RINFO before setting up input/output regs */
cn23xx_setup_global_mac_regs(oct);
if (cn23xx_pf_setup_global_input_regs(oct))
return -1;
cn23xx_pf_setup_global_output_regs(oct);
/* Default error timeout value should be 0x200000 to avoid host hang
* when reads invalid register
*/
octeon_write_csr64(oct, CN23XX_SLI_WINDOW_CTL,
CN23XX_SLI_WINDOW_CTL_DEFAULT);
/* set SLI_PKT_IN_JABBER to handle large VXLAN packets */
octeon_write_csr64(oct, CN23XX_SLI_PKT_IN_JABBER, CN23XX_INPUT_JABBER);
return 0;
}
static void cn23xx_setup_iq_regs(struct octeon_device *oct, u32 iq_no)
{
struct octeon_instr_queue *iq = oct->instr_queue[iq_no];
@ -433,6 +691,7 @@ int setup_cn23xx_octeon_pf_device(struct octeon_device *oct)
oct->fn_list.setup_iq_regs = cn23xx_setup_iq_regs;
oct->fn_list.setup_oq_regs = cn23xx_setup_oq_regs;
oct->fn_list.setup_device_regs = cn23xx_setup_pf_device_regs;
cn23xx_setup_reg_address(oct);

View File

@ -3695,6 +3695,22 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
octeon_set_io_queues_off(octeon_dev);
if (OCTEON_CN23XX_PF(octeon_dev)) {
ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: Failed to configure device registers\n");
return ret;
}
}
/* Initialize soft command buffer pool
*/
if (octeon_setup_sc_buffer_pool(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
/* Setup the data structures that manage this Octeon's Input queues. */
if (octeon_setup_instr_queues(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev,
@ -3706,14 +3722,6 @@ static int octeon_device_init(struct octeon_device *octeon_dev)
}
atomic_set(&octeon_dev->status, OCT_DEV_INSTR_QUEUE_INIT_DONE);
/* Initialize soft command buffer pool
*/
if (octeon_setup_sc_buffer_pool(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
/* Initialize lists to manage the requests of different types that
* arrive from user & kernel applications for this octeon device.
*/

View File

@ -120,6 +120,9 @@
#define CFG_GET_IQ_DB_MIN(cfg) ((cfg)->iq.db_min)
#define CFG_GET_IQ_DB_TIMEOUT(cfg) ((cfg)->iq.db_timeout)
#define CFG_GET_IQ_INTR_PKT(cfg) ((cfg)->iq.iq_intr_pkt)
#define CFG_SET_IQ_INTR_PKT(cfg, val) (cfg)->iq.iq_intr_pkt = val
#define CFG_GET_OQ_MAX_Q(cfg) ((cfg)->oq.max_oqs)
#define CFG_GET_OQ_INFO_PTR(cfg) ((cfg)->oq.info_ptr)
#define CFG_GET_OQ_PKTS_PER_INTR(cfg) ((cfg)->oq.pkts_per_intr)

View File

@ -276,6 +276,42 @@ struct octdev_props {
struct net_device *netdev;
};
struct octeon_pf_vf_hs_word {
#ifdef __LITTLE_ENDIAN_BITFIELD
/** PKIND value assigned for the DPI interface */
u64 pkind : 8;
/** OCTEON core clock multiplier */
u64 core_tics_per_us : 16;
/** OCTEON coprocessor clock multiplier */
u64 coproc_tics_per_us : 16;
/** app that currently running on OCTEON */
u64 app_mode : 8;
/** RESERVED */
u64 reserved : 16;
#else
/** RESERVED */
u64 reserved : 16;
/** app that currently running on OCTEON */
u64 app_mode : 8;
/** OCTEON coprocessor clock multiplier */
u64 coproc_tics_per_us : 16;
/** OCTEON core clock multiplier */
u64 core_tics_per_us : 16;
/** PKIND value assigned for the DPI interface */
u64 pkind : 8;
#endif
};
struct octeon_sriov_info {
/* Actual rings left for PF device */
u32 num_pf_rings;
@ -413,6 +449,8 @@ struct octeon_device {
struct octeon_sriov_info sriov_info;
struct octeon_pf_vf_hs_word pfvf_hsword;
int rx_pause;
int tx_pause;