leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

PM and build warning fixes for omaps

Browse Source 
While chasing system suspend related regressions, I noticed few other
 issues related to PM would be good to have fixed:
 
 - UART idling does not always work for hardware autoidle features
 - am335x resume works only the first time unless musb module is loaded
 
 Then there are three patches for omap1 related warnings caused by the gpio
 changes, and one build warning fix for legacy mmc platform code when mmc
 is built as a loadable module.
 
 These can all be merged whenever suitable naturally. I've sent the more
 urgent SATA regression fix separately although it appears in this pull
 request too because of the branches merged.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmC3IlsRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXOQww/+KyrCAWN2184qd4LinTVoBnh0Uuh74MIb
 c3y1oXUD6srbCn1ZQZh33dw6ek/lMAqRSZYtxS81/ByfsPxiwV1M5TKiLM/HHfGD
 qb9cxQ4pldWM85bN18QiDsWpN7VngtluqD61nSk5fFGWFJ7FB3Gkaq0pwFY69XR2
 pxi9jdiJzGZmfrth/1k10K/oosYZemtGMtbCJ7kaeXTHpi0n6cycK3HYdWpSNaG6
 ZJOYc0YQtHjgMImMZC2b7cpcg8N5bXVoC0znBoePnHAMHr3K3ucCz+7j+jOXeAjU
 ADMoUCm5l4Yp1ibPeC1b7zaLqOOMXwiRLoOypTqpUTfCR2yWsaxsw7rmt44me0y0
 XRjFfrMKRBzWnD2a3zPYK6OHzErV8A1rzJnFLqQ2cDW0GGZe6bI/mlwfTSqMu1Ih
 dFY4J66gkIdNtEfivKF0aOqwWUytoJEKI4KTnWdJuLFk/FYvv40FOrLGeiYb1jpT
 ijnkdmn7UEgqUrOwDdaIa90YIVf6SiENerrBCiDUuMD2tB+KYZxYxWuv7wTOcJGK
 Nz3KMwzD8nttIzPXKDWUuOQofZwkPb61rtyoEnlXAEsRxOBg9QRkU/wzZMDzoIok
 i2T2ubL1ifrby7KN46zdO+Nw58c37Z1y0TCz8IAiSIrKpjQP5TMySHpfvVh2odjc
 g0gRsRi3j5M=
 =/LY8
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

PM and build warning fixes for omaps

While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:

- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded

Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.

These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.

* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
  bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
  bus: ti-sysc: Fix am335x resume hang for usb otg module
  ARM: OMAP2+: Fix build warning when mmc_omap is not built
  ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
  ARM: OMAP1: Fix use of possibly uninitialized irq variable

Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2021-06-05 15:41:40 -07:00
commit 2f3e4eb179
6 changed files with 64 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
#ifdef CONFIG_LEDS_TRIGGERS
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
static int ams_delta_camera_power(struct device *dev, int power)
{
/*
* turn on camera LED
*/
if (power)
led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
else
led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
return 0;
}
#else
#define ams_delta_camera_power NULL
#endif
static struct platform_device ams_delta_audio_device = {

4
arch/arm/mach-omap1/board-h2.c
View File

@ -320,7 +320,7 @@ static int tps_setup(struct i2c_client *client, void *context)
{
if (!IS_BUILTIN(CONFIG_TPS65010))
return -ENOSYS;
tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
@ -394,6 +394,8 @@ static void __init h2_init(void)
BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
gpio_direction_input(H2_NAND_RB_GPIO_PIN);
gpiod_add_lookup_table(&isp1301_gpiod_table);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);

10
arch/arm/mach-omap1/pm.c
View File

@ -655,9 +655,13 @@ static int __init omap_pm_init(void)
irq = INT_7XX_WAKE_UP_REQ;
else if (cpu_is_omap16xx())
irq = INT_1610_WAKE_UP_REQ;
if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
NULL))
pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
else
irq = -1;
if (irq >= 0) {
if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
}
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)

2
arch/arm/mach-omap2/board-n8x0.c
View File

@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
static void n8x0_mmc_callback(void *data, u8 card_mask)
{
#ifdef CONFIG_MMC_OMAP
int bit, *openp, index;
if (board_is_n800()) {
@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
else
*openp = 0;
#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
#else
pr_warn("MMC: notify cover event not available\n");

57
drivers/bus/ti-sysc.c
View File

@ -1334,6 +1334,34 @@ err_allow_idle:
return error;
}
static int sysc_reinit_module(struct sysc *ddata, bool leave_enabled)
{
struct device *dev = ddata->dev;
int error;
/* Disable target module if it is enabled */
if (ddata->enabled) {
error = sysc_runtime_suspend(dev);
if (error)
dev_warn(dev, "reinit suspend failed: %i\n", error);
}
/* Enable target module */
error = sysc_runtime_resume(dev);
if (error)
dev_warn(dev, "reinit resume failed: %i\n", error);
if (leave_enabled)
return error;
/* Disable target module if no leave_enabled was set */
error = sysc_runtime_suspend(dev);
if (error)
dev_warn(dev, "reinit suspend failed: %i\n", error);
return error;
}
static int __maybe_unused sysc_noirq_suspend(struct device *dev)
{
struct sysc *ddata;
@ -1344,12 +1372,18 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev)
(SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
return 0;
return pm_runtime_force_suspend(dev);
if (!ddata->enabled)
return 0;
ddata->needs_resume = 1;
return sysc_runtime_suspend(dev);
}
static int __maybe_unused sysc_noirq_resume(struct device *dev)
{
struct sysc *ddata;
int error = 0;
ddata = dev_get_drvdata(dev);
@ -1357,7 +1391,19 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev)
(SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
return 0;
return pm_runtime_force_resume(dev);
if (ddata->cfg.quirks & SYSC_QUIRK_REINIT_ON_RESUME) {
error = sysc_reinit_module(ddata, ddata->needs_resume);
if (error)
dev_warn(dev, "noirq_resume failed: %i\n", error);
} else if (ddata->needs_resume) {
error = sysc_runtime_resume(dev);
if (error)
dev_warn(dev, "noirq_resume failed: %i\n", error);
}
ddata->needs_resume = 0;
return error;
}
static const struct dev_pm_ops sysc_pm_ops = {
@ -1408,9 +1454,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Uarts on omap4 and later */
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Quirks that need to be set based on the module address */
SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@ -1468,7 +1514,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050,
0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY |
SYSC_QUIRK_REINIT_ON_RESUME),
SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT),
/* PRUSS on am3, am4 and am5 */

1
include/linux/platform_data/ti-sysc.h
View File

@ -50,6 +50,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27)
#define SYSC_QUIRK_GPMC_DEBUG BIT(26)
#define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25)
#define SYSC_MODULE_QUIRK_PRUSS BIT(24)