forked from Minki/linux
mvebu dt for 4.4 (part 2)
- Add support for severals Armada-370-based Seagate NAS - Fix Ready NAS device tree - Modify SDHCI binding for A388-GP allowing using it on old and new version of the board -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlYhOjIACgkQCwYYjhRyO9VTWACeJDBHZ1+ojF5irnZzNe/9PKaF zJQAnjBmJxI1auTY+SQHVkZN3w2HOhwU =Dvfj -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu into next/dt mvebu dt for 4.4 (part 2) - Add support for severals Armada-370-based Seagate NAS - Fix Ready NAS device tree - Modify SDHCI binding for A388-GP allowing using it on old and new version of the board * tag 'mvebu-dt-4.4-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: set SW polling as SDHCI card detection on A388-GP arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 ARM: mvebu: add DT support for Seagate Personal Cloud ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
commit
2995f0a1b6
@ -723,6 +723,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
|
||||
armada-370-netgear-rn102.dtb \
|
||||
armada-370-netgear-rn104.dtb \
|
||||
armada-370-rd.dtb \
|
||||
armada-370-seagate-nas-2bay.dtb \
|
||||
armada-370-seagate-nas-4bay.dtb \
|
||||
armada-370-seagate-personal-cloud.dtb \
|
||||
armada-370-seagate-personal-cloud-2bay.dtb \
|
||||
armada-370-synology-ds213j.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_375) += \
|
||||
armada-375-db.dtb
|
||||
|
||||
@ -83,6 +83,12 @@
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
|
||||
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
|
||||
rtc@10300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -83,6 +83,12 @@
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
|
||||
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
|
||||
rtc@10300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
36
arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
Normal file
36
arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
Normal file
@ -0,0 +1,36 @@
|
||||
/*
|
||||
* Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Vincent Donnefort <vdonnefort@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here are some information allowing to identify the device:
|
||||
*
|
||||
* Product name : Seagate NAS 2-Bay
|
||||
* Code name (board/PCB) : Dart 2-Bay
|
||||
* Model name (case sticker) : SRPD20
|
||||
* Material desc (product spec) : STCTxxxxxxx
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-370-seagate-nas-xbay.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Seagate NAS 2-Bay (Dart, SRPD20)";
|
||||
compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
gpio-fan {
|
||||
gpio-fan,speed-map =
|
||||
< 0 3
|
||||
950 2
|
||||
1400 1
|
||||
1800 0>;
|
||||
};
|
||||
};
|
||||
133
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
Normal file
133
arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
Normal file
@ -0,0 +1,133 @@
|
||||
/*
|
||||
* Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Vincent Donnefort <vdonnefort@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here are some information allowing to identify the device:
|
||||
*
|
||||
* Product name : Seagate NAS 4-Bay
|
||||
* Code name (board/PCB) : Dart 4-Bay
|
||||
* Model name (case sticker) : SRPD40
|
||||
* Material desc (product spec) : STCUxxxxxxx
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-370-seagate-nas-xbay.dtsi"
|
||||
#include <dt-bindings/leds/leds-ns2.h>
|
||||
|
||||
/ {
|
||||
model = "Seagate NAS 4-Bay (Dart, SRPD40)";
|
||||
compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
soc {
|
||||
pcie-controller {
|
||||
/* SATA AHCI controller 88SE9170 */
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
mdio {
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ge1_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
/* I2C GPIO expander (PCA9554A) */
|
||||
pca9554: pca9554@21 {
|
||||
compatible = "nxp,pca9554";
|
||||
reg = <0x21>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "SATA2 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "SATA3 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
red-sata2 {
|
||||
label = "dart:red:sata2";
|
||||
gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red-sata3 {
|
||||
label = "dart:red:sata3";
|
||||
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds-ns2 {
|
||||
compatible = "lacie,ns2-leds";
|
||||
|
||||
white-sata2 {
|
||||
label = "dart:white:sata2";
|
||||
cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
|
||||
slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
|
||||
num-modes = <4>;
|
||||
modes-map = <NS_V2_LED_SATA 0 0
|
||||
NS_V2_LED_OFF 0 1
|
||||
NS_V2_LED_ON 1 0
|
||||
NS_V2_LED_ON 1 1>;
|
||||
};
|
||||
white-sata3 {
|
||||
label = "dart:white:sata3";
|
||||
cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
|
||||
slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
|
||||
num-modes = <4>;
|
||||
modes-map = <NS_V2_LED_SATA 0 0
|
||||
NS_V2_LED_OFF 0 1
|
||||
NS_V2_LED_ON 1 0
|
||||
NS_V2_LED_ON 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
gpio-fan,speed-map =
|
||||
< 0 3
|
||||
800 2
|
||||
1050 1
|
||||
1300 0>;
|
||||
};
|
||||
};
|
||||
231
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
Normal file
231
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
Normal file
@ -0,0 +1,231 @@
|
||||
/*
|
||||
* Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Vincent Donnefort <vdonnefort@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
|
||||
*/
|
||||
|
||||
#include "armada-370.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
/* USB 3.0 bridge ASM1042A */
|
||||
pcie@2,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@a0000 {
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio {
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ge0_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
/* RTC - NXP 8563T (second source) */
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
interrupts = <110>;
|
||||
};
|
||||
/* RTC - MCP7940NT */
|
||||
rtc@6f {
|
||||
compatible = "microchip,mcp7941x";
|
||||
reg = <0x6f>;
|
||||
interrupts = <110>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x300000>;
|
||||
};
|
||||
partition@300000 {
|
||||
label = "device-tree";
|
||||
reg = <0x300000 0x20000>;
|
||||
};
|
||||
partition@320000 {
|
||||
label = "linux";
|
||||
reg = <0x320000 0x2000000>;
|
||||
};
|
||||
partition@2320000 {
|
||||
label = "rootfs";
|
||||
reg = <0x2320000 0xdce0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "SATA0 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "SATA1 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
|
||||
&gpio2 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@1 {
|
||||
label = "Power button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
button@2 {
|
||||
label = "Backup button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
button@3 {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
white-power {
|
||||
label = "dart:white:power";
|
||||
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "timer";
|
||||
|
||||
};
|
||||
red-power {
|
||||
label = "dart:red:power";
|
||||
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-sata0 {
|
||||
label = "dart:red:sata0";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red-sata1 {
|
||||
label = "dart:red:sata1";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd0_led_sata_pin: hdd0-led-sata-pin {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "sata1";
|
||||
};
|
||||
hdd0_led_gpio_pin: hdd0-led-gpio-pin {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
hdd1_led_sata_pin: hdd1-led-sata-pin {
|
||||
marvell,pins = "mpp57";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
hdd1_led_gpio_pin: hdd1-led-gpio-pin {
|
||||
marvell,pins = "mpp57";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
51
arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
Normal file
51
arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
Normal file
@ -0,0 +1,51 @@
|
||||
/*
|
||||
* Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Simon Guinot <simon.guinot@sequanux.org>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here are some information allowing to identify the device:
|
||||
*
|
||||
* Product name : Seagate Personal Cloud 2-Bay
|
||||
* Code name (board/PCB) : Cumulus Max
|
||||
* Model name (case sticker) : SRN22C
|
||||
* Material desc (product spec) : STCSxxxxxxx
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-370-seagate-personal-cloud.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
|
||||
compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
soc {
|
||||
internal-regs {
|
||||
sata@a0000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "SATA1 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
37
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
Normal file
37
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
Normal file
@ -0,0 +1,37 @@
|
||||
/*
|
||||
* Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Simon Guinot <simon.guinot@sequanux.org>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here are some information allowing to identify the device:
|
||||
*
|
||||
* Product name : Seagate Personal Cloud
|
||||
* Code name (board/PCB) : Cumulus
|
||||
* Model name (case sticker) : SRN21C
|
||||
* Material desc (product spec) : STCRxxxxxxx
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-370-seagate-personal-cloud.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Seagate Personal Cloud (Cumulus, SRN21C)";
|
||||
compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
soc {
|
||||
internal-regs {
|
||||
sata@a0000 {
|
||||
status = "okay";
|
||||
nr-ports = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
178
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
Normal file
178
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
Normal file
@ -0,0 +1,178 @@
|
||||
/*
|
||||
* Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
|
||||
* (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Simon Guinot <simon.guinot@sequanux.org>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* TODO: add support for the white SATA LED.
|
||||
*/
|
||||
|
||||
#include "armada-370.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
/* USB 3.0 Bridge ASM1042A */
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
coherency-fabric@20200 {
|
||||
broken-idle;
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio {
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ge1_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&spi0_pins2>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
/* MX25L8006E */
|
||||
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "USB Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "SATA0 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@1 {
|
||||
label = "Power button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
button@2 {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
button@3 {
|
||||
label = "USB VBUS error";
|
||||
linux,code = <KEY_UNKNOWN>;
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-sata0 {
|
||||
label = "cumulus:red:sata0";
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&sata_led_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
sata_led_pin: sata-led-pin {
|
||||
marvell,pins = "mpp60";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
gpio_led_pin: gpio-led-pin {
|
||||
marvell,pins = "mpp60";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
@ -207,8 +207,21 @@
|
||||
sdhci@d8000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhci_pins>;
|
||||
cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
/*
|
||||
* A388-GP board v1.5 and higher replace
|
||||
* hitherto card detection method based on GPIO
|
||||
* with the one using DAT3 pin. As they are
|
||||
* incompatible, software-based polling is
|
||||
* enabled with 'broken-cd' property. For boards
|
||||
* older than v1.5 it can be replaced with:
|
||||
* 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
|
||||
* whereas for the newer ones following can be
|
||||
* used instead:
|
||||
* 'dat3-cd;'
|
||||
* 'cd-inverted;'
|
||||
*/
|
||||
broken-cd;
|
||||
wp-inverted;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
|
||||
@ -90,41 +90,10 @@
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
/* Two rear eSATA ports */
|
||||
sata@a0000 {
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
status = "okay";
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
/* Front USB 2.0 port */
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
/* RTC is provided by Intersil ISL12057 I2C RTC chip */
|
||||
rtc@10300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
@ -132,12 +101,6 @@
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
isl12057: isl12057@68 {
|
||||
compatible = "isil,isl12057";
|
||||
reg = <0x68>;
|
||||
isil,irq2-can-wakeup-machine;
|
||||
};
|
||||
|
||||
/* Controller for rear fan #1 of 3 (Protechnic
|
||||
* MGT4012XB-O20, 8000RPM) near eSATA port */
|
||||
g762_fan1: g762@3e {
|
||||
@ -174,6 +137,49 @@
|
||||
compatible = "gmt,g751";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
isl12057: isl12057@68 {
|
||||
compatible = "isil,isl12057";
|
||||
reg = <0x68>;
|
||||
isil,irq2-can-wakeup-machine;
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Front USB 2.0 port */
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio {
|
||||
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
status = "okay";
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
/* Two rear eSATA ports */
|
||||
sata@a0000 {
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
|
||||
Loading…
Reference in New Issue
Block a user